The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The red-tailed monkey (Cercopithecus ascanius) is a small, alert and active animal inhabiting forests with dense vegetation and as such hard to observe in its natural habitat. The principal aim of this study was to scrutinize whether the methods, previously used in a behavioural study of the blue monkey (Cercopithecus mitis) can be applied in studies of the red-tailed monkey?s behaviour as well. Additionally, habitat preference and foraging behaviour of the red-tailed monkey were examined. The study was carried out between the 16th and the 22nd of March 2009 in the Sabaringo forest, located on the western border of the Masai Mara National Reserve.

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

After I heard that two deadly accidents in farming 2003 were created by work with cattle, I got the idea of writing this degree project. So far there are not too many reports written about safety for the worker nor the animal. Therefore it will fit in with a report about safe handling of free stalled cattle. The Swedish Board of Agriculture would also like to do an information material about outside stalled cattle with this degree project as a background. The collecting of material was made by visiting farmers. The goal was to visit 15 ? 20 herds and when this is being written 19 herds have been visited.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Metabolic diseases in dairy cows are considered to increase the risk for claw lesions, most of all laminitis, sole haemorrhages and sole ulcers, but also to increase the risk for environmental claw lesions. The aim of this study was to compare claw health in 27 Swedish dairy farms, 18 with high incidence of metabolic diseases and 9 with low incidence. Data on claw health status was retrieved from recordings at routine claw trimmings and analysed on herd level regarding the prevalence of: any lesion, interdigital dermatitis, heel-horn erosion, sole haemorrhages, sole ulcer, lameness, abnormal claw shape, and other diseases (abscess in the white line, limb disorders, double sole, laminitic groove, white line disease, interdigital phlegmon, interdigital hyperplasia, toe abscess and verucose dermatitis). Mean prevalence of any lesion for herds with low incidence of metabolic diseases was 48 % and in herds with high incidence 41 %, and there was no statistical difference between the two groups. Mean prevalence for interdigital dermatitis was 2,0 % and 6.4 % in the low and high incidence groups, respectively (p.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

Wermland was affected by the Spanish flu like the Swedish national average, about a half percentage of Wermlands population would lose their lives to the flu during the autumn 1918. The flu has for many fallen into oblivion. This oblivion is so wide spread that it´s possible to talk about a "collective forgetfulness". The society have selected to remember 1918 for "when the guns went quiet on the western front" and not for the millions who died from the treacherous Spanish flu. The world had already suffered enough from the four years of war that had been fought, thus the victims of the flu would be honored but would soon fade in to oblivion.  When you investigate deeper you get the picture that the national average don´t do Wermland and its cities or rural areas any justice when a large variations seems to occur within regional areas.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Being a patient in intensive care can be experienced terrifying. Studies have demonstrated the link between unpleasant memories of hospitalization in the ICU and the development of posttraumatic stress disorder, depression, anxiety, and perception of quality of life in its aftermath. Placed on a ventilator, the patient is exposed to multiple invasive procedures. The aim was to describe critical care patients' experience of being intubated or tracheostomated. Method: Literature review using conventional content analysis.

Most of the goats in the world exist in the developing countries where they are important in the meat industry. In Europe, goats are mostly kept for milk production although the interest for meat is growing. Goats have a thin carcass with only small amounts of intramuscular fat, which gives a lean meat. This thin subcutaneous fat cover can cause cold shortening when chilling the carcass. By using electrical stimulation cold shortening can be prevented.

Feed costs constitute a large part of the expenses of dairy farmers. Pasture is a high quality feed with a low cost. However, feeding with concentrates has been shown to enhance milk yield (Leaver, 1985; Bargo et al., 2003; Stockdale, 2004). The purpose with this study was to investigate how milk yield and milk composition were affected as the concentrate proportion in the diet decreased. Pasture behaviour was examined to see if the different concentrate levels affected the time cows spent grazing and ruminating.