This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

AbstractConsider a ?uid being heated from below. The heating leads to an upward convectiveforce that is counteracted by the viscous forces of the ?uid. If the convectiveforce is large enough in comparison to the viscous forces the ?uid will be put in anunstable state.

This paper examines whether membership in the European Union has contributed to democratic stability and integration in an ethnic diverse society. By studying the Latvian multicultural society, before and after membership in the EU, the author is looking for evidence of enhanced ethnic stability in the country brought through European integration. The author will analyze what the consequences have been, by adopting European regional policy, for a country that yet has to create a unified national identity. By analyzing different areas of the Latvian society, the author has concluded that the EU has played a small but yet not insignificant role for the Latvian domestic integration process..

The objective of this study was to get a better understanding of how the cultivation methods influence the vitality in Prunus avium. The purpose was also to examine if there was any differences in shoot growth and trunk expansion depending on the method of cultivation. To find the answer to this question a literature study and a case study has been done. The literature study concerns the concepts vitality and stress. Different definitions of these concepts are shown and their connection whit establishment is explained. In the background the species Prunus avium, and the four method of cultivation that are included in this case study are described. Measurements of the shoot growth and trunk expansion were made in this study, and as a complement to these methods, a visual estimate of the vitality was made.

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

Introduction: The world is changing rapidly and the uncertainty that characterizes today´s society makes companies preparations for the future crucial. Purpose: To examine how CEO:s in small companies look at the future and what kind of preparations they make in order to meet it. Hereby, our ambition is to find out whether there is a difference between companies working in industries characterized by different degrees of stability. Mode of procedure: The purpose of this thesis has been fulfilled by interviews with four CEO:s from industries characterized by different degrees of stability. Result: The companies working in relatively unstable environments tended to be relatively more flexible and have an emergent strategy formation process, whereas companies working in relatively stable environments displayed relatively less flexibility and tended to have a planning strategy formation process..

Människans balanssystem kan beskrivas utifrån tre delkomponenter, det vestibulära, det visuella och det somatosensoriska systemet. En rad olika skador och sjukdomar som påverkar dessa system stör därmed också balansen. Balansstörningar kan verifieras med hjälp av funktionella tester eller teknisk utrustning. Då teknisk utrustning används är det vanligt att instrument utnyttjas med kraftplattor i syfte att mäta det posturala svajet hos patienterna. Vid balansutvärdering är det viktigt att de instrument som används är validitets och reliabilitetstestade.

As a consequence of a turbulent financial market with recurring recessions, the Basel regime was developed, an institutional change with the purpose to create enhanced financial stability through increased capital requirements and increased scrutiny of internal procedures. The Basel regime is an often recurring element in social debates where various aspects are discussed, one of which is whether it maintains its purpose to secure financial stability or whether it is cost effective, and if not, who gets affected by these potential costs.The majority of previously conducted research within this area agrees with the opinion that changes in the regulatory framework within the financial markets, such as the Basel regime, has led to reduced risk of bankruptcy for the banks which has contributed to increased global financial stability. However, research illustrates that these types of changes in the regulatory framework impose a financial burden leading to contradictions in the division of these costs between costumers and shareholders. This dissertation has been conducted from a shareholders perspective, out of which the study ?s three hypothesis has been created from.The data in this study is built upon the stock price from the three largest available banks? shares (based on total assets), in the 26 countries which are represented in the Basel committee from (2007) to (2013).

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.

Composting is a process in which organic matter is mineralized by microorganisms. In January 2005 landfilling of organic waste was prohibited in Sweden. With this prohibition composting has become an important alternative to handle the produced organic wastes. One problem with continuous small-scale composting is the production of organic acids that will inhibit a further composting process. The aim of these theses was to study what effects temperature and dry matter content had on the production of organics acids, and what effect the organic acids had on the mineralisation of the substrate as well as the stability during storage of the product.

SCA has today almost 300 000 hectares of their forest land planted with lodgepole pine(Pinus contorta var. latifolia). Due to initial extensive planting in the 1970ies the area oflodgepole pine forests in the thinning age has grown rapidly from the end of the 1990ies.During the years 1996-2005 first commercial thinning of lodgepole pine at SCA took place.The goal of the hereby presented study was to investigate the growth and stability in thosefirstly-thinned lodgepole pine stands a few years after thinning. Furthermore, the objectivewas to investigate the relationship between stand stability and different stand parameters.Additionally, lodgepole pine stem quality was estimated.The study is mainly based on the data collected during an inventory project carried out atSCA in 2008. Altogether 91 lodgepole pine stands in northern Sweden were measured afterthe first thinning.

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

This master thesis is about designing and dimensioning a boat for transport of caravan, car, trailer or ATV. Buoyancy and stability are important properties as the pontoonboat should also be able to serve as a workboat. Many of the vessels on the market today that is being used for similar purpose are stable enough, but their hull is often similar with barges and thus too slow. This work has been to construct a boat that has good stability but also has a hull that enables it to move faster, is more maneuverable and having a more attracting design than today?s barges.

The engine of JAS 39 Gripen, RM12, has recently been equipped with a new flameholder and a new engine inlet. This change has caused an increased noise level from the engine when the afterburner is in use. The noise level reaches its peak when the afterburner is partially used. The problem is thought to be unstable combustion in the regions around the flameholder. A solution to the problem has been proposed by Volvo Aero.