Sveriges samlade skogsindustriföretag förutspår en förlust av marknadsandelar, eftersom man inte lyckas hålla samma tempo på produktionen som många andra länder. En orsak till detta är att skogsmaskinerna är för långsamma. Skotarna, vars uppgift är att förflytta virket från avverkningsplatsen till en uppsamlingsplats, bär en stor del av skulden. De hinner inte transportera virket tillräckligt snabbt. För att råda bot på detta ska en ny typ av skotare utvecklas, vars plattform inspireras av försvarsteknologi.

The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.

The contact company, LRF Konsult, is a consulting firm specialized in areas of law, real estate, finance and taxation. Discussions on the subject of agricultural improvement in the area of Lean, has primarily been driven by the Royal Swedish Academy of Agriculture and Forestry, where LRF Konsult also participated. This thesis can be seen as a preliminary study of how Lean can work within agricultural enterprises.The thesis primarily focuses on the possibilities dairy farms have to improve operations. What practical benefits they can obtain through the implementation of Lean. And how an implementation could take place.By visits to two dairy companies, and through interviewing their respective business leaders, an image of the companies activity for improvement, in connection to this thesis was established.

This survey was made during the summer of 2004 and the spring of 2005, on commission from the National Board of Forestry. The aim of this report was to investigate how often Norway spruce (Picea abies L. Karst), is planted on poor Scotch pine (Pinus Silvestries) sites and if it affects the yield of Norway spruce? In order to investigate this, data from 29 stands witch had a lower site index than T24 was collected. The investigated stands were situated in the southern-eastern Sweden. In 20 plots in each stand, the highest tree, age, number of seedlings, site index and tree species per stand were measured.

The aim of this master thesis is to study the integration in Sweden between forestry and bulky industries as fiber- and sawmilling companies. The analysis is based on theories about transaction cost economies and competitive strategy. The studied companies are active on the Swedish roundwood market. The buying actors on this market were divided into two groups; fiber- and sawmill industries. Three companies from each group were chosen subjectively by the author.

In this master thesis we suggest a recreational directed forest management plan for the Skedalaskogen. The forest is situated 10 kilometres east of the city of Halmstad and is owned by the municipality. We have in literature and in research investigated what people like and want in the forest, how to manage the forest for recreation according to for example tree species, mixtures and density. We tried to adapt the forestry methods more to recreational thinking. We have also looked at issues like what is rare and not rare in this part of the country according to nature and forest, where people live and which connection they have to the Skedalaskogen. The Skedalaskogen is a quite big area, totally 830 hectares. The area have about 100 000 visitors a year.

The Swedish forestry aims primarily maximize production and economical wins. However, especially urban forests have great qualities as space for recreation and children?s play, which means that other goals should lead the forests management. The Teleborg forest is a wooded area in Växjö, surrounded by urban dwellings, schools, nurseries etc. A great part of the forest was wind felled during the storm Gudrun in 2005 which changed the forest, earlier dominated by spruce, dramatically.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.