We are heading towards a huge switch of how energy is produced with fossil fuels being replaced by renewable energy sources. It is not difficult to replace the energy you use in the house and there is no need for futuristic technology. There are already many established products on the market such as high efficiency vacuum solar collectors, heat pumps & small wind power stations that can supply the energy being used in a house. The company Sol & Energiteknik SE AB in Huskvarna has many different products which can reduce the need for an outside energy distributor. An average house in Sweden uses 15 000 kWh for heating, 5000 kWh for tap water and 5000 kWh for electricity.

Today the Internet is used more and more as a transportation for information. Much of the information is confidential and should not be read by those not privileged. To protect the information from unauthorized access cryptography can be applied. The cryptography algorithms in use today all have their pros and cons. They are therefore suited for different applications.

The aim with this thesis is to investigate the risk management at the department Road construction, The National Road Administration Region Mälardalen. The aim is also to study how the risk management could be improved to better support the project leaders. Included in theses aims is to examine potential problems with the current risk management and to suggest changes. It is of utter importance to define the concept of risk, to study how risk can be measured and in which ways risk can be analyzed. In doing so, a literary study has be done and fourteen respondents has been interviewed.Risk is to be seen more as a concept than a quantity.

This thesis analyzes the consequences of ?Lex Uggla? ? a law concerning the boundaries between firm and individual with respect to wealth taxation ? for small businesses, with more than 3 million SEK in over-liquidity. There are two main findings of this thesis. Firstly, the wealth taxation of non-operational assets seems to be an inefficient tax which costs the Swedish welfare system much more than it generates. Secondly, the change in actions among entrepreneurs following the extensive news coverage following the tax authority?s charges against the company of the well-known artist, Magnus Uggla (hence ?Lex Uggla?) illustrates that neither changes of rules nor new applications of rules is necessarily sufficient for an agent to change course of action.

The purpose of this thesis is to analyse and propose improvements to the cost accounting system in use at an airline operating on the Swedish market. The choice of study object is based on the airline?s desire to have its cost accounting system evaluated. During the analysis we have identified a number of points where the current cost accounting system does not correspond to its intended purpose. These points include significant groups of costs not being considered in the current system, potential over capacity is not visible and logic connections between distribution keys and the use of resources are sometimes lacking.

In a business environment where the stakeholder perspective is evolving and sustainable development is receiving increased attention, it is of importance for companies to adjust. The demand and pressure is exerted from several stakeholders who force companies to take action and live up to the expectations because if failing to do so, negative consequences will most likely be the case. The attention of this study is on ABB Power Products (ABB PP) and their environment and working environment risk management. The aim of this thesis is to identify and describe how perceived environmental risks are managed and what the incentives are to work proactively to minimize the risks. The incentives for a proactive risk management strategy are researched through both a strategic and operational perspective.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

This thesis work is executed at Business Unit Ericsson Test Environment (BETE), in Linköping. BETE is the department at Ericsson, which is responsible for the operation and maintenance of the company's Operations Support System (OSS). Their management system was outdated and they wanted it to be updated and it also required new features. The database needed to be replaced and the data migrated to a new database without licensing costs. The system also needed a part where employees could manage existing users.As a programming language PHP was chosen for its dynamic possibilities, platform independence and good support for database intergration.

Reduced tillage has increased in Sweden during several years, primarily to decrease costs andincrease efficiency in crop production. Despite this, mouldboard ploughing is still the mostcommon primary tillage method on most farms. The aim with this thesis was to compare theuse of pesticides and the occurrence of weeds on ten farms in Skåne and ten farms inMälardalen that use different soil tillage systems. The object of the study was also to clarifywhy the farms had chosen their specific soil tillage system and the consequences it has had onweed occurrence and use of pesticides. The result showed a slightly higher use of pesticideson the farms that use reduced tillage.

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..

For many providers of ERP-system, Poland is one of the most valuable markets in Central andEastern Europe. The Polish market for ERP-systems is still a growing market, especially; wecan see the low utilization of ERP-systems among small and medium-sized enterprises. Thisis due to several factors, primarily the cost of implementing the system and the necessary infrastructure.Subsequently due to the lack of knowledge, where there is no sufficientknowledge of the benefits arising from the use of an ERP-system in their business, and thereis a fear within the companies that its business would start stagnating.This paper investigates the implementation process of a Polish consulting company whichworks towards small and medium-sized businesses. The key success factors will be studied inthe implementation of ERP-systems, and the instance factors of the interrelationship betweenthe consultant and client from a consultant perspective. The review of the literature has beenidentified and discussed in relevance to the empirical study.

Over the years, what people have considered as the center of Stockholm City has gone from the medieval Stortorget in Old Town to the contemporary Sergels Torg. But more recently it has become unclear how the area really works. It is difficult to say where the actual central part of Stockholm lies, because while the Central Station is where the majority of people arrive into town, it is not necessarily close to Sergelstorg (considered the center of town) or other attractive commercial areas. There's also another issue with where the center of Stockholm is located. The railways and roads running along Klarabergs Viaduct acts as a divide between the areas of Kungsholmen and Norrmalm; these rails, roads and water separate the two areas from each other. In response to this problem of area division, a plan is being made to construct a new district near the center to mend the gap between the districts. The idea is that the center of Stockholm city will become more lively and attractive. The plan includes building new housing, commercial areas and a larger terrace called Mälarterrassen. In addition, improved mobility within the area is being planned by having better public transportation lines like City banan and tram named Spårväg City construction, as well as more pedestrian areas shall make the area become a district to thrive in.How the area will actually operate in the future is still unclear and many questions still exist about how the area will be able to compete and, above all, integrate with the other districts. The parts considered to be most important for the area is the scale of residential property and an attractive area that keeps people in the area and to encourages them to pass through the area. Perhaps the best solution would be to have something special planned in this area that can attract people in the community ? a city park, for example?.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

Behovet inom FM att transportera militära förband i fredstid inför en övning eller vid mobilisering, har alltid varit stort inom Sverige. I och med att FM ominriktades så uppstod bl.a. förändringar av förbandstyper. Detta i kombination med den tekniska utvecklingen på civil och militär sida, kommer troligen att medföra både problem och möjligheter vid transport av militära förband i framtiden. Uppsatsens syfte är att analysera vilka möjligheter FM kan komma att ställas inför, avseende utnyttjande av civil och militär transportutrustning i framtiden.