In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

Svenska (engelska se nedan) Detta examensarbete är ett vårdprogram över Österby bruks köksträdgård. Österby bruk är beläget i norra Uppland cirka fem mil norr om Uppsala. Redan på 1500-talet började järnindustri växa fram på Österby. Österbys järnindustri kom att pågå fram till nedläggningen av Österbyverkan 1983. Dagens köksträdgård tillkom i och med den omgestaltning av hela herrgårdsanläggningen som startade på mitten av 1700-talet.

High housing- and construction costs is a fact in Sweden today. Prices on building materials more rapidly than producer price index for industrial goods. Prices tend to rise during market boom but does not adapt during diminishing demand. The effects of fading demand can rather be deduced through discounts and quotations. During 1992-1998 when the Swedish construction sector found it self in severe crisis the prices of construction materials kept rising more rapidly than PPI for industrial merchandise.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

The aim of this study is to make clear the conception ?Sustainable Urban Development? through an investigation dealing with how the sustainable goals are attained in today?s Swedish urban planning. And also try to clarify where and why sustainable development is failing or lacking. Besides that I have investigated how actors take position towards urban sustainability. The essay is based on a literature study about sustainable urban development and it?s changes through the time and place.

The aim with the literature study is to inform about the risks that exists in large dairy farms(with focus on mastitis and hoof health) and to inform about the milk industry in Sweden.Personal comments from two study visits (Nötcenter Viken and Vadsbo Mjölk AB) arelinked together with the literature and forms into a discussion regarding sustainableagriculture versus the milk cow's welfare.The profitability for Sweden's milk farmers have decreased because of the decreased milkprice and current inflation. This leads to an increase in herdsize in order to make a profit.The milk cow herds in Sweden becomes fewer year by year and the herdsize increases. Theincreased herdsize can cause a decrease in the time the farmer spends per animal. This canaffect early disease detection and prolong the animals suffering.Swedish Board of Agriculture published (2008) statistics showing that today's milk cow ismedicated primarily because of two reasons; mastitis or hoof problems. Mastitis is thereason to two thirds of all treatments that are carried out.

During recent years the use of TMR (total mixed rations) has increased in Swedish lamb production. For many years TMR has been used for cattle and hence the information and knowledge is vast, while the knowledge concerning sheep and TMR is more limited. The aim of this thesis is to present an overview of the scientific knowledge on the subject, and also to compile practical experience from sheep farmers using TMR. The thesis begins with a literature review where different aspects relevant to the usage of TMR are dealt with. It is concluded that there are differences between sheep and cattle that must be taken into account.

The goal of this work has been to search historical materials, to identify the park's historical development, to prepare proposals on measures and that work should be the basis for further research. The aim has been to train us in searching for and use of materials and to gain an understanding of the process of work with older plants. In the process we have sought and found materials in archives, through literary and oral sources, and email contacts. Because of its excellent location perched on an islet in the low landscape Näsbyholm was long a fortress. The old castle on Näsbyholm was from the late 1400s but the site was fortified much earlier. The islet was at this time completely surrounded by water and there was a drawbridge over the narrow waterline. The owners are liable since the late 1200s.

Att spara tid och resurser är något som är av stor vikt i dagens byggbransch. Ju snabbare ett arbete utförs desto mer pengar tjänar företaget. I detta examensarbete har författarna tittat på effektivisering av ritningshanteringen i olika delar av byggbranschen. Att kunna hitta bland ritningarna på ett enklare sätt och att slippa sortera ut gamla ritningar när nya kommer in, är något som skulle förenkla ritningshanteringen och snabba upp tempot.Författarna har tittat på programmet DDR ? Databas för Detaljer och Ritningar, som de anser kan förenkla ritningshanteringen.

The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.