This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

The project team has chosen to carry out the project itself. This is to be able to work more flexibly in the product development process and not be guided by some guidelines.Every day, we read in the media about a new truck burglary. The problem has become so common that we do not even notice it in the media. Each year the theft of 1 billion of Sweden and the entire 82 billion in Europe in 2008. This is an increase of 10 billion by 2007.

Syftet med denna studie var att undersöka ett maskinsystem för uttag av trädbränsle i klena gallringar i norra Västmanland och södra Dalarna för Mellanskog. Genom driftuppföljningsdata kunde produktiviteten och kostnaderna för maskinsystemet beräknas, samt kostnaderna för sönderdelning och transport och hur dessa förändras med transportavståndet till industri. Resultatet visar att skördarens produktivitet är beroende av storleken på skördad medelstam, samt att skotarens produktivitet sänks med ett ökat skotningsavstånd. Den totala kostnaden för drivningsarbetet för ett medelobjekt (sett till maskinsystemets produktivitet) i denna studie var 178 kr/m3f inklusive kostnader för flytt, planering och tillägg för vinst. Om man bortser från dessa kostnader uppgår kostnaden för skördaren till ca 88kr/m3f och kostnaderna för skotaren till ca 61kr/m3f. Att enbart sönderdela materialet kostar 58 kr/m3s och kostnaden för transport beror på tranportavståndet, ett längre avstånd innebär en högre kostnad.

Today?s political debate on environmental issues and environmental thinking, alongside the Swedish presidency of the EU and Climate Conferences shows that the environment is an important topic. Environment is important, not only in politics, but also for companies and the demand of environmental strategies and environmental reports has increased. This leads to an increased pressure on firms to begin to report on environmental concerns and to create active systems for environmental thinking.The aim of the present study is to examine why firms in the transport sector, mainly lorry transports, reports environmental aspects and what drives these companies to create these reports.Based on stakeholder and institutional theory we aim to examine to which extent stakeholders affects the environmental accounting and reporting. We also aim to explain how the organization is influenced to incorporate external and societal environmental procedures.

The craft of planners are planning for a better future. Knowledge about climate change, environment, health and availability effects the trend towards less car dependent societies in favour of public transport and active transport like walking and biking. This study takes place in Västerbotten, one of Sweden?s most north provinces with a population of 260 000 inhabitants. It is a sparsely populated area with two dominant cities, the other municipalities are largely unpopulated.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

This diploma work was performed because the company Sveriges BostadsrättsCentrum, with the abbreviation SBC, had a need to gain insight into how changes in the Work Environment Act and related regulations which took effect January 1, 2009 affecting their work with the work environment. The changes mean that the client may hand over his work environment responsibilities to a contractor and that he has to select so-called building work environment co-ordinators. At SBC they are working as representatives for tenant-owner's association when a construction is about to be carried out. The purpose was to ascertain how changes may affect the work at SBC. The diploma work intends to educate the staff at SBC how work with the work environment would look like if they met the regulatory requirements.

Msc in Logistics and Transport Management.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

Examensarbetet har genomförts i samarbete med konsultföretaget i3tex AB i Göteborg samt med Aircontainer Package System Sweden AB (APS) i Stockholm. APS utvecklar och säljer standardiserade och kundanpassade förpackningslösningar för att transportera temperaturkänsliga produkter. Ett av APS önskemål är att i framtiden kunna erbjuda fler alternativ av kylväskor. Ett av dem är en kylväska som skulle kunna användas vid transport av vacciner i svåra miljöer eftersom det idag inte finns med i deras utbud. Examensarbetet fokuseras därför på att ta APS befintliga blodväska som referens och att ta fram ett nytt koncept för transport av vacciner, samt utveckla ergonomiska egenskaper för att underlätta och optimera användningen för de som jobbar i fält på organisationer som t.ex.

This master thesis is about designing and dimensioning a boat for transport of caravan, car, trailer or ATV. Buoyancy and stability are important properties as the pontoonboat should also be able to serve as a workboat. Many of the vessels on the market today that is being used for similar purpose are stable enough, but their hull is often similar with barges and thus too slow. This work has been to construct a boat that has good stability but also has a hull that enables it to move faster, is more maneuverable and having a more attracting design than today?s barges.

Sweden's government is dedicated to the goal of having a vehicle fleet that is independent of fossil fuels by 2030. Achieving these goals requires, among other things, new types of fuel that give lower net emissions of carbon dioxide. The present market includes stations offering lowlevel blends of renewable fuels in conventional diesel as well as some stations offering renewable fuels only. The purpose of this study is to survey purchasers? attitudes to the use renewable fuels in roundwood and bioenergy transport in forest- and energy companies. The study was based on qualitative interviews through a combination of face-to-face meetings and telephone interviews with each sample group. The total number of respondents was ten (10), consisting of five (5) from forest companies and five (5) from energy companies. Transport service purchasers were generally positive to renewable fuels and considered these necessary in the future.

This master thesis is a study of how city cemeteries can be used and contributes to a socially sustainable urban development. Today sustainable development and sustainable urban development is something that more or less every organization is working with. Therefore it is also relevant to integrate our cemeteries in this work so that they can become a part of the sustainable urban development process.The thesis gives a basic understanding of sustainability as a concept and also defines socially sustainable (urban) development. The work then immerse itself in various types of park structures and how the relationship between the human individual and the public space work, to satisfy the needs that different people have.The literature study that has been made is also the base for the design of the walking interview that has been made for the two city cemeteries. The cemeteries that where studied where the Assistens cemetery in Copenhagen and the Eastern cemetery in Gothenburg.

This study deals with work environment from a legal perspective. The study includes legislative history, legislation today and one empirical study. The legislation that concerns work environment (health and safety) in Sweden today is found in the Swedish Work Environment Act (WEA), the Work Environment Ordinance (WEO), Provisions issued by the Work Environment Authority, related legislations and also collective agreements. The WEA, passed by the parliament in 1977, came into force on the 1st of July 1978 and it defines the framework for Provisions issued by the Work Environment Authority, which is an authority superintended by the Swedish government. These Provisions contain more detailed stipulations and obligations with reference to the working environment.

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.