AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

This thesis evaluates the user board of the elememtary school in Veberöd, Sweden. In this process an evaluation model is developed. The model itself gets evaluated in a meta-evaluation to improve the model for future use.The starting point of the evaluation is the deliberative democracy theory. Although Sweden is a representative democracy an official desire exists to have a democracy with deliberative qualities. The evaluation model is constructed to fit this context and is therefore, not only, set out from classical goal-based evaluation but also from deliberative democratic evaluation.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

En kostnadsjämförelse av fyra maskinsystem för sönderdelning och transport av GROT vid avlägg har utförts för att identifiera kostnadspåverkande faktorer samt finna de mest lönsamma maskinsystemen inom hanteringskedjan för GROT. Studerade maskinsystem var TOMO hugglink med en flisbil; Skotarburen flishugg och skopbil; Huggbil med lastväxlare och containersystem; Willibald kross och dumper med containersystem. Respektive maskinsystem körs av entreprenörer från Norra Skogsägarna och fakturerade kostnader från 15 utförda trakter per maskinsystem och entreprenör har analyserats med avseende på transportavstånd och avläggstorlek. Fakturerade kostnader har sedan jämförts med kostnader beräknade utifrån ekonomiska modeller med annuitetsmetoden och vetenskapliga rapporter som grund. I modellerna har medtagits fasta maskinkostnader, maskinutnyttjande, personalkostnader, rörliga kostnader samt förväntad prestation där prestationen utgjorts av ett medeltal från minst två vetenskapliga rapporter.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.

SammanfattningSyfte och frågeställningarSyftet med den här studien var att undersöka självrapporterad fysisk aktivitet och stillasittande hos personer med olika aktivitetsnivå på arbetet.    Skiljer sig den fysiska aktiviteten i olika domäner (transport, hem och fritid) respektive den totala fysiska aktiviteten utöver arbetet beroende på aktivitetsnivå på arbetet?Skiljer sig tiden stillasittande beroende på aktivitetsnivå på arbetet?MetodFör att uppfylla syftet valdes en kvantitativ metod med tvärsnittsdesign. Data samlades in med hjälp av enkäten International Physical Activity Questionnaire (lång version), där frågorna om fysisk aktivitet är uppdelade i fyra domäner; arbete, transport, hem och fritid och berör intensitet, frekvens och duration. Frågorna om stillasittande är uppdelade för vardag och helg. Urvalet bestod av personer som arbetade heltid och flera olika yrken inkluderades i studien.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

SammanfattningSyfteSyftet med studien är att undersöka hur studenter i Stockholm transporterar sig till och frånhögskola/universitet samt se deras förändringsbenägenhet att gå från inaktiv transport till aktivtransport.Frågeställning? Hur tar sig studenterna till sin högskola/universitet?? Vad påverkar deras val av transportmedel?? Vad kan få dem att välja ett aktivt transportmedel?MetodEn kvantitativ studie genomfördes där datainsamlingsmetoden var en webenkätundersökning viaprogrammet Defgo. Ett riktat urval skedde på målgruppspopulationen där samtliga rektorer förhögskolor samt universitet inom Stockholm stad tillhörande portalen ?Studera i Stockholm?tillfrågades via mail om deltagande, totalt nitton av tjugoen högskolor är anslutna till portalen. Urvalsgruppen kom att bestå av 541 respondenter på enkäten från tolv högskolor av totalt tjugoeninom Stockholm stad.