ABSTRACT Introduction: During the past 40 years the ambulance service in Sweden has evolved from mainly being a source of transport to today?s high-tech caring facilities that enable qualified care to start already in the patient?s home. This first level of care is now provided by registered nurses and registered nurses with specialist training in pre hospital care.At the same time as the care provided is becoming more advanced, results from studies demonstrate that the amount of dispatches to patients that lack the need for ambulance care and transport is increasing. Nurses in pre-hospital care possess the knowledge, training and authority to perform an initial assessment of patients and also treat patients according to local and national guidelines. After the treatment it would sometimes be possible for the patients to remain at home without having to use ambulance transport to an emergency department or in other cases find other means of transport to hospital.

Sustainability and the traffics impact on the environment have become increasingly central within spatial planning. For many years, planning has been focusing on building new roads - this has resulted in increased use of automobiles, which many believe is unsustainable in the longer term. Therefore, authorities at national, regional and local level want to increase the use of alternative transport modes ? such as walking, cycling and traveling by bus.The thesis intends to study if the Municipality of Umeå?s policies for sustainable development have led to an increased use of public transportation. The use of public transport in Umeå is also compared with developments at national level, in order to see if there are differences in the level and trend.

The bicycle is an individual means of transport. Many people prefer to cycle over short distances and in congested areas rather than take travel by car or public transport. This is a study of the use of bicycle as an option for commuting to work. It is a comparison between three cities: Stockholm, Copenhagen and London. The comparison is focused on solutions that benefit commuter cyclist and performed by studying cycle policies and other related documents.

Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Corporate Social Responsibility, ett företags samhällsansvar, har på senare år fått större plats i näringslivet. CSR bygger på idén att företag frivilligt redovisar vilket socialt, etiskt, miljömässigt och ekonomiskt ansvar de tar inför sina intressenter. En företagsbransch med daglig inverkan på världens samhälle är livsmedelsbranschen. Branschen har ett välutvecklat och komplext logistiksystem där transportverksamheten är en central funktion. Syftet med denna studie är att beskriva och utvärdera dagens CSR-arbete ur ett miljöperspektiv inom livsmedelsbranschens transportverksamhet.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This thesis has been done on a haulage contractor company named GP-Last (AB Gustav Perssons Åkeri) and the purpose with the paper was to analyse their traffic from Malmö to Stockholm and leave suggestions on efforts that GP-Last can use to increase their level of transportation quality. This has been done with two main questions, which problem do they have today and which efforts they need to do to solve their problems? Through a case study with interviews as method to collect data it showed that GP-Last had four main problems.        Not enough information about their freights. The transport planning unit in Malmö doesn?t have the exact delivery address when GP-Last begins to bring in the gods.        There are no clear routes.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Syftet med studien var att beskriva specialistsjuksköterskors erfarenheter av att vårda kritiskt sjuka personer inom flygmedicinsk transport. Totalt intervjuades sju intensivvårdssjuksköterskor vid två sjukhus med helikopterverksamhet knutna till sig. En kvalitativ tematisk innehållsanalys utfördes på intervjuerna och resulterade i ett tema och sex kategorier. Temat som framkom var Säker intensivvård under flygmedicinsk transport. Kategorierna som framkom var Att egen erfarenhet och teamsamarbete behövs i svåra situationer, Att ställas inför dilemmat om närstående kan närvara eller ej, Att känna patientens och egen rädsla, Att uppleva vårdmiljön som en intensivvårdsplats med begränsat utrymme, Att en högljudd miljö försvårar kommunikationen under pågående flygtransport, Att planera och kontrollera för att minimera risker.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

Syfte och frågeställningar:Syftet med studien är att kartlägga skolelevers transporter på en skola i en stödjande miljö.- Hur stor andel av eleverna använder aktiv transport?- Vilka faktorer påverkar de elever som inte använder aktiv transport till och från skolani en stödjande miljö?Metod:Studien genomfördes med en enkätundersökning som delades ut till sammanlagt 63 av 75 eleveri årskurs fyra på en skola i en söderförort till Stockholm. Det externa bortfallet bestod av deelever som av någon anledning inte var i skolan på undersökningsdagen. Skolan ligger i enstödjande miljö för fysik aktivitet. En pilotundersökning genomfördes på ca 60 elever i årskursfem där synpunkter kunde lyftas fram och enkäten reviderades innan den slutligaundersökningen.Resultat:50/63 elever använde någon form av aktiv transport till skolan.

Det har blivit allt vanligare att ta med sin hund på resa, vilket bland annat kan bero på att det numera är både billigare och lättare att resa med hundar, sedan Jordbruksverket 1 januari 2012 införde nya regler rörande införsel av hund. I denna litteraturstudie sammanställs tillgänglig litteratur för att undersöka hur sällskapshundar påverkas av stress och om transport är stressande, samt vilka faktorer som är av betydelse under transporten. Stress kan ge både fysisk och psykisk påverkan och på sikt påverka immunförsvaret och öka mottagligheten för infektioner. I flera studier på olika djurslag har en ökning av bland annat hormonerna kortisol, adrenalin och noradrenalin uppmätts vid stress. Olika typer av beteendeförändringar kan också uppkomma i samband med stressfyllda situationer, men vilka beteenden som uppkommer varierar mellan individer och olika stressorer.

Detta examensarbete, på uppdrag av Atlas Copco Rock Drills AB, syftar till att kartlägga de problem gällande vibrationer som finns och uppstår vid användandet av produkten Scaletec MC och komma med förslag till lösningar på ett nytt system som bättre hanterar vibrationer än det befintliga. Lösningarna är avgränsade till hytten och hyttens koppling mot ramen. Kartläggningen av Scaletec MC visade att den största problemskaparen är den långa bommen med den tunga hydraulhammaren framtill. Den skapar rörelse i hytten både vid skrotning och vid transport. Vid transport är även den odämpade stolen, de ojämna vägarna och det faktum att axlarna är stela ett stort problem som genererar helkroppsvibrationer hos operatören.