Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Corporate Social Responsibility, ett företags samhällsansvar, har på senare år fått större plats i näringslivet. CSR bygger på idén att företag frivilligt redovisar vilket socialt, etiskt, miljömässigt och ekonomiskt ansvar de tar inför sina intressenter. En företagsbransch med daglig inverkan på världens samhälle är livsmedelsbranschen. Branschen har ett välutvecklat och komplext logistiksystem där transportverksamheten är en central funktion. Syftet med denna studie är att beskriva och utvärdera dagens CSR-arbete ur ett miljöperspektiv inom livsmedelsbranschens transportverksamhet.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

Title: Creating high awareness ? A study in how a company can create awareness with cost efficient marketing methods. (Skapande av hög medvetenhet ? En studie i hur ett företag kan skapa medvetenhet med kostnadseffektiva marknadsförings metoder).Authors: Alexander Edlund and Fredrik HanssonAim: Our aim is to reveal the pros and cons of cost efficient marketing and decide which cost efficient method works best in creating awareness. We also want to determine if the methods can be integrated in a successful way to achieve greater awareness.Method/Material: We have made a qualitative approach by conducting three in depth interviews with the company Bluetooth SIG?s marketing director Anders Edlund.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

Today Scania give a high priority to the continuous improvements on the quality of their vehicles. To follow up the flaws in product quality, which are recognized by the repairs at the local workshops, material requests are carried through to be able to analyze the defects at the plant in Södertälje ? in purpose to improve the product quality. The material requests are also carried through to compensate the workshop for their expenses and to check that they are working according to the company?s warranty manual.Due to local routines and different distribution structures at the different markets the lead times and the costs caused by the flow of material are hard to estimate.

This thesis has been done on a haulage contractor company named GP-Last (AB Gustav Perssons Åkeri) and the purpose with the paper was to analyse their traffic from Malmö to Stockholm and leave suggestions on efforts that GP-Last can use to increase their level of transportation quality. This has been done with two main questions, which problem do they have today and which efforts they need to do to solve their problems? Through a case study with interviews as method to collect data it showed that GP-Last had four main problems.        Not enough information about their freights. The transport planning unit in Malmö doesn?t have the exact delivery address when GP-Last begins to bring in the gods.        There are no clear routes.

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the unloading at road-site was studied. The goal was to describe the differences in time consumption between unloading two-sided or single-sided (only from side of the road) and also the difference between unloading with three and four assortments in the carrier.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

The cost of transportation has strongly increased in the recent years, transportations which are a major part for the construction companies. Skanska Asphalt which is a part of Skanska Sverige AB has noticed that there are significant cost savings to be made with the purchasing of transports. The transports in this case is about asphalt, where the costs are about 10% of the outsourcing business turnover. The purpose of this thesis is to study the working practice that Skanska Asphalt are using today in controlling and time-writing, for the asphalt transportations. Resulting in recommendations on how to improve the working practice at Skanska Asphalt.This study was conducted with the help of a number of interviews with Skanska?s employees and with suppliers of transportation to describe the practices which are being used in during the asphalt transportation.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

In a time of economic turmoil and financial crisis profitability matters rise higher and higher on company agendas. Many companies are pressured to find profitability to avoid layoffs or even bankruptcy. Profitability essentially depends on the margin on the product or service sold and the costs associated with selling these products or services and hence these areas are of vital importance if companies are to improve profitability. Previous research has focused, for the most part, on product profitability while customer profitability has received less attention. This study is based on a case study of a Swedish publishing house and aims to investigate how the company?s Cost-to-Serve varies between its distribution channels.

Syftet med studien var att beskriva specialistsjuksköterskors erfarenheter av att vårda kritiskt sjuka personer inom flygmedicinsk transport. Totalt intervjuades sju intensivvårdssjuksköterskor vid två sjukhus med helikopterverksamhet knutna till sig. En kvalitativ tematisk innehållsanalys utfördes på intervjuerna och resulterade i ett tema och sex kategorier. Temat som framkom var Säker intensivvård under flygmedicinsk transport. Kategorierna som framkom var Att egen erfarenhet och teamsamarbete behövs i svåra situationer, Att ställas inför dilemmat om närstående kan närvara eller ej, Att känna patientens och egen rädsla, Att uppleva vårdmiljön som en intensivvårdsplats med begränsat utrymme, Att en högljudd miljö försvårar kommunikationen under pågående flygtransport, Att planera och kontrollera för att minimera risker.

The basis of road investments is to minimize the transportation cost. The forest industry wants roundwood to be available during the whole year. One way of determine which road to invest in is to do a cost/benefit calculation. SCA Forest lacks a uniform approach to determine the utility of a road investment. The goal of this report is to describe how the organization works today and find areas of improvement. The data collection was done through interviews.