Large amounts of phosphorus (P) are lost from the arable land due to water erosion. Both phosphorus attached to particles and dissolved phosphorus (mainly phosphate) are transported away with drainage-water and surface runoff. Good soil structure is important in minimizing these losses. In this study, soils from 50 fields were analysed with respect to aggregate stability as measured by dispersion of clay together with the content of total phosphorus (TotP), particulate phosphorus (PP) and phosphate phosphorus (PO4P) in the water phase. All soils were clay soils with clay content varying between 21 and 54%.

Orust Kretsloppsakademi is a nonprofit organisation, with a goal of annually generate the same amount of electrical energy that is consumed. Orust is an island on the west coast of Sweden, north of Gothenburg. The population of 15 000 reaches 40 000 during summer, due to the large amount of vacationer. The total electricity demand is 174 GWh a year with a maximum power need of 32 MW. This report presents an analysis for the plausibility of their plan and from a power system stability perspective, the effects on the electrical grid.The conclusion is that the restraints for development of power generation from wind, solar and wave generation, are the power systems capability to transfer power, primarily in the transformers of the grid.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

System based models of plants rely on descriptions and assigned functions of genes, and currently 50% of the genes in Arabidopsis thaliana has either no assigned function or a function based on homology only. Mitogen activated protein kinases (MAPK's) are key players in cell signalling and are conserved among eukaryotes, though their targets are highly diverse. A recent study has described a small Arabidopsis protein (80), without homology to any described protein, as a phosphorylation target of the MAPK's MPK3/6. Further work established ?-glucan phosphorylase (PHS) as interacting with 80 and described a delayed senescence phenotype for 80 knock-out plants.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

The result from Requirements Engineering is a Requirements Specification. Characteristics of a good Requirements Specification are unambiguity, completeness, verifiability, consistency, modifiability, traceability, correctness and ranked for importance and/or stability.This work defines these quality attributes and answers the questions how to reach these attributes and the diffuculties which exist in this area.This work should be read to get an overwiew of the area Requirements Engineering and Requirements Specification..

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

Engblom, Gustav (2009) De nya riksdagspartierna och den politiska dagordningen ?The new parilament parties and the political agenda.?1988 and 1991 the swedish parties Miljöpartiet, Ny demokrati and Kristdemokratiska samlingspartiet made it over the 4 percent threshold and successfully entered the Swedish parliament. Sweden was once described as one of the most stable political systems in the world, but the parliament elections of 1988 and 1991 showed that Sweden was no exception from the growing instability in west democratic political systems.The stability and instability that followed in the west democratic political systems is believed to be explained by the political parties? efforts to adjust to changes in their political environment. This has lead them to cartelize and the cartel party is believed to prefer stability over triumph for various reasons.The established political parties are believed to be able to manipulate the political agenda in such a way that political topics that would have caused great turbulence in the political system, if debated, are kept away from the political agenda.

Detta examensarbete behandlar friktionen hos fluida och solida smörjmedel, under höga, upp till 2,5GPa, transienta tryck. Friktionsstudier har gjorts i en befintlig ?Ball and Bar utrustning? vid Luleå tekniska universitet. Utifrån dessa studier har kurvor som representerar friktionskoefficienten som funktion av tiden för 15 oljor vid olika tryck och temperatur erhållits. Exempel av dessa finns inkluderade i rapporten.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.