Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

The choice between bare-rooted and containerized seedlings in southern Sweden affects the investment costs as well as growth and survival. It is important to take these differences into account when choosing seedling type for reforestation. The most important differences between the two seedling-types is that bare-rooted seedlings has open root systems whereas the roots of containerized seedlings are grown in a container which may contain water and nutrients that are available for the seedling during the first period after planting. Moreover, bare-rooted seedlings are often older which results in thicker stembase and better resistance to attacks of pine-weevil (Hylobius abietis). In order to study differences in survival and growth between bare-rooted and containerized seedlings a survey study of newly planted clearcuts in south-western Sweden was made. In the study tree seedling types was included, one bare-rooted and two containerized with different ages. The population of pine weevils was probably low during the studied period which resulted in lower pine-weevil damage than normally found in this area.

Companies financed through borrowed capital are allowed a tax deduction for the costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

Introduction:By insight in the company and by monitoring the management, the board has an important function in creating trust in governance of the company. Furthermore, the board reduces the asymmetry of information between the owners and the management, which also is the function of the auditor, by auditing how the board governs the company and the accounting. In case the board does not effectively monitor the management, the auditor has to extend its monitoring, which increases the owners agency costs through the audit fee. The board composition can affect how effectively the board practices the monitoringProblem: How is the audit fee affected by the board composition?Purpose: The purpose of this study is to explain how the board composition affects the audit fee.Method: The study uses a quantitative method, where the data was collected from the annual reports of 112 limited companies listed on the NASDAQ OMX Large and Mid Cap lists on January 2, 2012.

In the town of Väderstad which lies in the middle of Sweden, called Östergötland is Väderstad-Verken situated. It´s an international company which produce machines for land processing and sown to farmers all over the world. Väderstad-Verken is an expansive company with 750 employees. The turnover is 1.4 billion sek. Rapid seed-sower has become a popular machine since it was introduced in 1991.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

As a forest owner you always have to consider hazards and uncertainty when planning your forestry actions. The aim with this report is to test my hypothesis that there is an overall difference between men and women when it comes to perception, estimation and management of hazards/risks in forestry. I will look into if there are differences in how men and women estimate risks in production forestry from an economical point of view. The aim is also to look into if there are differences between male and female private forest owners, in how they perceive and manage hazards in connection with a possible climate change. To fulfil this aim, an inquiry survey was undertaken in three different areas of Sweden, two areas in the south and one in the north. But in this report I have evaluated the three areas as a whole.

The financial crisis in 2008, effected companies around the globe and forced them to change their operational strategies, in order to survive. Companies with international links needed to consider external effects and due to that adapt their strategies on a global level. Demands for goods and service were decreasing and companies could only manage the cost during a recession to not face bankruptcy. Organisations need to reconsider their optimal strategy as this will determine their future outcome when managing a crisis as the one in 2008. British Airways - Air Cargo is a global company with an international network which serves about 80 countries, with about 200 destinations.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.