Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Syfte ? Examensarbetets syfte är att skapa förståelse kring ett outsourcingbeslut genom att utveckla en beslutsmodell för outsourcing. För att uppnå syftet ska följande frågeställningar besvaras:Vilka faktorer bör påverka ett outsourcingbeslut?Vilka kostnader bör analyseras för att ett outsourcingbeslut ska bli väl avvägt?Vilka komponenter bör ingå i en beslutsmodell för outsourcing?Metod ? Examensarbetet bygger på en analytisk konceptuell studie med ett deduktiv och induktiv förhållningssätt, där påverkansfaktorer togs fram genom litteraturstudier. Jämförelser och analyser av redan befintliga teorier gjordes för att identifiera påverkansfaktorer, utifrån dessa faktorer skapades en beslutsmodell för outsourcing.Resultat ? Resultatet från studien visar att det finns ett flertal olika faktorer som påverkar ett outsourcingbeslut och kan sammanfattningsvis placeras som påverkansfaktorer, strategiska- och konkurrensfaktorer samt kostnadsfaktorer.

In this thesis ? concerning didactics of literature ? I perform a reading and theoretical analysis of two pivotal works within reader-response theory, more precisely: Literature as Exploration (1938) and The Reader, the Text, the Poem ? The Transactional Theory of the Literary Work (1978), both written by Louise M. Rosenblatt. The object of this analysis is to examine whether Rosenblatts? theory and methodology can be used to accomplish understanding for ?the other?, what Martha C.

The purpose of this paper is to present and analyze the yearly expenses for Swedish rental apartments during the period 1999 to 2007. At the end, it will give the reader a general picture of how the cost-level has fluctuated depending on the production year when the apartment building was finished, and where the same building is located. This paper has the following questions as a starting point:- Can there be an identification of regions depending on where people tend to favor renting an apartment?- How are those regions distributed? That is, where are the cost-levels of the yearly rental expenses highest and where are the levels lowest?Nine statistical surveys from the Swedish government agency Statistics Sweden (Statistiska Centralbyrån) have been used as primary sources for this paper. These surveys deal with price pictures of housing in general, but for this paper the only information that has been used is the one about rental apartments.

Background: Operating on the stock market is associated with risks. If a particular asset is not traded with the same frequency as the average market asset, this particular asset is exposed to a liquidity risk. It means that the investor might not be able to sell the asset at a desired time without incurring expensive Transaction costs. The query is whether or not the investor is compensated with a liquidity premium for bearing the extra risk. Earlier studies on the Stockholm Stock Exchange have failed to prove that there is a relation between stock return and liquidity.

Many of today?s societies are built on established financial structures that are controlled by states and central banks. These structures are built on a clear perception of economic systems as established but invisible institutionalised concepts that are operated by millions of organizations worldwide. An idea of counteracting against centralized economies by introducing a currency that no state or bank controlled was developed in the beginning of the 20th century. In 2008 the idea was realised by the introduction of Bitcoin, which is a digital currency and transaction system without any centralized emitter or controlling organ.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

A large number of system development projects are allowed to proceed for too long, and leads to undesirable project outcomes. Research shows that more than half of the authorities involved reported that at least one of their projects have exceeded their budget, and that a third of all the projects had exceeded the budget. This problem led to the following research question: ?Which factors can explain projects continued escalation within public authorities?? To answer the question, a qualitative case study of the Swedish police?s implementation of PUST, a sort of case management system was conducted. The project received considerable media attention and a large amount of criticism was directed towards the project, partly because the project exceeded the timeframe and budget set at the start.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

Through the growing use and availability of information technology the dependency of Internet is today increasing. Internet makes ways for a more mobile business communication that cost less. One of the latest applications of Internet technology are intranet and extranet. I have asked myself the question how intranet and extranet can affect companies efficiency and competitive advantage. In order to answer this question I performed a case study at Ericsson and ABB.