This project is about Jönsaplan in Landskrona. Jönsaplan is situated at the center of Landskrona in a part called Södra centrum which the municipality is developing, mainly by building new residential buildings. Today, Jönsaplan is not a functioning square. This is due to a ferry terminal and its many fences that block the way for people. In this project, I have assumed that the ferry terminal will be moved somewhere else so that Jönsaplan can be a real square. By studying The Concise Townscape by Gordon Cullen and Byens uttrykksformer by Thomas Thiis - Evensen and three reference places, Daniaparken, Raoul Wallenbergs torg and Norr Mälarstrand, I came up with a number of guidelines for my design proposal for Jönsaplan.

Wildlife fences are today commonly used along highways to reduce the risk of vehicle collisions with wildlife. Since traffic and roads have expanded over the years, wildlife behaviour has become more interesting not only for the prevention of vehicle collisions but also to understand how human activities impact their natural habitats. Moose is one of those animals that have increased in interest in such studies. In this study, I tested if the probability to cross wildlife fences of moose would increase with increasing home range sizes, and also at what time of the year they cross. The study area is situated in Nordmaling municipality, located in Northern Sweden in the County of Västerbotten.

Current research shows that the number of door openings during surgery is unjustifiably high. It is the operating room nurses task to ensure a hygienic and aseptic environment throughout the surgery with the goal of minimizing the risk of healthcare associated infection. The study aims to investigate whether the operating room nurse is attentive to the number of door openings during surgery and if the operating room nurse is attentive to the reasons behind the door openings. A pilot study with nine observations was carried out on two smaller hospitals in the region of Västra Götaland. The results showed a significant underestimation of the rated door openings compared with the actual ones.

Along with the development of technology, the cross-border trade is increasing and therefore there is a need for greater consumer protection. A good consumer protection creates a feeling of safety for the consumer and that by itself may help to increase cross-border trade. This is one of the reasons for why the EU has established regulatory framework for electronic commerce, for example the Directive2000/31/EC. The direc-tive strives to create a similar law for electronic commerce within the European Union. This paper?s main purpose is to ensure that the directive is implemented properly in Swedish law, and if there are other possible ways to achieve the objective, other than the ones that the Swedish legislator has chosen.

The aim of this report is to investigate, on the basis of two consult agencies perspectives, what the possibilities and obstacles are to integrate the work with antagonistic and accident related risks. The report is based on two consult agencies where each agency´s work procedure is represented by a risk management method. The work with accident related and antagonistic risks is analysed and evaluated compared to four different components. The components are risk management process (IEC´s and FEMA´s model), driving forces, education and competence, and resources to control risk management with COSO?´s ERM framework.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

The relationship between dividend policy and investment is a controversial area and the relationship between these two may differ depending on the company's priorities. The study examines this more closely by studying dividend policy's impact on investment and how it differs depending on the company?s market capitalization. The study is based on companies listed on the OMX Stockholm within the segments Large Cap and Small Cap, during the period between 2003-2012. Secondary data was obtained from each company's annual reports where relevant data was used to operationalized into measurable variables.

This thesis is closely related to the Dynamically Self-Configuring Automotive System(DySCAS) project. DySCAS is a middleware for electronics in an automotive system. Thethesis work has been performed in cooperation with ENEA. Parts of the demonstrationplatform Self configurable High Availability and Policy based platform for Embeddedsystem (SHAPE) developed for the DySCAS project by ENEA have been used in theimplementation phase of this master thesis.The goal of this thesis was to evaluate how the Meteor MW, an offspring of the DySCASmiddleware, should handle QoS and to design a Quality of Service Manager (QoSM) for theMeteor MW that fulfilled hard real-time requirements. The thesis also had the objectiveof analysing and identifying the requirements on such a QoSM from a QoS perspective.Specifically the requirements to guarantee real-time support for applications running onthe MW.

This thesis has been carried out in cooperation with Burseryds Bruk AB.Burseryds Bruk is a company that manufactures steel strapping. The thesis isabout developing a concept of protection that should be used to protect theoperators from the rotating parts of the machinery lines. The aim of the projectwas to improve work safety for operators working at the machines by producing aconcept for a protective device. The project's first part was based on ergonomic data collection methods tounderstand the operations performed on the machine and the hazard occurringduring the process. The methods used to collect data were, interviews,observations and questionnaires with the operators of the company. This was thenused to make the ergonomic analyzes hierarchical task analysis and link analysis. The data collected from the company's operators was used create 10 conceptswhich were then evaluated.

This thesis examines how Swedish newspaper media problematize surveillance. This is done by analysing the media reports from two major surveillance events: the debate in 2008 about the legislation concerning the expansion of the rights of Försvarets Radioanstalt to monitor internet and telephone traffic crossing the Swedish borders, and the revealing of an ethnically based index including over 4000 individuals created by the Swedish police. The thesis sets out to expand the knowledge about media?s role as a interpreting source of information concerning how people understand and relate to surveillance (Barnard-Wills, 2011; Carlsson, 2009; Greenberg & Hier, 2009). The thesis attempts to answer the question whether Swedish media problematizations regarding the abovementioned surveillance events correlates with the most common theories of surveillance critique.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

No infrastructures today are growing faster then communication network. The requirement of being able to communicate in a fast and qualified environment to a low cost increases in line with the development and competition. Itera Networks is no exception when it comes to rapidly developing new and better network solutions for themselves and for their customers. With these requirements in mind their needs for an analysis of the existing communication solution becomes very obvious. This project contains such an analysis in which various studies of the existing network environment have been made.

Andelen människor som flyttar till städer ökar, vilket gör att det blir allt mer konkurrens om markytan. För att skapa fler bostäder tas mark i anspråk som tidigare haft andra syften eller bestått av naturliga grönytor. När växtlighet prioriteras bort minskar ekosystemtjänster som har förmåga att rena stadsluften. Denna studie baseras på Stockholm, där den regionala översiktsplaneringen åsyftar att staden ska förtätas för att skapa mer centrala bostäder. Att stadsluften är förorenad är ett generellt problem som utsätter invånare för hälsorisker. Detta är en fallstudie som granskar hur luftföroreningar uppmärksammas när nya bostadsprojekt är planerade att etableras.