Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

Several scenarios point toward a future where we are far more people on Earth than today, where most of those people will live in cities and where oil no longer dominates in the transport systems and in agriculture as an energy source and where less energy will be available to us. The report investigates what areas in traditional ecological knowledge that can contribute to the transition that follows a future with less energy and establishes three areas with the potential of becoming important: areaspecific biological knowledge in societies that are more dependent upon its surrounding environment and its natural prerequisitesthe local management of these biological resources, which often means a fair sharing and sustainable handling of the resources and which has been observed in Nobel price awarded Elinor Ostrom?s researchthe world views that lie behind how the environment is considered and managed, world views that can inspire and point toward how we in the future should formulate world views that do not give the destructive modern management of the environment It is also noted that the magnitude of the city living in the future is a historical news and that very little research has been done in how traditional knowledge can be transferred into this kind of living..

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

After the 9/11 attack the United States declared war against terrorism, which launched a conflict between indefinable transnational networks and states. In this war it became clear that the strategies used in traditional wars between states were not sufficient. New strategies have been discussed, but without any concrete results.In this thesis assassinations of terrorist leaders ordered by states is being presented as a possible strategy in the war against terrorism. Assassinations have been used in all times to shift political power but is today not morally accepted. This thesis aims to show that when used under the premisses of the just war theory, the strategy can be equally morally justified as any traditional war.

Farmed mink often perform stereotypic behaviours which is considered to be a sign of reduced welfare. Previous studies have shown that enriched cages can reduce the frequency of performed stereotypies. Most studies on mink in Sweden have been done on adults. The aim of this study was to investigate if larger enriched cages with two or four mink kits reduce stereotypies in mink kits during their growth period in comparison to traditional cages. In the present study the behaviours of mink kits that were kept in four different treatments at a private mink farm were recorded. Traditional cages with two mink kits were used as a reference and the other treatments consisted of larger cages with shelves with two kits, larger cages with shelves and a plastic cylinder with two kits, and larger cages with shelves with four kits.

The objective of this study was to investigate how the local newspaper readers felt about reading the local newspaper in a tablet device, such as the iPad. We wanted to study the attitudes from consumers towards tablets and if the traditional local newspaper can be substituted with a tablet device. We decided to use qualitative interviews as our method. The selection of respondents was based upon age, whether or not they had a subscription and if they owned a tablet device or not. We accomplished fifteen interviews with respondents living within the area where the newspapers of Barometern and Oskarshamnstidningen are spread. The study shows that the majority of the respondents who already had a subscription tended to lack interest in changing their traditional newspaper consumption. Their habits of reading the local news on paper were strong.

Launching and marketing a health food product is associated with larger problems than a launch of a traditional food product. There are several sales channels that can be used for a health food product, for example the product can be sold as a traditional food product, natural health food product or as a prescription drug. A smaller company can however experience problems while launching its product as a prescription drug because of the large costs associated with this particular sales channel. There is often no other alternative than to launch the product as a traditional food product, this can however create other problems because of the existing regulations on what can and cannot be mentioned in the marketing of a health food product. The limited amount of information about the product that can be enclosed together with it makes it hard for a company to differentiate and position it on the market.

Continuous improvement is one of five principles in General Motors ? Global Manufacturing System (GM-GMS). GM-GMS has been used by Saab Automobile AB since 2003 and is a central component for realisation of GM?s vision. Internal audits have discovered problems with one of the tools, practical problem solving (PPS), which needs to be improved.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

The purpose of this study is to focus on library service for children in a hospital, which in turn is seen in relation to a traditional children s library. Four aspects of library work were investigated. These aspects were working methods, partners of co-operation for the libraries, media policy (acquisition, use of the collection and circulation procedures), as well as programme activities for children.The research method was qualitative and comparative in nature, consisting of case studies of two libraries : (1) the library in a children s hospital, known as Bokskogen at Astrid Lindgren s children s hospital in Stockholm and (2) a traditional children s library, the children s department at Eslövs city library. In each library interviews were conducted. The investigation shows that the librarians in the hospital library must be more outreaching and active in order to stimulate children to use library materials.

Background: Budgets has always been a main factor for the management of organisations. Yet, lately has the role of budgets been increasingly questioned. But how is an organisation managed without budgets and what other alternatives can be used? And can these instruments work more effective?Purpose: The purpose of this essay is to describe how non-budget management distinguish compare to traditional management and how to design an effective non-budget system of management. Furthermore we intend to explain the reasons to such management and to present a model for how such a management can be performed.Research method: Empirical material has been performed based on seven interviews with persons within Svenska Handelsbanken.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

The purpose of our study is to see how an organization, and also a administrative authority, communicates by using social media. The organization in this case is the Swedish Police, because of their paradoxical problem with confidentiality versus openness and transparency. The Police has over a hundred Facebook-accounts, where they try to have a open dialogue with their publics without breaking the law of secrecy. Our general purpose of the study is also to see what the pros and cons are of having a own media channel, instead of the traditional media and their often anticipation twists.The result of the study showed that the three different police precincts, which we investigated in our essay, are working in three different ways. The gap may affect their overall reputation and trust gained by their publics.

Private religion is a faith that isn?t practiced in an organised religious community. Many people do not want to accept a religious concept that is already defined. To choose a conception of faith based upon personal preferences fits some modern man better. The purpose of this thesis is to examine if it?s possible to create a personal religion and how such a process looks.