Cloud computing diskuteras överallt trots det finns det fortfarande ingen gemensam syn på vad det egentligen är. Om tio specialister inom området fick frågan vad cloud computing innebär skulle tio olika svar ges. Om en definition på cloud görs har den inte en likadan betydelse som begreppet cloud computing. Ordet cloud är en vanlig metafor för Internet men när cloud kombineras med computing blir innebörden större och otydligare. Termen cloud i en striktare mening innebär användandet av datorresurser online snarare än över hela Internet.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 22,5 hp, 2014.

The manufacturing industry is currently in a short-term downturn while the competition is increasing. The result of this is that companies must find new ways to bring out their products. Traditional competitive strategies, such as low pricing, is not sufficient today as the customer is inquiring something more than just a good product. Higher demands are presented on an accurate, well functional, communication between customer and companies, as this has become an important strategic factor in achieving long-term profitability.The aim of this independent project was to analyze and evaluate the communication process between a company and its sales companies.In order to illustrate this process, a case study was carried out at Alfa Laval, their sales companies and employees at their distribution center in Tumba. In order to see the differences in attitudes between the management, the sales companies and the employees regarding communication and involvement a gap analysis were used.The theoretical part of the study considers theories about business mission, communication, involvement, quality and creating value.The result showed that a smaller gap exists between the sales companies and the management while a slightly larger one exists between the employees and the management.

This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

Protected Designation of Origin (PDO) is a quality control system created by the European Union (EU) to protect integrity of certain food and drinks that are produced in a specific area in a unique way. By protecting these products, the EU can certify that the traditional region-specific methods of food and drink production are preserved. The EU countries that follow such a system are mostly from Southern Europe. For instance in France, the PDO system has helped improve the income for farmers, boosted the rural development and assured protection for farmers against the abuse of their brand and the selling of their products by outsiders. In Sweden, there are no PDO products yet, instead there is Protected Geographical Indication (PGI) and Traditional Speciality Guarantee (TSG) that are not as protective as PDO.

New companies go public through Nasdaqs growth market First North constantly. The reasons for going public are many, and the interest at the moment is big. There are different ways to go public, the most common being the traditional IPO. This study is about the companies that have been listed on Nasdaq First North between 2008 and 2013 through traditional IPO, or by RTO (reverse takeover).The differences between these two ways of going public are that the IPOs are reviewed more thoroughly by Nasdaq and the market. This makes the study interesting, as the RTOs go public in a faster way, and avoid the review from outside parties largely.

Rapporten beskriver arbetsgången vid utvecklingen av ett kompressorkit till Yamahas snöskotermodell RX-1. Arbetet innefattar konstruktion och dimensionering av tryckkammare och laddluftkylare. Datorverktyg i form av CAD (Computer Aided Design) och FEA (Finite Element Analysis) har använts till att konstruera och dimensionera ingående komponenter. Arbetet har resulterat i kompletta CAD-modeller av ett prototypkit färdigt för CAM- beredning (Computer Aided Manufacturing) och tillverkning..

The work thesis was performed at Assalub a company which is situated in Åtvidaberg. The company works with developing, manufacturing and marketing equipment for handling of lubricants for light and heavier industry. The work thesis it is based on a inquiry Assalub got from MacGregor which is a company within cargo solution, from port to offshore system.For unloading grain and other material from the ship cargo it is used combined inlet feeder and screw conveyor, there the inlet feeder is drilling down through the cargo and feed the screw conveyer with material to further destination. At the bottom of the screw conveyer and the inlet feeder there is a bearing that keep the parts together. However the lubrication of the bearing must be made manually.

This essay is about the market of traditional rental movie stores, which today are on a mature stage of the marketing cycle. The technique is constantly accelerating and contributes to evaluation of new ways to watch movie. New competitors are such as bigger chain of stores that can offer, in addition to their wide range of other goods, rental movies as a secondary selling. The substitute is of most part Internet based services from where you can watch movie online or download film legally as well as illegally.These different sorts of new competitors or substitutes become a big threat on the traditional rental movie stores as these substitutes can offer the same prices or even lower.With these new ways of watching film this will on turn change the behaviours of the customers that likes to watch movies. The problem for the traditional rental movie stores is trying to keep their existing customers and try keeping them loyal to their store, so that they won?t loose them to the competitors and substitutes.

Technology evolves quickly, with innovative ideas growing everywhere. Still, no technology is anywhere near challenging the mouse and keyboard for navigation of your standard computer. This study focuses on comparing the traditional technologies of mouse and keyboard with the new technology of gestures - in this case Leap Motion - in purpose of finding how the usage differs and what the potential users want from the competing technology. The experiment was executed in a controlled environment, with as few external factors as possible. We found that although the test subjects found Leap Motion fun, the test subjects do not want to surf the web with gestures.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.