The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

To investigate effects of nitrogen on in-lake CO2 and CH4 production during winter, three pair of lakes was subject for a fertilizing experiment in which one lake in each pair was fertilized with nitric acid (HNO3) directly into the water column in the summer of 2012. The lakes in each pair are assumed to be morphologically, hydrologically and biologically similar, that is, the non-fertilized lakes are considered references. The pairs do differ in one major way by being progressively less humic, going from around 25 mg/l to 10 mg/l DOC. Sampling and analysis was carried out at the end of the frozen period in 2013. Results show a significantly higher concentration of both CO2 (p<0,001) and CH4 (?=0,1, p=0,053) between impact and reference sites in the two less humic pairs.

We have performed a case study on Acne Jeans, a creative Swedish fashion company, which initiated a cooperation with the Swedish venture capital firm Öresund. The aim of our paper was to examine what motivates a venture capital firm to transform the management control system of a creative company, into a more formal system of control. Main results: Öresund did not have an excessive impact on the management control system of Acne Jeans, due to three main reasons. First of all, Acne Jeans had a satisfactory management control system prior to the cooperation. Furthermore, the relationship between the two parties was characterized by mutual trust.

This study investigated the effects of rubber alley flooring on cow locomotion, claw and leg health, production, cleanliness, grooming behaviour and cow exclusion rate in a free stall herd. The study was conducted in a new dairy house with a rotary milking system, with a matched group of cows on traditional scraped concrete alleys used for comparison. All claws were trimmed and lesions recorded at the beginning and end of the 4-month study. Locomotion, claw and leg health, behaviour and hygiene were observed and scored at regular intervals during the study. The results showed that cows on rubber alley floors displayed significantly (p.

Svenska Kraftnät is (together with the other transmission system operators of the Nordic power system) responsible for keeping balance between the generated and demanded power in the Nordic power system. Spontaneous load variations and system disturbances, however, lead to power imbalance followed by frequency variations. The frequency deviations can be limited to an acceptable level by the spinning reserve, mainly by hydro power control. But there are also other system properties which have a great influence on the frequency and system stability. The frequency and voltage dependence of the loads have a direct influence on the power balance.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

Improved wireless datacommunication with the forest machines might be the next big step in the logging process. The use for wireless communicationsystems within the forestry is among other things to report the production from the forest machines, to supply the machine opera-tors with the right information and for safety. CDMA2000/ 450 is a third generation mobilecommunicationsystem which could replace the old NMT- 450 and for comparatively low costs. The reason for the low costs is that you only have to use the old NMT- 450 masts and supply them with new equipment. In the test of CDMA2000/450, that has taken place in northern Uppland, two kind of files have been sent.

Denna uppsats har för avsikt att utreda begreppet Just-In-Time (JIT) och dess komponenter för att sedan försöka finna dessa i den svenska lastbilstillverkaren Scanias produktionssystem. Litteratur har bidragit med en definition av JIT som sedan har jämförts med hur Scania arbetar inom produktionen. Empiri har erhållits genom intervjuer med berörd personal samt observationer på plats i Oskarshamn och i Södertälje.För japanerna är inte Just-In-Time-tänket en ny företeelse utan det är något de har arbetat efter en längre tid. Denna uppsats har valt att utgå från Jeffrey K. Likers (2004) definition i The Toyota Way.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

Inbyggda system blir allt vanligare i dagens samhälle. De inbyggda systemen finns i nästan allt nuförtiden, från diverse fordon till leksaker för barn.Dagens teknik innebär bland annat att gårdagens lösningar kan realiseras på en bråkdel av den tidigare ytan. Allt mer blir ytmonterat med mindre och mer komplexa kretsar. Detta är inte alltid till utvecklarnas fördel då montering av prototypkort blir en svår och/eller dyr process.Målet är att ta fram ett inbyggt system med en ARM-processor. Systemet ska innehålla USB-OTG, ethernet, minne av olika slag som FRAM och microSD samt en display med pekskärm för användargränssnitt.

The aim of this study is to examine the possibilities to use gamification to reach thepolitical goals for the transportation system in the Stockholm region. The study has aninterdisciplinary approach and is based around two main building blocks: gamificationand the transportation system in the Stockholm region. The first part examinesgamification. This includes contemporary use, debate, academic definition and aninvestigation of how gamified applications should be developed. One of the mainfindings is a suggestion that gamification should be seen as a process rather that a setof predefined game mechanics that can be applied to any activity.

Denna uppsats har för avsikt att utreda begreppet Just-In-Time (JIT) och dess komponenter för att sedan försöka finna dessa i den svenska lastbilstillverkaren Scanias produktionssystem. Litteratur har bidragit med en definition av JIT som sedan har jämförts med hur Scania arbetar inom produktionen. Empiri har erhållits genom intervjuer med berörd personal samt observationer på plats i Oskarshamn och i Södertälje.För japanerna är inte Just-In-Time-tänket en ny företeelse utan det är något de har arbetat efter en längre tid. Denna uppsats har valt att utgå från Jeffrey K. Likers (2004) definition i The Toyota Way.

Reduced tillage has increased in Sweden during several years, primarily to decrease costs andincrease efficiency in crop production. Despite this, mouldboard ploughing is still the mostcommon primary tillage method on most farms. The aim with this thesis was to compare theuse of pesticides and the occurrence of weeds on ten farms in Skåne and ten farms inMälardalen that use different soil tillage systems. The object of the study was also to clarifywhy the farms had chosen their specific soil tillage system and the consequences it has had onweed occurrence and use of pesticides. The result showed a slightly higher use of pesticideson the farms that use reduced tillage.