Denna uppsats har för avsikt att utreda begreppet Just-In-Time (JIT) och dess komponenter för att sedan försöka finna dessa i den svenska lastbilstillverkaren Scanias produktionssystem. Litteratur har bidragit med en definition av JIT som sedan har jämförts med hur Scania arbetar inom produktionen. Empiri har erhållits genom intervjuer med berörd personal samt observationer på plats i Oskarshamn och i Södertälje.För japanerna är inte Just-In-Time-tänket en ny företeelse utan det är något de har arbetat efter en längre tid. Denna uppsats har valt att utgå från Jeffrey K. Likers (2004) definition i The Toyota Way.

The purpose of this Masters thesis is to compare the scheme structure of two national classifications system, namely the Swedish SAB system and the German ASB. It has been assumed that there are no major differences between the two models of classification systems or the main classes into which documents are placed. The classification theory and subject analysis, which form the basic theory on which my research is based, are taken from Dahlberg, Langridge and Rowley. A comparison of 30 monographs classified in the SAB system Sveriges allmänna biblioteksförening and in the German ASB system Allgemeine Systematik für öffentliche Bibliotheken showed that the classification structure was primarily responsible for determining where a particular document was placed. However, despite the fact that the subject in various documents may be similar, my research will demonstrate that the structure of the two codes also depends on different interpretations of the main subject in a document.

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

Begreppet lean härstammar från Toyota och består av två grundpelare, den ena är TPS som berör logistik, forskning och utveckling ("continuous improvement") och den andra är THS som berör människorna i organisationen ("respect for people"). Båda är lika viktiga för att lean ska fungera och utifrån dessa har diverse verktyg arbetats fram med syfte att göra företaget så effektivt och lönsamt som möjligt. Det handlar om respekt, öppen kommunikation och tillit mellan medarbetarna samt att alla arbetar mot ett gemensamt tydligt mål för verksamheten. Lean är benämningen på en företagsstyrningsmodell som visat sig vara mycket effektiv inom tillverkningsindustrin såväl som inom tjänstesektorn. Toyota har genom detta blivit ett mycket framgångsrikt företag vilket gjort att företag över hela världen försökt kopiera deras arbetssätt.Fabrik X är en produktionsfabrik inom företaget Sandvik och de problem och förslag på förbättringar som uppstår inom produktionen sätts in i en aktivitetslista och prioriteras.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.

The purpose of this essay was to compare the Swedish and the Japanese pension system and see if there were any big differences or similarities. I was looking for answers to such questions as if the systems were modelled with the problematic demographic situation in mind and also how these two countries had tried to manage the problems. Path dependency was also a central conception when I studied the reforms of the two pension systems. I mainly used literature and Internet sources in my study. There were many books on the Swedish pension system and the debates that had been going on since the 80's.

The aim of the thesis was to investigate energy consumption and carbon dioxide emissions from an advertisement broadcasted on the radio or the television or distributed through press. The object was to calculate the amount of carbon dioxide emissions per individual receiver of an advertisement in Sweden. There was no room for a deeper investigation into editorial work within the framework of the thesis. Consequently, main focus of the radio and television study was on broadcasting itself and the components involved. Focus for the press study was on paper production, printing and distribution. Production and discarding of media equipment was not taken into account.

Purpose ? The purpose of this study is to develop a work method to be used by manufacturing companies that are interested in updating which items that should be presented in the materials exposure. To fulfill the purpose an investigation has been conducted to decide which aspects are important to consider and how the aspects can be used to determine which items that should be presented in the materials exposure. Methodology ? To fulfill the purpose of the study, the method has been based on an abductive approach where theory has been layered with empiricism. The main method within this study has been a case study at Volvo Powertrain AB in Skövde with a materials exposure as the analytical unit.

Farmers? main reason for crossbreeding dairy cows is that they have seen a decline in functional traits, especially in the Holstein breed. Throughout crossbreeding, the farmers can combine functional and production traits of different dairy breeds and utilize the heterosis effects which emerge when two or more breeds are crossed. Results from different studies with Holstein crossed with Jersey, Brown Swiss, Normande and Scandinavian Red have shown that the crosses had higher fertility, longer productive life, had fewer stillborn calves and had easier calvings than purebred Holstein. The Holstein crosses have shown very good results and sometimes even better than the purebred Holstein for fat production, which gave higher amount of energy corrected milk (ECM) and higher income for the farmers.

We have left the industrial society, and instead, we live in a post-industrial knowledge and information society. It is often said that industrial production has disappeared or that it has changed greatly. This means that fewer are employed in the manufacturing sector while the service sector is increasing, resulting in that the boundaries between production and administration decreases. The production goes from mass production to more flexible and specialized solutions. This puts greater demands on the logistics chain that continually need to work to meet customer requirements.

Organizational change is hard to achieve, but if an organization doesn't change it might risk its own existence. Effective resource allocation and increased control of the internal production are examples of how organizations try to increase its competitive advantage. An ERP system (Enterprise Resource Planning) can help an organization to achieve this by providing management with direct access to a wealth of real-time operating information, streamlined dataflow, and making the company's business processes more effective. Like other IT-related projects, ERP investments are associated with large risks. Many projects failure during the implementation in one way or another.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.