To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

Den svenska rennäringens primära inkomstkälla är försäljning av renkött. Syftet med denna uppsats är att undersöka ett antal faktorers inverkan på utbudet av renkött. Metoden ordinary least square har använts för att göra en ekonometrisk studie baserad på statistik för åren 1980-2003. De faktorer som testats är total ersättning, vilken inkluderar avräkningspris samt kvantitetsbaserad subvention, och renstammens storlek. Resultaten i vår undersökning visar att total ersättning inte är signifikant på någon testad nivå, däremot fann vi att renstammens storlek hade positiv korrelation med utbudet på renkött.

This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

Systemutveckling har på senare år rört sig mot allt mer flexibla metoder för att bedriva utveckling, ett agilt förhållningssätt vid systemutveckling i dagens IT-bolag är inte alls ovanligt. I takt med förändring av tillvägagångssättet har även ett moment inom testningen fått allt mer fokus: Testautomatisering. Vissa författare hävdar till och med att det inte går att bedriva agil systemutveckling utan att införa testautomatisering. Syftet med uppsatsen är därför att undersöka vilka utmaningar en testare inom de agila metoderna stöter på vid testautomatisering. Detta utförs med hjälp av intervjuer på fem olika företag av fem olika testare där de alla har en gemensam nämnare, att de jobbar agilt..

The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

This degree project handles acoustic measurements of the heat pump EcoAir 107, made by Enertech CTC AB. The sound from the three sound sources of the heat pump, fan, compressor and four way valve, have been measured to find out how they affect the total sound level of the product.Measures to attenuate the sound level have been developed and tested. By comparing these with the sound of the heat pump, in its original state, we have found out the measures which have best effects.The best attenuating measures came to be: taped openings and holes around the compressor space, isolating the top and the bottom of the whole construction, support of the fan bottom part and shielding of the sound source with a screen at a distance of 110 mmThese measures have been tested together and an average attenuation of the total sound level with 3,9 dB have been accomplished. In the front of the fan where the continuous sound is the strongest, the attenuation was 4,7 dB.This project is meant to be used as a guide by Enertech CTC AB:s during their future developing process..

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

At Rottneros pulp mill mechanical pulp is bleached with hydrogen peroxide. The changes of bleaching chemicals that are used for different grades are taken from bleaching tables; however these tables are old and need to be updated. The purpose of this thesis was to be the basis of new documentation.In this thesis three pulps where studied with the aim to find the optimal bleaching chemical changes (total NaOH/VP-quote) for each pulp. The pulps were taken from the filter before the bleaching tower and the pulps were bleached in the lab. The most important pulp property in this study was the brightness and how that was influenced by the chemical dosages.

The aim of this study is to examine the investment decision process for investments that arise due to strategic changes and are of strategic importance to the company. At the foundation of this study is the previous research in this area, done by King (1975) and Bower (1970), which examines the investment process on a more generic level. At the core is the investment decision process pertaining to Projekt X, an investment performed by NordiCorp. Having conducted a case study including six interviews with employees from various parts of the organization, combined with a large number of internal documents, the process regarding the investment decision was carefully illuminated. The results show that in many regards, this process follows the more generic investment process.

The first commercially produced wind turbines in Sweden are starting to reach theend of their lifetime after approximately 25 years of producing energy. The cost fordismantling the turbines, according to Ardefors et al. (2009), is calculated to be 1-2 %of the total investment of the wind turbines. The purpose of this master thesis is tomap the dismantling process of wind turbines in Sweden and try to find a sustainablesolution for the future.To make sure that a correct dismantling process takes place, and that the financialaspect is covered, a proposal for a financial guarantee is worked upon. A nationalunanimity will be created through a financial guarantee and the risk will be minimalof a third party getting afflicted.Studies of literature and interviews have been carried out.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.