Den svenska rennäringens primära inkomstkälla är försäljning av renkött. Syftet med denna uppsats är att undersöka ett antal faktorers inverkan på utbudet av renkött. Metoden ordinary least square har använts för att göra en ekonometrisk studie baserad på statistik för åren 1980-2003. De faktorer som testats är total ersättning, vilken inkluderar avräkningspris samt kvantitetsbaserad subvention, och renstammens storlek. Resultaten i vår undersökning visar att total ersättning inte är signifikant på någon testad nivå, däremot fann vi att renstammens storlek hade positiv korrelation med utbudet på renkött.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Title: Creating high awareness ? A study in how a company can create awareness with cost efficient marketing methods. (Skapande av hög medvetenhet ? En studie i hur ett företag kan skapa medvetenhet med kostnadseffektiva marknadsförings metoder).Authors: Alexander Edlund and Fredrik HanssonAim: Our aim is to reveal the pros and cons of cost efficient marketing and decide which cost efficient method works best in creating awareness. We also want to determine if the methods can be integrated in a successful way to achieve greater awareness.Method/Material: We have made a qualitative approach by conducting three in depth interviews with the company Bluetooth SIG?s marketing director Anders Edlund.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.

This master thesis was performed as a mission from Holmen Skog with the purpose to investigate to which extent their own machine teams and engaged contractors were exposed to theft and vandalism, and most common preventive measures used. With the help of collected data the study should lead to proposals of preventive measures that can help the machine teams in their struggle to minimise theft and vandalism. Theft and vandalism are a big problem for Swedish forest contractors. In a scarce economic situation thefts and vandalism rapidly decrease the profit for the contractors. However, the last years have resulted in a positive awareness of thefts, and more and better preventive measures have been developed. With the initiative of this master thesis, Holmen Skog show that they are aware of the situation and that they wish to take control of the problem. A total amount of 108 questionnaires was sent out to Holmen?s own machine teams and engaged contractors.

Länsförsäkringar in Värmland, Sweden, had during the year 2003 a total level of 6.1 percent of people on the sick-list, which was higher than average in the business (4,5%) and for salaried employees in the private sector (3,3%). The average age of those put on sick-list was 47 years, whish is four years higher than the average for the whole LF-group. The cost for the total amount of people being on sick-list at LF-company (6,1%) was estimated to 1 500 kkr, according to a calculation model coming from Försäkringskassan. For every percent the sick level could be reduced, the company would save 239 kkr. To map out the state of health of each and every collaborator in LF, the company offered all employees to make a health profile at the company's health service, Clarahälsan AB.

The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the Total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the Total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In a time of economic turmoil and financial crisis profitability matters rise higher and higher on company agendas. Many companies are pressured to find profitability to avoid layoffs or even bankruptcy. Profitability essentially depends on the margin on the product or service sold and the costs associated with selling these products or services and hence these areas are of vital importance if companies are to improve profitability. Previous research has focused, for the most part, on product profitability while customer profitability has received less attention. This study is based on a case study of a Swedish publishing house and aims to investigate how the company?s Cost-to-Serve varies between its distribution channels.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the Total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the Total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.