Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

I min uppsatts kommer jag att utgå från en berättelse som beskriver ett fall av orosanmälan som jag upplevde i mitt arbete på förskolan. Anmälan grundades på barnets berättelse och resulterade i ett samtal på ett kriscentrum i närvaro av polis, psykolog och åklagare, utan föräldrars vetskap.Jag valde essäform för min uppsats därför att den skrivformen bjuder på ett reflekterande tillvägagångssätt och lämpar sig för mitt känsliga ämne. Genom att gestalta anmälningspliktens skuggsidor vill jag försöka bringa förståelse för den väldigt känslosamma företeelsen.Jag kommer att belysa vad anmälningsplikten går ut på samt undersöka vilka är mina skyldigheter som pedagog vid anmälningar. Jag kommer att reflektera kring barnets utsatta position, föräldrars samt de anmälande pedagogernas svåra läge.Min uppsats genomsyras av tanken att anmälningsplikten kan te sig som en hård lag men ändå en lag som skall följas utan förbehåll. Pedagogens eget omdöme bör inte förekomma vid orosanmälan.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

I dagens samhälle spelar informationssystem en viktig roll i de flesta företag och organisationer. Informationssystemets uppgift är att tillgodose och hjälpa användarna med information och informationshantering samt att leda till en effektivisering.Arbetet med att utveckla databaserade informationssystem är problematiskt och systemutvecklingsprojekt överstiger ofta budget både vad gäller tid och pengar. Återkommande problem är att systemen inte gör vad användaren vill samt att systemen inte utnyttjas till full kapacitet. Svårigheten med kravhanteringen är något som anses vara en orsak till misslyckandena.Den viktigaste informationskällan för systemutvecklarna då det gäller att ta reda på systemkraven är användarna. Då användarna spelar en viktig roll i kravhanteringen, vilken i sin tur spelar en viktig roll i systemutvecklingsprocessen, är detta ett intressant problemområde.Denna rapports fokus ligger på hur användarna ser på kravhanteringsprocessen.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

An ageing population calls for enlarged needs of care and treatments that is followed by an increased demand on social and medical care. Present organization and structure are not adjusted to these new requirements. Due to this fact, necessary alterations ought to be made between and within the different institutional and non-institutional care actors. This work should be settled locally. In this study, the aim was to describe "Chealth care nearby" as being a new standard of care as well as investigate its significance in the co-operation and collaboration between different care actors.

Many companies sometimes affects that a competitive company pulls use for their trademark or their products in his advertising. It can for instance be that the company uses alike symbols or features and on so ways fields a free ride on another companies good reputation. This procedure is called reputation parasitism and settles in the marketing act, 8 a § comparative advertising. You can also condemn after the marketing acts 4 § general requirement which?s says, ?marketing must be compatible with good marketing practice? which also agrees with international chamber of commerce.

In an environment, demanding both innovation and flexibility, higher requirements of competitiveness and productivity is a necessity. Changed conditions of today's working situations have resulted in an actualization of new ways and methods of working. This has contributed to a development of participating working processes in form of groups and teams. The purpose of these communal working processes is that they ought to result in an increased knowledge and understanding among the group members which in turns will generate positive results in the daily work. This drives the search for new knowledge and development possibilities to handle these changed working processes.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The aim of this thesis is to illustrate the content of the democratic values tolerance, personal development and political equality, in relation to the Swedish school?s systems fundamental values, and from there problematize the schools approach towards the Sweden Democrats. By using a qualitative text analysis upon the party program of Sweden Democrats, we have been able to fulfill the aim of the thesis. We have motivated and defined our chosen democracy values from the schools fundamental values and from democracy theory. With the use of an analyze schedule we have been able to go through with the interpretation and analyze of the party program of the Sweden Democrats.