This thesis discusses the validity of the Capital Protection Rules under the new Companies Act.The areas of particular interest and cause for debate focus on the advantages and disadvantages for creditors under the laws regarding minimum capital requirements, capital distributions, stock acquisitions, stock minimization, loan restrictions and forced liquidation.How could creditors receive better protection?What changes would have to be made to the Capital Protection Rules to provide better protection and what would be the consequences of these changes to the shareholders, the government and the creditors.Could or should we model the Norwegian or American Judicial system in this situation?Included is an in depth report on the Swedish Capital Protection Rules outlining what they are, what they entail and what the reasoning was behind them. Also included are the EU equivalents and Norwegian and American Capital Protection Rules..

This diploma work handles how some parishes of the Swedish Church administrate their building properties.The report also includes how some external property managers in Sweden work with maintenance plans and other maintenance issues. Further, a number of deficiencies have been identified and suggestions to workarounds are treated. The conclusions drawn in this thesis are based on the author´s experience in the field, performed interviews, and literature studies. The result of the work shows a general lack of knowledge in many parishes what concerns regulatory requirements, properties with no maintenance plan and substandard supervision resulting in unnecessary and expensive repairs. Based on these results, different plans for the maintenance of the building properties of the Swedish Church has been proposed..

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

This master thesis has three purposes. The first purpose is to give a theoretical background of how to divide up forest estates and to study how the legal system for these matters works. A literature study has been carried out to give the background and a theoretical model has been made for analysing the law cases. The first purpose also partly touched the decision process in dividing up forest estates from point of view of the law of land parcelling (FBL), point of view. The second purpose is to examine effects of a change of production requirements in 3 cap.7 § FBL as regards dividing up forest estates of private forest owners.

ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

This thesis was performed at SverigeGrepen AB. SverigeGrepen is a company that hasone product on the market; a manure fork that is designed to be used for mucking inshavings or peat. The aim of this thesis was to develop a new manure fork that isadapted to be used in straw.The development started with a pilot study where experience of mucking wascollected to be able to understand what and why certain characteristics are importantfor the function and use of the manure fork.A basic concept was developed where the main function was fulfilled, which meantthat a separation between dung and straw could be performed in a way that wasbeneficial for the user.The work resulted in four concepts of how a manure fork could be used in the strawthat can be designed and constructed. The conclusion that the work gave was that allconcepts met the main requirements required by a manure fork to use in straw.However, concept four provides a good visual impression, while its benefits areassumed to be important qualities..

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

The main objective with this study was to investigate so called odd purposes acceptable when registrating property along with how social development affects these purposes, furthermore to investigate how the cadastral surveyors estimates a foreseeable time. Tradition and praxis is used for several obvious purposes such as housing, farming, forests, offices and industry. Praxis is yet to be defined regarding more unique purposes. There is no mention in the law about which purposes are found acceptable to assure the demands on suitability are met. Cadastral authorities are responsible for making sure the division into property units is uniform and rule of law-accordingly.

Purpose: The purpose of this study is to seek understanding, describe and analyse how auditors practically reassure and maintain their independence towards clients.Methodology: The study is conducted with a qualitative method with a deductive approach. The study is based on interviews with both experienced and recently graduated auditors.Conclusion: Our empirical results show that there are economical incentives that contradict the requirements to fulfil the auditor?s independence. The conclusion is that the media view is narrow and biased. Furthermore the auditors agree that an acceptable level of comfort is achieved by offering a high value, being a part of a large network of professionals and the ability to set materiality and evaluate risks. .

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.