With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Agencies towards Sustainable Development ? A Study of Environmental Management Systems in Governmental Agencies 2005A vision of the Swedish government is to build an ecologically sustainable society. A tool in this effort is to implement environmental management systems (EMS). The aim of the thesis is to present in which phase of the implementation of EMS Swedish governmental agencies are. This will be done by compilation and evaluation of agencies? yearly environmental reports.The thesis is written in co-operation with the Swedish Environmental Protection Agency (Swedish EPA).

The essay on ?The revival of the countryside ? a multitalent in landproduction.? focuses on local and regional development within agriculture, foodprocessing and tourism.Due to great changes in society, the inhabitants in rural areas are forced to find alternative occupations. Using history as a tool to build up the future is a main factor in rural development. Apart from this it involves cooperation, resources, cultural heritage and values, entrepreneurship and innovation, economic vitality, and an understanding of markets and marketing. They all contribute to a region`s ability to benefit from rural development..

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Typically, when Faurecia in Torsås are planning a new assembly line, one of the steps is to build a full-scale model of the line in card board, a form of mock-up planning. Faurecia has shown interest in finding an alternative methodology. The purpose was to explore the possibility of replacing today's cardboard based mock-up planning with models in a digital simulation environment.The purpose of the thesis has been to answer some of these complex questions; What are the benefits of using a simulation tool? In what way can we use it? If we choose to use a simulation tool, in what way does it affect our way of planning an assembly line? What are the advantages and disadvantages? Are there any economical and social aspects?Our results made us realize that a digital simulation tool does not replace the card board. On the other hand simulation could be used as a complement.

In today?s constantly changing market place most organizations need to reorganize. Reorganization carries risks that could jeopardize the organization's well-being and profitability. To minimize these risks, companies need a tool to help them analyze how the reorganization will affect the business before they make major changes. Such tool has now been developed by researchers at KTH.

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..

ISO14001:2004 : A Human Ecological Tool?This is a study by means of litterature analysis and personal experience to find out wheather you could call ISO14001:2004 a Human Ecological tool. The ISO14001 is an environmental management system. I'm approaching the issue from a users' perspective and putting my experience of implementing the ISO 9001 at my work to good use. Though my personal experience is limited to the implementation of the ISO 9001, it is quite relevant to the task since the update of 2004 the ISO14001:2004 is brought closer to the ISO 9001 standard in many ways.

The main focus of this study is to describe how, and for what reasons teachers use literature and fiction as a pedagogic tool. A qualitative study was made by interviewing four teachers about their language teaching. Working with fiction as a teaching-aid in school can in many ways be favorable to both teachers and pupils. In terms of children?s language development, research shows that using fiction as an educational tool can stimulate pupils? well-being as well as their linguistic improvement.

The aim of this study was to find out how journalism students at two universities in Sweden, Gothenburg University and Linnaeus University in Kalmar, use the social networking service Twitter. We were primarily interested in whether the students are using Twitter as a journalistic tool, which includes gathering, production and distribution of material. The study focused on journalism students because they soon will enter the working life and therefore can provide an indication of whether Twitter is a part of the future of journalism. We have used theories of mass communication to describe the development in the area and explore how journalism has adapted to this change. The study was conducted in the form of a survey in which the students answered questions about how they use Twitter and what they think about the social networking service.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

During the last decades the importance of IT has increased for businesses all over the world. It has transferred from only being used in administrative purposes to become more integrated to the core business. Due to the financial crisis in 2009 and increasing globalization, IT is facing the challenge of lower costs and increased efficiency. This requires IT-departments to embrace new strategies in order to fulfill these new tougher demands.Lean is a business development concept that aims to lower costs through more effective processes by removing all activities that does not create any value from the end customer?s perspective.

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.