Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The aim of this paper has been to examine to what extent it has been possible for Patricia Crampton, translator of Ronia, the Robber?s Daughter, to capture and cling to the very personal style in which Astrid Lindgren writes. I also wanted to find out if any adaptations of the text were made and, if any, how they have affected the tone of the book. To fulfil this purpose a thorough comparison of the original text and the translation has been made. The first chapter consists of an introduction presenting the background to my choice of topic and giving a short presentation of Astrid Lindgren and her career as an author.

Optimering är ett ständigt problem att brottas med som inom spelbranschen. Endatorgrafiker som arbetar med spel ska inte bara skapa så estetiskt tilltalandemodeller som möjligt utan måste även få dessa att fungera tillsammans med detekniska krav som ställs utav industrins spelmotorer och hårdvara.Tesselering och displacement mapping är ett exempel på industrins olikatekniker för att ge spel en mer realistisk rendering genom att förbättra siluetter,ge mer korrekta detaljer och samtidigt avbelasta tunga beräkningar från CPU tillGPU genom att utföra geometrins polygonhantering på grafikkortet.Tesselering och Displacement Mapping har börjat öppna upp nya möjligheterför hur moderna spel kan se ut och som datorgrafiker så måste du kunnaidentifiera när, var och hur dessa tekniker bör användas.Detta examensarbete går igenom modellering, bakning och användning avdisplacement mapping på tesselerade geometrier inom en rad av grafiskaanvändningsområden med hjälp av ett par enkla tester i hopp om att göra digsom läsare redo för att skapa realistiska modeller..

A challenge faced by marketers is to make their products stand out in today's cluttered marketplace. Recently, a new approach to attract attention has been observed - brands communicating their products by making fun of other brands. This way of parodying a competitor, or even an unrelated brand, is a risky but potentially effective way to increase attention. Brand parodies walk a fine line between being humorous and clever, or coming off as offensive. Furthermore, parodying another trademark poses legal considerations.

The purpose of the studyfocuses onhow teachersatan uppersecondary school, studentsin the autismspectrum,describetheir experiencesof working withmappingtools, Nylander(2012).Inmy research questionsIstarted fromthe teachers? descriptions of their experiences of mapping procedures, if the outcome ofthe mapping hasinfluenced theteachers'educational work and ifmappingcould contribute tothe visibilityandclarification of the student´s functioning in aschool context.As the study is based on five interviews in which teachers reflect on their experiences from the tool of mapping, the socio-cultural perspective where learning takes place through interaction with the environment became a framework to build from. The method has been interviews based on a qualitative research interview. By using interviews, I was able to capture the diversity of the interviewees? experiences described from the basis of an interview guide.

Scania intends to introduce a new maintenance program for their rolling fleet. Withthis new program Scania hopes to increase their competiveness and add furthercustomer value. This thesis report is a mapping of the current maintenance program,along with its problematic features. Furthermore the report intends to describe thenew program, Condition Based Maintenance (CBM) and the problems that Scaniamust deal with before they can implement it.The report compiles basic information on how a mapping should be performed.Further on it will describe some of the theories of LEAN and leadership. Which aretwo of the most important features in this thesis work.The work has been performed through visits in different workshops, whereinterviews have taken place.

This pilot study describes a therapy method for persons withBroca´s aphasia. This method is based on the mapping hypothesis (Schwartz,Saffran & Marin 1980). The mapping hypothesis is based on the assumptionthat agrammatism is caused by an inability to combine syntactic structurewith thematic roles. This study describes a combination of the therapymethod mentioned above and the Everyday life activities photo series (ELA,Stark 1992). The aim of the study was to investigate if therapy based on awritten sentence/picture format is a viable starting-point for future research.The therapy presented combined written sentences with pictures describingeveryday life activities.

Skuggor är centrala för hur människan uppfattar världen. Inom datorspel och andra interaktiva 3D-applikationer är det viktigt att underlätta förståelsen av scenen och det finns även ofta en stark vilja att skapa realistiska miljöer. Detta samt att skuggsättning är en komplicerad och prestandakrävande operation gör det till ett viktigt område inom realtidsgrafik. Vi undersöker i denna avhandling relationen mellan prestandan (renderingstiden) för de två populära metoderna för skuggsättning inom realtidsgrafik, shadow mapping och shadow volumes. Undersökningen avgränsas till två utvalda varianter av de ursprungliga algoritmerna.

Skuggor är centrala för hur människan uppfattar världen. Inom datorspel och andra interaktiva 3D-applikationer är det viktigt att underlätta förståelsen av scenen och det finns även ofta en stark vilja att skapa realistiska miljöer. Detta samt att skuggsättning är en komplicerad och prestandakrävande operation gör det till ett viktigt område inom realtidsgrafik. Vi undersöker i denna avhandling relationen mellan prestandan (renderingstiden) för de två populära metoderna för skuggsättning inom realtidsgrafik, shadow mapping och shadow volumes. Undersökningen avgränsas till två utvalda varianter av de ursprungliga algoritmerna.

I mitt examensarbete har jag undersökt om det lämpar sig att använda en manuell metod för att skapa normal maps till icke-organiska polygonmodeller avsedda för datorspel. Jag har använt mig av Photoshop för att måla normal maps som jag sedan applicerar på lågdetaljerade modeller jag skapat, för att höja detaljgraden avsevärt. Då icke-organisk modellering inbegriper modeller som ska representera hårda ytor, och därmed inte animeras med deformation, så antog jag att denna metod skulle lämpa sig väldigt väl åt dessa ytor som ofta har extremt mjuka former och precisa vassare kanter. Min metod har varit att studera litteratur om Normal Mapping och hur man använder Photoshop för detta. Jag har sedan utfört praktiskt arbete för att utvärdera hur effektiv metoden är samt vilka fördelar den bidrar med. Jag går igenom teori för normal mapping som jag stödjer med hjälp av faktatexter och instruktions-DVDer i ämnet för att sedan redovisa metoden jag använt i mitt arbete. Jag avslutar sedan med en diskussion kring mitt resultat och redovisar vad jag kommit fram till genom mina experiment. Jag kommer fram till att Normal Mapping med Photoshop är mycket väl lämpat åt hårda ytor och även bidrar med optimeringar i arbetsflödet både vad gäller organisering, tidsåtgång samt kontroll över resultatet.

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This report is a result of a project that been conducted on System Andersson. System Andersson sells and develops MPS-systems for small and medium sized manufacturing companies. System Andersson are today located in the central parts of Jönköping and has about 20 employees. The goal for the project is to develop a new version of Andersson Qwick mps. The project has been divided into a number of smaller projects were the authors been part of the planning module project.