Holmen Skog is one of the largest forestry companies in Scandinavia and they depend heavily on a large network of forest roads for production and logistics in connection to their forestry operations. The company recently introduced a new system for planning of road management. The system will also be developed with the intention to facilitate the monitoring of actions performed by road contractors. This report will provide information to support future decisions regarding further development of the system, after its introduction. In addition to a presentation of results from interviews, the report also provides a smaller study of the different subjects associated with roads, process work and process development. The study is largely based on interviews with road contractors that perform work for Holmen Skog today.

The purpose of the work is to analyze and balance an assembly line at Fläkt Woods in Jönköping. The work is going to answer the questions about today?s throughput time, how much waste that occurs, number of staff at the assembly line, how the supply of material works and possible improvements that can be made at the work stations. The work is also going to give a proposal of improve-ments that can be made.The methods used to get the result include observations and measurements, con-versations with technicians and operators and also data from Fläkt Woods? data-base.Large variations in throughput time are measured during the measure period, from 3 hours up to 5 hours and 35 minutes.

The title of this study came about from the title of Robert Putnams book Bowling Alone, where Putnam mentions that less people are bowling in teams than before. Bowling is still a large leisure activity in the USA but people tend to bowl more and more in small groups and less in organized teams. This study deals with social capital and leisure time. Its aim is to find out if some Swedish people create social capital on their leisure time and also how do they spend their leisure time. Robert Putnams book Bowling Alone serves as main background material along with the work by Bo Rothstein.

BT is a global company within the lift truck industry. The main office is located in Mjölby. In Europe all sales and service activities are carried out by fully owned sales companies. I North America, BT RAYMOND develop and distribute trucks under a different brand. For the rest of the world BT works together with a distributor network, most of them are fully independent others BT has a small ownership in.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

Stress and time pressure is more present in todays labor markets. In financial markets a securities broker is forced to take decisions on investments under high cognitive load and under extreme time pressure. The research of decision under risk gained new ground with the development of the prospect theory and gave us new insights to the decision making of men. Prospect theory has shown that people are risk seekers when dealing with loss decisions and risk avert when dealing with profit decisions. The value function are defined over gains and losses.

2 (45)AbstractAuthors: Gunnel Forssell Ehrlich & Alexandra WinbergTitle: Gender in local press ? a quantitative study of four local newspapers Level: BA Thesis in Media and Communication StudiesLocation: Linnaeus UniversityLanguage: SwedishNumber of pages: 50The report shows a quantitative study of balance in gender and position of power in the local press. The study aimed to shed light on the distribution of space in the newspaper between men and women, those within power and those without in Swedish local press. The study was conducted with four newspapers, during a month of time with local editorial news material. In our study, we have assumed Lippmann?s and Strömbäck?s theories of pseudo-reality and distribution of gender and position of power in Sahlstrand and Jarlbro.

This is a report about accessibility. For this project the accessibility of a building in the city of Halmstad was evaluated. It´s a three storey building with five apartments on each floor divided by two stairwells. These five apartments have since been divided into three different types of apartments. Each type of apartment has been assessed separately.

During the last years around 100 000 immigrants have arrived to Sweden, people with different reasons and different goals for settling down in Sweden. The reason for immigrating to Sweden that will be dealt with in this thesis is following immigration, i.e. when someone moves here because they have relatives living in the country.The reason why it is interesting to study following immigration is that it is an affecting factor for how many that will immigrate to Sweden the following years and may then be used to make a forecast, based on how many first time immigrants there are. To be able to investigate the following immigration analyses are made with time series, logistic regression and Poisson regression. An ARIMA-model has been used to estimate the number of following immigrants in the future.The other part of this thesis will inquire the matter how inclined immigrants are to become Swedish citizens, whether they even apply for citizenship and also how long time it takes from the time when they fulfil the conditions for Swedish citizenship until they apply.

In April 2008 an official report, SOU (2008:32), was presented. In that report it was suggestedthat the statutory audit for approximately 96 % of the Swedish companies was to be abolished.The report suggests that the new regulations should apply to all limited companies thatare below two of three limits that have been suggested: a) a balance-sheet total of 41,5 millionSEK; b) a net turnover of 83 million SEK or; c) less than 50 employees. The regulations aresuggested to come into force July 1, 2010. According to the Swedish laws that regulate thelimited companies, Aktiebolagslagen 10:11, should all limited companies regardless of sizehave an chartered accountant or otherwise approved. The purpose of the audit is to create atrust towards the figures that the company shows and also to act as an assurance towards thirdparties (Collis, 2003; Strenger et al, 2008).

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

The purpose of this master thesis is to evaluate how internal vehicle information inScania buses and trucks can be used for evaluation of driver performance regardingfuel economy, vehicle wear, traffic safety, emissions and cargo damage. To someextent it was examined whether this information could be used for training the driverto a better driving style. In addition, a prototype for such a system was developed.By first defining what distinguishes a talented driver and how he/she differs from apoor driver, followed by a study of the internal vehicle communication, a system thatin real-time gathers and interprets vehicle data could be developed.The resulting system can with reasonably high reliability detect a number of trafficevents (such as braking, lane changing or hilltops). At each such event, the driver?sbehaviour can be evaluated.

This report describes the building of a computer model that makes it possible to simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.