The purpose of this thesis is to identify and define Key Perfomance Indicators (KPIs) and value adding services which are used to describe the quality of Forias logistics services from different aspects. The KPIs should be attractive to both Foria and their customers, with the aim to strengthen the interaction between both parties.The basis for this work is a research in which a literature review and a survey of the market for Swedish logistic service providers were carried out. An analysis of the present situation of Foria was carried out, where a number of people in the company were interviewed. These elements were used together with definitions of KPIs to perform the analysis of the work.The result of the work is ten KPIs that have been created and developed for Foria and which are considered to be attractive to both Foria and the selected customers. The KPIs are: · ECO-driving (binary) ? the company has ECO-driving-educated drivers· ECO-driving (comparison figure) ? all drivers individual driving and its resulting exhaust emissions are compared· The environmental impact ? a total of exhaust emissions from all vehicles belonging to a single business, measured in tonne-kilometres· Complete order ? portion of fields with accurate information (in an order), with the possibility of error categorization· Delivery reliability ? time difference between expected and actual delivery, average for all orders· On-time ? the number of days and hours of difference between the expected and the actual time, for all activities of the order· On-time (activity) ? the number of hours and minutes of difference between the expected and the actual time, for each individual activity of the order· Divergence ? a categorization of all causes of divergence and its responsible department· Level of integration ? the level of cooperation between the logistic service provider and the customer· Customer satisfaction ? how well an order will meet the expectations of the customer The KPIs are described in detail with definitions, how they can be used and what is required to implement them in the service process of Foria.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

En viktig del av den svenska välfärden är kommunens äldreomsorg för personer över 65 år, där Socialtjänstlagen ger rättighet till vårdboende och andra servicetjänster när det behövs. Kommunernas kommunaltjänst ska enligt Socialtjänstlagen vara av god kvalitet. Rapportering av avvikande händelser är en av hörnpelarna i arbetet med att förbättra kvalitet och säkerhet i vården. Avvikelserapportering bidrar till att undvika att negativa händelser upprepas, samt att rutiner förbättras för att höja kvalitet. Genom att ta tillvara möjligheterna med avvikelserapporter kan kvaliteten på vårdboenden förbättras och utvecklas.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

This study focuses on trying to understand the attitudes of people born in the 1940?s concerning their view on social media. This 1940?s group has been growing on the social networks such as Facebook, but their usage is not active. Therefore, the purpose of this report is to understand in what way they are affected by the using of these platforms.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Social media, such as Facebook, Instagram and Twitter, have become popular platforms for social communication, and, increasingly, also important channels for business marketing. For a business intending to use social media for marketing, however, developing a strategy and building a trademark can be a challenge. This report describes how a small, newly established business enterprise can develop a digital strategy with clear goals and practical guidelines. The report describes a digital strategy for Gelato Scarfó and shows how this strategy is made concrete through a set of guidelines. The guidelines develop a trademark for identification and loyalty, and give advice on how new materials can be made consistent with the trademark..

Title: A Business Perspective on Reducing the Climate Impact from Tetra Paks Transportations of Goods. Authors: Pär BerglundSebastian Lyngström Supervisors: Lars J Nilsson, Environmental and Energy Systems, Lund UniversityNils Månsson, Department of Business Administration, Lund University Problem Analysis: Increased awareness concerning climate change will put pressure on companies to reduce their climate impact. Problems arise when trying to reduce the impact from transportations due to companies? limited control on forwarding agents and difficulties measuring the emissions. Purpose: From a business perspective, this report will enable a reduction of the climate impact that arises from Tetra Paks transportation of goods.