Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

Questions about discipline have always been current within the Swedish school system, from the sixteenth century until today. The purpose of this study is to compare the discipline in two old-time elementary schools, located on Gotland, with each other.This study will compare an old-time elementary school from the countryside with an old-time elementary school from a town to show the differences in discipline between the coun-tryside and a town. This study will also focus on how questions about discipline changes from 1847 to 1937/1941. In order to do so I have studied the regulations from the two schools and compared them with each other. When I discuss discipline I will use Michel Foucault?s theory concerning the development of power and discipline in modern society.My study shows that it did not differ much in questions of discipline between the two ex-amined old-time elementary schools.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

   To work and live in the same place where ones employer also is the landlord, can create a situation with many special requirements for the individual. Constrains regarding time, space and impact on social life is likely to appear. Based on theory and empirical research about the Boundaryless work and the Psychological contract the purpose of this report is to examine employees who live and work at the same place. This is done by studying the regulation regarding time and space factors and the psychological contracts in expectations and in violation of the psychological contract and the risks associated with this like Locked-in factors. The study includes interviews with managers and employees (n=9).

The horse's motivations to forage and eat are behaviors that horse owners should take into consideration when designing the horse's living environment. In today?s housing of horses, horses are often kept alone in boxes and paddocks and are fed with small amounts of energy-rich roughage. Problems that can arise with a shortened feeding-time and long periods of fasting are behavioral changes like stereotypic behaviors and an increased risk for ulcers. A solution to the short feeding-time is that you are feeding roughage in a small mesh hay net, or a so-called Slow-feed net.

In this study we intend to evaluate the effect of cetirizin, orally administrated to horses with insect dermal hypersensitivity. The study comprised 156 horses from 49 farms, which were located in different parts of Sweden. The horses were matched on the farms and were given cetirizin or placebo in a double blind test. Veterinarians collected a blood sample and examined the horses visually, before and after three weeks of treatment and filled in given forms. The results are based on the veterinarians? subjective evaluation of the clinical appearance of the allergic dermatitis before and after treatment.

It has become increasingly simple for companies to offer its employees shares in the form of incentive or option plans to acquire.  Companies motivate incentive plans with employee buy-outs that it will lead to higher involvement of work. The offers are often associated with disposal restrictions to the employee such as not immediately dispose of shares or that the employees will have to remain of employment within a certain timeframe. The problems with disposal restrictions are that it makes it difficult to determine the point of taxation.When shares deemed acquired at the time of share subscription the benefit will be taxable as income from service and the increase in value income from capital. When shares are deemed to be acquired only after cessation of disposal restrictions this will result in that the benefit is taxed only once.After the Supreme Administrative Court rulings in 3167-09 and 3168-09, it is now obvious that the acquisition is deemed to occur at the time of acquisition. The problem is not yet solved because the constant development of the security market needs to be considered.

Background: Operating on the stock market is associated with risks. If a particular asset is not traded with the same frequency as the average market asset, this particular asset is exposed to a liquidity risk. It means that the investor might not be able to sell the asset at a desired time without incurring expensive transaction costs. The query is whether or not the investor is compensated with a liquidity premium for bearing the extra risk. Earlier studies on the Stockholm Stock Exchange have failed to prove that there is a relation between stock return and liquidity.

Many dairy farms doesn?t keep their bull calves and cross cow calves, they sell them to breeders instead of raising them their self. It should be possible for the dairy farmers to do it them self?s. There is also a possibility to bread one calf from the cross heifers. The purpose of the investigation was to see if there is any economic possibility to breed beef cattle. I have used the same sample farm trough the hole study, because it would be easier to fallow the study.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

The use of spread spectrum signals has increased dramatically in military applications. Finding methods for detecting and positioning of these signals have become interesting research areas for signal intelligence purposes. One method is to measure the time difference of arrival (TDOA) that occurs when two receivers are synchronous and spatially separated. Based on the TDOA-technique an audio-demonstrator has been developed and implemented. This report describes the theory for how sound received in microphones can be used to extract information about the transmitter?s position from the measured time difference.

In today's society there is tougher climate both financially and time wise. Accountants working under tight deadlines leading to the compromise between quality and quantity in the audit process and them therefor are being guilty of so-called reduced audit quality, RAQ. Reduced audit quality involves intentional actions designed to somehow reduce the evidence contained in the audit. We examine in this study the impact of time budget pressure (TBP), underreporting of time (URT), ethical organizational culture and charismatic leadership has on the frequency of RAQ.Previous research has already shown that there are clear links between TBP and RAQ, between URT and RAQ and between ethical culture in organizations and audit quality available. Five hypotheses were designed to the study.

The aim of this study was to examine how some Swedish school counsellor?s describe their school social work and how they look at its content. Further more the aim is to look at what restraining and promoting factors the school counsellor?s experience in their working situation. The approach of the study is qualitative and interviews have been made with five school counsellors.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.