The movie industry in Sweden is seen as a tight holding cluster where the different entities are being highly dependent on each other. There are also many different barriers to get a movie fully financed, and with the people in charged using arguments such as ?quality?, which is not objective but in fact subjective. The aim of this essay is to investigate how the leadership of five female film producers is being constituted in the film industry, an industry which is both close to the pool art and the pool commerce at the same time at it is male dominant. We have found that female film producers tend to use the strategy to adapt to the surroundings ?shouts? and ?demands?, at the same time as they adapt to their environment by becoming/not becoming entrepreneurs..

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

In this study I have compared two systems of handling TMR, self-propelled/ self loading mixers and conventional towed mixers, what has been investigated is the time for filling, mixing and feeding TMR as well as maintenance and fuel consumption. The background of this study is the structural rationalization within the Swedish milk production that has put focus on efficiency and reducing of costs. Forage and labour are the two biggest costs in milk production today. The study has been performed by visiting three farms and with a stopwatch measured the times for filling, mixing and feeding TMR. At the time for the visits, the users have been interviewed regarding maintenance and fuel consumption. They have also had an opportunity to give comments of how they experience the mixers. The result of the study after processing is that the average stock in the study can save 74000 SEK a year by reducing time for filling, mixing and feeding TMR to cows with a self propelled/ self loading mixer . The conclusion I can make of this study is that it?s not the size of the stock that decides whether it?s interesting to invest in a self propelled/ self loading mixer, but the presumptions on the farms, for instance forage logistics and mechanical equipment..

With the advance in computer and network technologies, multimedia systems and Internet applications are becoming more popular. As broadband network is prevailing, more clients are able to watch streaming videos or to play multimedia data over the Internet in real-time. Consequently, there is an increasing demand in the Internet for streaming video systems. As the run-time environment of such applications tends to be dynamic, it is imperative to handle transient overloads effectively. The goal of this work is to develop an algorithm that would provide a robust and controlled behavior of the video system so that important data is delivered on time to the video clients.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

The overall aim was to examine how the public interest to protect children from violence and sexual abuse at home, is realized by social workers. The study´s central focus was the risk assessments as Social services are obliged to do when they receive a report containing concern that children are being exposed to violence or sexual abuse at home. The study addresses the following questions:o How do social workers go about practically, and what support and knowledge is being used to determine whether the Social services need to intervene for the protection of a child?o What risk and protective factors are taken into account by social workers in the assessment process?o What contextual factors do social workers experience are affecting them in the assessment process?o Which support does the documentation system BBIC provide in the assessment process?The study material was collected through qualitative group interviews, with a modified vignette methodology as tools. The study included a total of twelve social workers, with varying numbers in each interview group.

In the haulage business customers are constantly requesting new features. Hence thedevelopment department must constantly update their system which ultimatelyresults in a variety of versions of the system. The large number of versions creates acomplexity which often reduces product quality and extends the developmentlifecycle time.The work on the following thesis has taken place at Scania?s Fleet Managementdepartment, which develops tools for hauliers to track their vehicle fleet in real time.The purpose of this thesis was to examine how Scania can handle an increasedamount of versions of the Fleet Management System which Scania expect will be seenin the future. The investigation was conducted by preparing a number of differentscenarios that formed the basis for a discussion of what these different scenarioswould mean for different parts of Scania?s business.

In this report I summarize the thesis, which is about to check what will happen if you decide to increase the interval between the a-checks, carried out on the Norwegian airline Widerøe. They want to know if an increase in time between the checks can give them an opportunity of increasing their aircraft fleet. In the current situation Widerøe has 11  Dash 8 Q400 and can consider a possible increase of 3 planes. This would be done without the need to increase accessibility of the hangars and increase in staff.What determines how often a check is performed is the maintenance tasks which has the shortest maintenance interval. On the Dash 8 the shortest interval is 600 flight hours.

We have produced a process mapping and from there developed a document management plan for the research service at the Labour Movement Archives and Library (ARAB) in Stockholm, Sweden. The project was conducted during five weeks in the spring of 2011 at ARAB and the resulting classification structure and document plan has been formulated and presented to the staff at a seminar. We found that the institution in some cases were suffering from an inadequate documentation in a number of the identified processes, and also in their records management and archiving. In this additional memorandum follows an analyzing discussion of activity-based document- and archive management, e-archives and process mapping. We have accordingly tried to standardize the process of research services and contribute to a more adequate document management within the institution.

In this thesis I'm trying to investigate how good educational computer programs work in elementary school. I delimited the study to contain one elementary school in the stages of 6 to 9. The method I used was qualitative and the approach was inductive. I interviewed four teachers and five pupils as the way to collect data for the study. The theories I used were parts from different books with authors, which have done similar studies and researches.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

The aim of this thesis is to study the reading habits of Swedish librarians visualized by librarians from Götabiblioteken ? a collaboration of 14 public libraries in mid-Sweden ? focusing on the reading done on their spare time, even if work-related. We started with a survey sent out to 74 librarians in October 2013, answered by 56, and followed up by interviewing 7 of them in November.We tried to answer these questions:To what extent does the working librarians read on their spare time compared to before they started working?What literature do they read, now compared to before they started working?To what extent does their perception of what they should have read affect their private reading?In what way does a librarian in the beginning of their career differ in reading habits from the reading habits of a librarian with many years in the profession?The result of our study shows that most of the librarians read as much or more than before they started to work. They are more selective in their choice of literature and are affected by their work in it in different ways.

Regardless of what discipline nurses work in, wound care is one of the tasks. Caring for wounds involves early detection of signs of infection, in order to avoid complication. Wound infection extends suffering for the patient and causes unnecessary costs for society. The aim was to describe how nurses can identify infection in wounds. Method: The design of the study was a literature review, where13 scientific articles were examined and analyzed.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

Today therapy dogs (Canis lupus familiaris) service people more than ever and different categories of work places use therapy dogs to help their caretakers. Many studies have been made on the positive effects in patients when they are given contact with a dog, but very little have been done on how the dog experience its situation and what kind of behaviour a therapy dog shows during its working days. This work was made to investigate the behaviours that educated therapy dogs in Sweden showed when they were in contact with a caretaker and to find out if the dogs showed any signs of stress or some other kind of discomfort. To do this a survey was sent out to 17 educated therapy dog handlers in Sweden that together had 18 educated therapy dogs. The survey contained 39 questions about the daily work of the therapy dogs when they were together with caretakers and some questions about the therapy dogs spare time. A question about what kind of dog breed the therapy dog handlers had were also in the survey to investigate if some breeds were more usual as therapy dogs.