Sökresultat:
11040 Uppsatser om Time estimation methods - Sida 47 av 736
Allmänhetens involvering i planeringsprocessen : En studie av två olika metoder för gatuundersökningar
It might seem obvious that public opinions should be included in the planning process. However, it is not clear to what extent. Statutory forms of public participation attract little interest since many people feel that it is hard to make a difference. The purpose of this study was to engage those that normally do not get to speak their mind in the planning process. In this study, two methods for conducting ?on-street surveys? were investigated.
3D Fräs
This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.
Byggnadsminnesmärkning eller varför är det så ont om Q?
This thesis deals with our heritage and the care of old buildings. In order to limit this vast area a specific attention has been brought upon the process of giving buildings a certain level of protection and after decision having it taken away, instead of giving a stronger protection level.Further limitation has been done through the choice of four buildings in Lund, within Lund University campus. These buildings all lost this certain level of protection. The participants in these kinds of cases have a level of power, what argumentation did they use?The methods being used are discourse analysis, phenomenology and the daily methods of the building care field..
Scrummästarens roll som konflikthanterare : Konflikthantering i agila projekt
Companies show interest in agile methods, but this can be challenging since these methods to a certain degree stand against traditional project methods. If the use of agile methods increase it is of importance to clarify what mechanisms that are significant to a successful result. The aim of this study is to clarify the role of the scrum master regarding conflict management in agile groups. The goal of the study is to better prepare the ScrumMaster to be ready to help the group in a conflict situation. In this examination a qualitative method has been used where five scrum masters, active in agile projects, have been interviewed about their role in conflict management.
ROLL UP! Produkten som förenklar hanteringenav en dragfjäder : Ett examensarbete som startade med en enkel idé och utvecklades till en prototyp
This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.
Metoder för att hjälpa? : En kvalitativ studie om arbetssätt och metoder i arbetet med sektmedlemmar och sektavhoppare.
The purpose of the study is to investigate methods and work procedures that aim to motivate people to leave a cult and/or supporting them after a cult exit. The study was limited to investigate how Sweden?s, within the area, three premier voluntary organizations Föreningen Rädda Individen, Rådgivning Om Sekter and Hjälpkällan work with present -, ex ? and relatives to cult members. In addition to the mentioned organizations we have also investigated the work procedures and methods used by Åke Wiman. The study has got a qualitative approach and includes semi-structured interviews.
Kassaflödesanalyser : En undersökning av kassaflödesanalysens användning i förhållande till det tidsperspektiv som styr företagens agerande.
Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.
Vad betyder tecknen i bilden? : Paragrafigurativa element i kinesiskt tuschmåleri. En visuell kultur-undersökning.
Due to lack of knowledge about motivation in Swedish for adult immigrants (SFI ), I have chosen to write about motivation. Motivation is a complex concept to understand. It has different meanings depending on what context the term is put in. In this study , you will read about the external and internal motivation . But also about integrative and instrumental motivation.
Lärcentra och lärmiljöer på folkbibliotek ? en studie av personalens synsätt på motivation och metoder
The aim of this thesis is to investigate what distinguishes the views of staff at centres for learning as regards users? motivation at centres for learning in public libraries. The following questions were asked:? How do staff at centres for learning view the users? motivation to studies?? How do staff at centres for learning view causes for lack of motivation and obstacles for motivation to studies?? What methods do staff at centres for learning use to motivate potential users to studies and to market the learning centres? ? What distinguishes these views of staff on users? motivation at centres for learning in public libraries?The methods used in this study are: literature studies, qualitative interviews and questionnaires. Interviews and questionnaires were done with six employees at six centres for learning.
CarEye ? Sees & Saves: Fordonskamera för skadedokumentering
In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.
Potentiella armeringsfel inom byggproduktionen : En generell studie
Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.
Varför presenterar företag amerikanska tv-serier? : En studie av en marknadsföringsstrategi
Marketing is an important tool for companies to use in today?s consumptions society, to reach out with products and services. The message that has been sent out is also important, because the message can be distort or reach wrong customer group. Above all this the competition and the struggle round the customer?s increases and it has become more common that the customers tend to be less loyal towards the company.
Introduktion av division för alla - en learning study i åk 3
My curiosity concerning what pupils read and write during leisure time led me to gather information using a quantative method. The study's aim is to investigate which reading and writing habits they have during their time outside school. A comparison was done of pupils at school year level 3 and level 4 in two different schools with the intention of investigating the influence of social background on reading and writing habits. 137 pupils filled in survey forms and thereafter the MYSTAT statistic program was used to process the information. The results point towards that the pupils read story books both more often and for a longer time than any other type of literature and that they read them often or very seldom.
Vad innebär planeringstid? : En kvalitativ studie om fyra förskollärares syn på den pedagogiska planeringen i förskolan
The running of a Swedish pre-school is not just about taking care of children but involves incorporating educational activities that follow curriculum guidelines. In addition, time must be allocated for planning, discussion, evaluation and reflection. Many pre-school teachers feel that there is insufficient planning time which is needed to follow the established curriculum guidelines for kindergarten. Due to the rising numbers of children per class, and the obligation to document and evaluate everything, pressure and lack of time has become a significant issue.The purpose of this study is to investigate four pre-school teachers´ views on pedagogical planning and reflection time. Questions to be answered include:1.
Behandlingsmetoder vid hopparknä: en litteraturstudie
Jumper´s knee is a common overuse injury due to repetitive microtrauma to the patellar tendon. It is especially common among athletes who are involved in sporting activities that involve jumping or fast running. The term jumper´s knee was adopted after Blazina published his original paper in 1973. Its pathology can be considered as a partial or total rupture of the patellar tendon in one of its three insertions. The aim of this literature study was to review the methods used to treat this condition and the results obtained focusing on pain relief and returning to previous sport or level of activity.