The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

The pressure is getting tougher on Accident and Emergency departments. Therefore it is crucial to study how the patient?s perceive their visit to the Emergency department. Knowledge about this enables improvement of routines, patient participation and patient safety. The purpose of the study was to investigate patient?s experiences of their visit at the Emergency department.A descriptive design was used.

Title: Process description of round timber transports ? a case study at Tra?frakt Go?taland ABAuthors: Karl ? Johan Tern, Christian Johansson and Andreas IvarssonTutor: Anders JerrelingExaminer: Fredrik KarlssonBackground: Today the profitability of forest haulers is unsatisfactory. Negotiations on prices are more about the relative strength of the negotiation parties rather than a discussion about actual costs. Adding extensive changes in the forest haulers cost structure has led to insufficient knowledge of whether the negotiated prices really correspond to their costs.Methodology: We decided to carry out a case study at Tra?frakt Go?taland AB, a special interest organisation whose members represent the majority of forest haulers in Go?taland.Purpose: To describe the processes and underlying activities of round timber transports.

Feed intake in dairy cows is regulated by a variety of factors influencing hunger and satiety. One of the regulation systems includes the short chain fatty acids produced during feed degradation in the rumen. Starch can be digested either in the rumen where short chain fatty acids are produced or in the small intestine where glucose is the end product. Since glucose does not have the same effect on satiety that short chain fatty acids have, the site of starch digestion might be an important factor that affects feed intake and milk production. The aim of this study was to investigate the effects of site of starch digestion on feeding behaviour (feed intake, consumption time, and eating frequency) and milk production. Because feeding behaviour is closely connected to the cows? environment, the study also included observations of behaviour. Three different feed rations were compared.

For nearly twenty years people have been talking about Product models, but given that the building industry is so conservative, it is hard to implement new working methods. Product models are these days known as Building Information Modeling, BIM. People often say they work with BIM but they often forget the most important part, the information. A 3D model should be linked with characteristics and information. Information that can be invaluable for the facility manager.We have a vision that in the best of worlds the facility manager would be able to "walk" into the model and see what kind of installations are inside the wall or in the roof.

The purpose of this Master?s thesis is to describe and analyse the development of the public and the study circle libraries in the district of Kolbäck during the period of 1913-1954. The factors important for the library development described in sub-questions are: financing, locality, staffing, stock of books, book-lending level and uniting district effects. I use a hermeneutic interpretation model of interaction between the parts and the wholes, between reasons and results. This research leans mainly upon material which is sent to be deposited in archives in Hallstahammar, Västerås and Grängesberg.

The text discusses the folk-tale princess as a good role model for both children and adults, from a feminist debate concerning this issue. Also an iconographic study, it compares women in folk-tale illustrations with women represented in fin-de-Siècle art concentrating on the Great mother goddess and the femme fatale, finding similarities between folk-tale illustrations and other art. Besides that, the text look at the interest for Swedish folk-tales in the 1890´s, the connection between women as illustrators of children?s books and ideas about nature and womanhood that might have had influence on the Swedish artist Elsa Beskow at the time..

Estimation of the variation in the integrated hydraulic conductivity around the Tunåsen infiltration facility - An investigation of the effects of uncertainties in existing informationAlmost half of Sweden?s drinking water volume is produced from groundwater. The main fraction of this is extracted from eskers, some of which allow for very large extraction rates. Despite this, the groundwater volume is not sufficient in some areas. This has led to an extensive use of artificial recharge.In Uppsala, the total volume added through artificial recharge is divided between four infiltration facilities.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

This study examines the equity cost of capital between two periods distinguished by substantial differences in IPO activity. In light of the stemmed IPO flow to the Swedish stock exchange in 2012, this study regards the conjecture that the IPO count is related to the prevailing cost of equity capital for certain periods. By application of the Residual Income Valuation model the cost of equity capital is abstracted from sampled stock prices and compared at two points in time for which extreme highs and lows of IPO activity were observed. Using randomized samples from 1999 and 2012, significant differences between the estimated costs of capital are established. The findings indicate that the equity cost of capital, much as it may help influence, nevertheless plays a subordinated role in the going-public decision..

When establishing a groundwater protection area it is of great interest to be able to estimate the transit time of the groundwater from different places of the aquifer to the withdrawal well. These estimates can be uncertain due to heterogeneities in the aquifer. As a part of the work to develop methods for a more certain delineation of protection areas, a tracer test was performed in an esker located 25 kilometres NW of the town Uppsala.The purpose of this master thesis was to perform, describe and evaluate the tracer test. Travel times from the tracer test should then enable comparison against stochastic simulated travel times of the groundwater in the area.Three dyes (rhodamine WT, uranine and naphtionate) and a salt (NaBr) were used in the tracer test. The tracers were injected in four different wells located 25 meters from a pumping well.

This study was the foundation for an evaluation of an employment project in Sweden. The project offers occupations in carpentry as well as kitchen work for people with psychiatric disorders, substance abuse and other social difficulties. This studies purpose was to analyze the projects significance to its participants and also to distinguish weather the project influences the participant?s life in a professional or private way. The methodological tool was five qualitative interviews with the participants and three qualitative interviews with the employees.

Detta examensarbete är utfört på Saab Training Systems AB i Huskvarna. Saab Training Systems utvecklar, tillverkar och säljer kompletta militära träningssystem.Syftet med arbetet var att minska ledtiderna, då korta leveranstider blir ett allt viktigare konkurrensmedel. Arbetet innebar en kartläggning av nuvarande reserv- och reparationsflöde samt att identifiera problem och komma fram till förbättringsförslag.Vidare har vi studerat reservdelslagrets lagernivå och dess kapitalbindning.Arbetet genomfördes med hjälp av intervjuer med berörd personal, observationer, enkätundersökning samt statistiska studier. Vi har även arbetat med Supply Chain Operations Reference Model som är en öppen referensmodell med vars hjälp man kan kartlägga, förändra och optimera sin verksamhet.Saab Training Systems har som mål att ledtiderna för reservdelsflödet och reparationsflödet skall vara 14 dagar, men i själva verket är det inte så. Dessa ledtider är idag längre, hur långa är dock oklart.De långa ledtiderna beror främst på att i flödena förekommer det mycket passiv tid.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.