Sökresultat:
10873 Uppsatser om Time allocation model - Sida 45 av 725
Resning i skattemål och skattebrottmål - i ljuset av artikel 13 i Europakonventionen
Based on the Migration Board's statistics report, the number of children that has gone missing within a time interval of 4 years (2010-2014) comprises 1331 children in total, of whom 146 are girls and 1185 are boys. A rising interest about what has happened to those children created a fundamental platform for this thesis. By reading Åkerman?s report from 2012, and the book De förlorade barnen: en rapport by Mikkelsen and Wagner (2013) the curiosity grew deeper. The research questions that were established were divided into three parts.
Simulering av hydrauliska dämpare i borrslagverk
This master thesis consists of the creation of shock absorber models for percussive rock drills. A model of the rock was also developed. These models were connected to existing models of the rock drill to create a complete simulation of the rock drilling process.When the models had been created the rock model was evaluated by comparison with measured values from lab tests. The verified rock model was then used to evaluate the shock absorber models.Four new shock absorber concepts have been developed. Three of these have been modelled, while the fourth have only been sketched and described.The evaluation of the models showed the following:? Simulations of the single shock absorber don?t correlate to reality very well.
Identifiering och reducering av köer i samband med återbesök
Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL? How does the decision of sending product LCL or FCL influence the delivery service? How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL? Method ? A total cost model was developed. This model is supported from existing literature.
Politiskt utanförskap : en studie av invandrarsammansättning, kommunorganisation och kommunpolitikers demokratisyn som förklaringsfaktorer av underrepresentation av invandrare.
The development that the Swedish society has experienced during the last four decades and the higher part of the population coming from foreign countries calls for a more intensive research on the situation of these groups. The purpose of this study is to find explanations of the differences in the share of immigrant politicians in Linköping and Norrköping. The starting point of the study is a model of factors assumed to affect the representation of immigrants in the municipality assemblies. The immigrant composition, the municipality organization and the view of democracy of the politicians, are all assumed to affect the civic participation. The civic participation is then assumed to affect the representation of immigrants in the municipality.
Stenmaterial vid asfalttillverkning
Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.
Prognostisering av räntabilitet på eget kapital - Förbättras möjligheten att prognostisera räntabilitet på eget kapital om hänsyn tas till earnings management
Prior studies have shown that earnings management can be used either to inform or to mislead investors about the future performance of a company. However, few studies have examined the impact of earnings management on forecasting return on equity (ROE). The aim of this thesis is to investigate whether the ability to forecast next year's ROE is improved when taking earnings management, measured as discretionary accruals, into account. This is examined by comparing a forecast model that takes the magnitude of discretionary accruals into consideration with a model that does not. The study is based on companies that were listed on the Stockholm Stock Exchange during 2002-2012.
Cykeltidsoptimering av sjuaxligt robotsystem
This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.
Konstruktion av mutterdragare för stora moment
This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.
Manliga förebilder inom socialt arbete : föreställningar, praktik och organisation
Among those who graduate from the various schools of Social work in Sweden are a great majority women. At the same time men are sought after in the work field. But not just to level up the equality between the sexes, but also to fill a gender specific niche to counter up a need for male role models. But a closer look at this need and the types of functions set to cater for it shows that male role models as a concept vary between contexts. In this study we examine the concepts and the practices of male role models in three different settings: a municipal social care center offering young boys male bonding activities; a non-profit organization warding young people from drug abuse and criminal behavior; and last, a long term residential home for young boys between the ages 13 and 19. Our research shows that the concept of the male role model vary between the organizations and less so within.
Fritidspedagogens möte med ett museum : Fritidspedagogens uppdrag och det pedagogiska arbetet under ett studiebesök
Essay means attempt, and is a paper written based on self-experienced dilemmas, which the writer then returns to, reflect upon and discusses on the basis of literature and accepted theories. In this essay, I reflect upon my own professional role as a leisure-time pedagogue. The leisure-time pedagogue must provide activities that in different ways relate to the curriculum 2011. I have therefore a responsibility to influence the students' desire for knowledge. Focus of learning is different from the one in school, with an emphasis on informal learning.The dilemma is that I am unable to do any pedagogical work at the museum because of many conflicts.
Implementering av lean i ett gjuteri med låga volymer och hög variation
Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.
Ena dagen student nästa dag nyutexaminerad sjuksköterska
Background: Every year about 4600 nurses are examined in Sweden. The work as a nurse is responsible and she is often working under time pressure. Aim: To describe nurse?s understandings about her professional role during her first year after the examination. Method: Systematic literature review, where 10 scientific articles were examined.
Frilekens betydelse för barn i förskolan : En kvalitativ studie av några pedagogers syn på den fria lekens betydelse för barns lärande
The aim of this study is to increase knowledge and understanding of free play or free fun time importance for children of age around five years in preschool, in order to promote children?s development and learning. The focus was on exploring and better understanding of teacher?s and educators? approach to the free fun play time as a tool in their educational work, and also about their own role in this context as well as analyzing of forms, rules and structures spontaneously created by groups of children having free play fun time. Another important moment of this study was to give more light on approaches to this issue in education theories by Piaget, Vygotsky and Freud among others.As to the practical experimental part of the study it has been performed at a preschool and kindergarten in a suburb at the outskirts of Stockholm, with four employed educators there and with groups of children of age around five.
Klimatinducerade fenologiförändringar och dess effekter i näringsväven
The climate affects animal populations through several processes. These processes includereproduction, phenology and the success of hunting. By influencing the phenology of species theclimate also affects the way species interact. If a climate-induced phenology change promotes abasal species to bud earlier in the spring for example, this will affect the links to other species inthe food web due to a time lag in the tropic levels above. This dependence, that a predator has tobeing synchronous to its prey, is called the match/mismatch hypothesis (MMH).
Wheat : an analysis of variables determining the Swedish price of wheat
Increasing volatility and less political intervention from the CAP in the market price of wheat is making it more difficult than in the past for Swedish farmers to determine the price at which they should sell their wheat. In the past, the Swedish farmer-owned company Lantmännen has traditionally set a guideline price for Swedish wheat every year to which farmers could adapt, but ceased doing so last year. Therefore this study sought to identify the parameters on which the price of wheat is dependent on by using a reduced form model. The perspective adopted was that of farmers. The model proved able to identify the main factors determining the annual price fluctuations in wheat, with all variables included having an impact on the wheat price, except export quantity in the previous year.