Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for Timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future Timber harvesting.

The construction and use of buildings in the EU accounts for half of the EU?s extracted materials and energy consumptions, and a third of greenhouse gas emissions. In the past decade, the construction sector has responded to such concerns by focusing on post production energy efficiency. However, new findings indicate that upstream construction processes influence emissions significantly ? necessitating a shift in focus to include material choices and building processes.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f Timber was transported on the road. Data about the road was measured with a profilograph car before and after the Timber transport.

The industrialized Timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized Timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "Timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?Timber slump? that was anticipated.

The purpose of this research is to identify how E-NGO and forest stakeholders, in the study referred to as non-state actors, have influenced the EU Timber regulation; through participation and lobbyism towards the decision- makers (policy makers) at EU and national level, to achieve adjustments in the legislative text. The study also examines the relationships between the forest stakeholders, the E-NGOs and the EU-institutions, regarding communication, cooperation, informal and formal consultation where interviews were accomplished with decision-makers from the EU-institutions, forest stakeholders, E-NGOS and representatives from Swedish authorities that participated under the development of the EUTR during the period of 2008-2013. The participation and lobbying from non-state actors have most likely affected the outcome of the regulation, through alterations in the legislative text and through influencing the EU-institutions. Several factors that have affected the efficiency and timing of the influence have been identified through interviews as well as various approaches to influence the decision makers. The findings of the study may be useful for forest related interest groups that are involved in decision-making procedures at EU-level and as substance and material for further research in the subject of forest policy making at supranational level..

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the Timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, Timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term Timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed Timber while still merchantable.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for Timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for Timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for Timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

Earlier investigations showed that damages on Timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on Timber caused by different feeding rolls. In this study the production and Timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

I Sverige fanns, mellan 1874 och 1994, ett förbud mot att bygga bostadshus med fler än två våningar i trästomme. Under denna tid försvann större delen av hantverks- och ingenjörskunnandet och man fick därför börja från början då förbudet hävdes. Byggandet gick till en början trögt, men tog fart i och med regeringens nationella träbyggnadsstrategi och utvecklandet av byggande med massivträ i början av 2000-talet. Limnologen i Växjö är ett bra exempel på hur långt fram Sverige ligger i utvecklingen, men det pekar också på områden inom tekniken som behöver förbättras.Den här uppsatsen behandlar översiktligt hur trähusbyggandet har sett ut i Sverige och beskriver sedan Limnologen med fokus på entreprenadform, stabilisering, brandskydd och akustik. Vidare beskrivs hur massivträtekniken har utvecklats och hur byggsystemet för massivträ har tagits fram..

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.

Huvudmålet med detta examensarbete var att undersöka om det för Södra Timber är ekonomiskt hållbart att tillverka engångspallar till pelletsproduktionens tilltänkta säckningsanläggning i Långasjö, gentemot att köpa in engångspallar från en extern leverantör. Detta gäller då för 30 000 engångspallar om året.Intervjuer togs på Södra Timber i Långasjö om vilket virke som var lämpligt från företagets sida att bli av med. Detta visade sig vara brädor av 19x75 mm och 75x75 mm. Dessutom beslutades i ett tidigt skede att en engångspall med måtten 1200x800 mm är en bra lösning då detta är europastandardens mått. Olika alternativ togs fram för hur man skulle kunna ta fram materialet och sänka produktionskostnaderna och avsåg då brädor 19x75 och klossvirke 75x75.