The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

Projektets mål har varit att finna orsaker till delaminering av lamellimmade komponenter vid Stora Enso komponentfabrik i Ljusne. Detta resulterade i en analys av de faktorer, både material- och tillverkningsmässiga, som kunde bidra till en försämrad limfogskvalité. Analysen baserades på standard SS-EN 13307 ?Timber blanks and semi-finished profiles for non-structural uses?. En av de gällande faktorerna som analyserades var presstrycket vid limning.

skogsföretagens långsiktigt strategiska planering sker idag i de flesta fall med Indelningspaketet (IPAK). För överföringen från strategisk till operativ och objektsorienterad planering finns ingen vedertagen rutin. Syftet med denna studie, som initierats och finansierats av SCA Forest and Timber, har varit att utveckla en rutin för långsiktig operativ planering. Kravet var att planeringsrutinen skulle vara kraftfull nog att implementeras på ett stort skogsinnehav, i detta fall ca 90'000 ha. Planeringsrutinen omfattar åtgärderna slutavverkning och gallring.

Sandvik Group is a global engineering corporation within materials technology and produces, among other things, band sawsteel. In order to develop custom relations, custom benefits and the supply chain Sandvik wants to become more acquainted with its customers. Improved feedback means that Sandvik will be able to develop its products in a customized direction. This thesis is a tool for educating and developing sales staff. As a support a calculation tool that can be used as a sales aid has been developed.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

This thesis aims to find a more cost effective model for purchasing and logistics at asmall company. The studied company is a BMX (bicycle motocross) and MTB(mountain bike) retailer. The questions to be answered are: How large parties shouldbe ordered and what mode of transportation is to be used? A literature orientation ofthe field was followed by visits to the company, obtaining information from twodifferent logistics companies and interviews of four other companies in the sameindustry. The study shows that it´s difficult to develop an optimum order quantity fora small company since there often are other factors affecting how large amountshould be ordered.

The biodiversity of the Swedish forest has degenerated since the beginning of the 19th century when fire suppression and large scale logging first occurred. Together with a changed land use, these actions today have had a negative influence on many forest dwelling species, due to gradual reduction of natural processes, successions and different structures from the forest ecosystem. The Swedish Forest Act, together with different environment certifications, have today encouraged private persons and forest companies, among them Holmen Skog, to work actively to improve nature conservation. The aim of this study was to, by field inventories of already existing nature values, literature studies, recommendations from scientific reports and ecological gap analysis as a basis, make a management plan, for a non-production area, to conserve or improve the prerequisites for biodiversity. ?Storskogsberget? is located in the coastal area of Västerbotten County, 35 km from the city of Umeå.

Syftet med denna studie är att beräkna de ekonomiska konsekvenserna för Iggesunds sågverk att övergå från diameterbaserad sågklassläggning, som används i dagsläget, till flytande sågklassläggning för delar av sågverkets timmerkurva. Huvudfrågeställningen indelades i olika delfrågor som undersökte hur volym- och värdeutbytet, planerbarheten och produktiviteten påverkades. Studien grundar sig på teorier om den ekonomiska konsekvensen av ett beslut där resonemang om alternativkostnaden ingår, volym- och värdeutbyte av råvaran samt teorier om produktion, produktivitet och planerbarhet. Studiens resultat kommer att användas av Iggesunds sågverk i ett fortsatt utredningsarbete om effekterna av flytande sågklassläggning på hela timmerkurvan. Till detta utredningsarbete har en metodik utformats och ett rekommenderat arbetssätt presenteras i kapitel 7.

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.

The forest is characterized by many different values such as those related to forest productivity which are of a big importance for Swedish economy. History has proved that forest resources had helped the country in the transition from the agricultural to the industrial society. Today Swedish forest industry is among the strongest in Europe and significantly contributing to the Swedish export. The industry provides many direct and indirect job opportunities and is one of the biggest employers in the industry sector. It is also worth to notice that the forest can also generate an additional income for the owners, even if the forestry isn?t their primary income source.

In three areas in the province of Småland studies has been done to investigate how big damage the moose may do to P. abies. An inquiry examination and two different types of surveys were done to find out how big area, which volume and which financial consequences the moose debarking has had on the forest. When the volume was calculated the rot spreading was included. The area that was damaged was stipulated with the answers from the inquiry examination. 59 % of the asked forest owners answered the inquiry.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.