The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

This thesis examines and measures differences in effciency between L1- and L2 language use for solving referential problems. Quantitative measures used in the study were time and error frequency. Qualitative measures, such as how the tasks and the participants own performance were experienced, were measured by an post interview and two questionaires. Two different tasks, a sorting task and a construction task, in which each informant was given the role as a constructor or instructor, were used for data gathering. A total of 20 dyads, divided in two language groups (English and Swedish) participated in the study.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

Restrictions in nature conservations are increasing the influence of forest management. Nobel broadleaved forests are more influenced than other forests, because they are considered to be more valuable than other forest types in Skåne. There has been a lack of knowledge about the amount that is set-aside for nature conservation and what types of forest that is concerned. These are the main questions to be answered in this thesis. Moreover has the timber quality been compared between set-aside and non-set-aside areas since it affect the financial conditions for the forestry in nobel broadleved forests. The last asked question deals with the financial consequences of set-aside.

Holmen Skog has in some places in their operation area access to timber trucks with centre mounted scrapers. They make transportation more flexible and reduce reliance on contractors for road maintenance. The trucks with centre mounted scrapers have a higher tare weight, making them less productive and therefore they receive compensation with a 0.75 % increase on transportation price. The purpose of this study was to investigate what actions a timber truck with centre mounted scraper can perform with acceptable quality in winter, and to examine if it is an economically profitable solution for the truck operator and charterer. The study was done in three stages; interviews, performance analysis of the transportations carried out and an economic analysis with the help of Sven Erik Gilles spreadsheet tool. The study included the districts Delsbo and Hudiksvall.

This report will outline a proposal for the improvement of the baggage sorting facility at Arlanda airport. Swedavia is a state owned company group that operates, owns and develops airports in Sweden. One of their main roles is to create accessibility needed to facilitate and streamline the work at the airport.Swedavia is constantly working to develop new solutions and enhancements that will help to standardize and automate the work at airports without major impact on climate and above all adapt these solutions to work.The project has been aimed to identify and isolate the problem at the check-in counter, investigate the possibility of setting a speed control on the DC motor driving the luggage conveyer belt at the check-in desk so that the luggage does not lose tracking already there, as well as evaluate the new sorting systems planned to be introduce in the upcoming refurbishment of the sorting area.To determine the parameters that are used to regulate the speed of the baggage conveyor belt, information about the inputs and outputs that participated in the process was gathered. Information was collected both practically and theoretically. Process was followed and monitored by the supervisor of the company, and a theoretical study was done separately on my own.

To effectively manage a forest resource for both economic and other values good planning is required. The problem is complex since you want to know which forest to cut and when. Often a hierarchical planning structure is applied, including strategic (long-term), tactical, (medium-term) and operational level. Today SCA Forest is one of few forestry companies in the northern Sweden with an integrated forest wood supply and industry. The goals of the company are to supply their own industries with wood and to manage the resources of the forest through a long-term perspective with satisfactory profitability.

This essay aims to investigate a rare method of marking up timber before hewing it. The method for marking up timber is by eyesight, where visual judgment and the use of a broad axe are the tools employed. The broad axe is driven through the bark and exposes the inner bark in a straight line. The method is described by a craftsperson dating back to the 1930s. There is a lack of information regarding the method.

This report has been done in collaboration with SCA Skog, Norrbottens Forest Management Area. The purpose of the survey is to try to find out what the forest owners who either live in Norrbottens Forest Management area or outside but has their forest holdings in the administrative area has the vision of SCA Forest and their forest services offered by the administration. But also to find out the presences of other timber buying players who procures timber in the administrative area. This study seeks to determine if there are deficiencies that may need changes or improvements to the prevailing conditions in Norrbottens management area. The literature study is about how to design a questionnaire based on what you want to know and what to consider in order to eliminate the problem of constructing a questionnaire. A questionnaire was sent to 400 randomly selected forest owners who have their forest holdings within SCA Forest Norrbotten Management Area. And of the 400, it was 181 respondents with 39 women and 138 men.

I have done a follow up study of the restoration of two rivers, Röälven and Grundan, in order to evaluate the effects of the restoration on the endemic population of trout. Both rivers have been used for timber floating during many years throughout the 20th century, and because of this, had all obstacles such as rocks and wood parts removed. In 2004-2005 both rivers were restored, and rocks and wood were put back into the rivers. Spawning grounds were created and boulder dams were constructed to promote the streaming water. The result showed that the trout population of both rivers increased after the restoration, but also that the trout population of Röälven increased more than that of Grundan.

Under the hawks wingsDistribution and sorting at the upptagningshem in Sandsbro between the years 1933-1935This paper aims to study a so called ?upptagningshem? in Sandsbro, Sweden during theperiod 1933 to 1935. All the children during those three years were enrolled in theupptagningshem is included in the study, a total of 101 children. The main sources studied areprimary sources obtained from the county archive in Kronoberg which is shown in aquantitative method with the thesis that the upptagningshem works according to YeheskelHasenfelds ?people-processing technologies?, which acts as a sorting device which meanscategorizing and classifying activities where different kinds of people are sorted and based onthe results taken care of, by appropriate other organization that can provide the rightresources.

The aim of this study is to get a deeper understanding about user tests as well as answer the question about if testing for users is necessary at all times. I've done a comparison between what the literature says, and what a company says, about testing. The tests that's been in focus in this study is prototyping and card sorting tests. Prototyping aims to give the developer feedback about the design and check if there are any obvious problems with the design. A card sorting test can be used to get input about how information architecture should be constructed.