Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

The forest property Fagerdal 2:10 was donated to the Swedish University of Agriculture in 1995 by Erik Rönnberg. The dominating species is Norwegian spruce (Picea Abies) and the average age is high due to selective cutting. The aim of this study has been to analyze how the forest on the property should be managed and demonstrate how a better estimated forest data affects the future management. The impact of the management on the carbon stock of the property was also examined. A forestry plan established in 2009 by Skogssällskapet was used as a basis for the analyses.

In 2006, Stora Enso Skog implemented an education program in water management for harvester operators, timber purchasers, cut block planners and supervisors. The focus of the program was creating stream crossings with minimal harm to the stream and the surrounding riparian area. This main purpose of this study was to determine the difference in work procedures before and after participating in the program. The methodology consisted of field studies and interviews with harvester operators and their supervisors. The field study looked at how the streams had been crossed concerning the number of crossings, visible damage to the stream and/or the riparian area made by the machines. Biological parameters such as the width and dept of the stream and amount of large woody debris in the stream were also measured. The field result from 30 harvesting sites showed no significant difference between sites that had been harvested before or after the education program. But the harvester operators and their supervisors experienced an increased concern for watersheds after the educational program.

Fieldstudys on 22 farms (23 silos) to study relationships between the actual particle size of the maize silage and the theoretical length of cut. The measure of theoretical length of cut were stated by the farmers and not measured by us. Particle size of maize silage was determined using the New Penn State Forage Particle Separator. SLU Skara made a special sieve for us, that had larger holes than de original sieves. The samples were shaken after instructions and then the material was weighted. We have also been taking out samples for microbiological analyses from the silos on 13 of the farms.

As birch is one of the most common trees in Sweden, and probably one of the easiest for someone who lives here to identify, it is interesting to note that most people do not know how variable the genus is and how widely it is distributed across the northern hemisphere. One can find birch growing at both high and low elevations, demanding different soil conditions and preferring varying amounts of sunlight. Many people may also be surprised to hear that the colour of the bark can vary from bight white to almost black, and different shades of pink, orange and red can also be displayed. This, together with the astonishing beauty of the genus, the important role as a pioneer in many ecological systems and the difficulty in sorting out the taxonomy of the genus, constitutes the background of this thesis. The thesis is written at the Department of Landscape Development in Alnarp, Sweden with Kenneth Lorentzon, researcher at the Swedish University of Agriculture as a supervisor. The aim of this thesis is to highlight which species and cultivars within the genus Betula could be appropriate for horticultural use in Sweden.

För att öka lönsamheten på ett sågverk gäller det att sortera timret rätt från början. En mer precis timmersortering resulterar i ett effektivare flöde genom hela produktionsprocessen. Förbrukningen av resurser i sågverket minskar samtidigt som det medför möjligheten att redan innan sönderdelningen av timmerstocken kunna styra rätt råvara mot efterfrågad produktkvalitet. Denna sortering är speciellt intressant när det gäller uppdelningen av frisk- och svartkvistig stock. En friskkvistig råvara är speciellt lämpad för vissa produkter med estetiska kvalitetskrav och den svartkvistiga råvaran lämpar sig väl i produkter där kraven på hållfasthet är speciellt starka. Syftet med denna studie är att visa på de konkreta ekonomiska effekter som ett väl avgränsat effektiviseringsprojekt i sågverksmiljö kan innebära.

Med väl fungerande interna logistiska flöden kan hela produktionen effektiviseras samtidigt som man kan skapa mer bränsleeffektiva transporter. Ett företag som är intresserade av att både kunna arbeta mer effektivt med sina transporter och spara på bränsle både för miljön och för kostnadernas skull är Vargön Alloys AB i Vargön utanför Vänersborg.Vargön Alloys är en av Europas största tillverkare av olika Ferrolegeringar. Legeringar ger bl.a. stålet hårdhet och förhindrar korrosion. Företagets kunder är Europas ledande tillverkare av specialstål.Ett problem för Vargön Alloys har varit att man inte har någon dokumentation eller kartläggning över hur de interna transporterna sker idag.

Norske Skog Jämtland AB is like many other companies in a situation where it has to increase its purchases to provide its industries with raw material. To increase the available amount of raw materials, many companies employ purchasers to cover larger areas. This study aims to find out how to handle the increasing competition for timber suppliers. An important input for defining such a strategy is to examine how the suppliers view their relation to the company today. For a company it is extremely important to have a good relation with the suppliers to secure long term supplies.

Today's Swedish large-scale forestry uses almost exclusively computer-aided bucking. It allows the harvester computer, using an optimisation price list (steering price list), to maximize the value of each tree. The optimisation price list can be adjusted so that the industry gets the raw material it demands from the forest. There are various simulation programs that can be used when constructing a optimisation price list. The simulation program merchandise a database of stem shapes using a given price list and mimics a harvester's work. To get the demanded raw material for the industry it is important to use a well-adjusted optimisation price list.