AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

Abstrakt Detta kandidatarbete handlar om visuella effekter inom film och dess utveckling genom åren. Visuella effekter har öppnat en ny värld för filmskapandet då man kan skapa i princip vad som helst vilket gör att det omöjliga helt plötsligt blir möjligt, på filmduken. Kandidatarbetets syfte är att titta på utvecklingen av visuella effekter och hur man kan använda de kunskaper i en mindre filmproduktion. Vår problemformulerings frågeställning är ?Hur har utvecklingen inom visuella effekter sett ut och hur kan man implementera dessa kunskaper i en mindre filmproduktion??. I undersökningen analyserar vi hur man skapat scener i olika hollywoodfilmer som vi tagit inspiration av i vår produktion.

Metso Paper in Karlstad is acquiring Kvaerner Pulping and Kvaerner Kamfab, also located in Karlstad. Following this acquisition, there are going to be changes in the organizational structure and some employees might even loose their jobs. There are guidelines from the European Union how to handle situations like this, the purpose of these are to protect the employees. There are also Swedish laws that regulate the protection of the employees when a company is acquired, who is going to keep their job and who is to be made redundant.The transaction between the companies is large why they need an approval from the European Union. The European Union has certain demands for the approval.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

Ökad användning av byggtekniken massivträ kan ge ett positivt bidrag till hållbart byggande. Utvecklingen inom datornavigerad bearbetning ger massivträ möjligheten att rationalisera byggproduktionen inom trä. Tekniken ligger rätt i tiden och kommer att värderas allt högre då den tillvaratar materialets karaktäristiska egenskaper.Utvecklingen av massivträ har resulterat i teknikvarianter av hur virke kan sammanfogas till solida element. Ett behov har funnits av en marknadsjämförelse mellan befintliga principer där studien förtydligar grundläggande skillnader för intresserade byggaktörer. Problemfrågan för denna studie har varit: vilka principer för sammanfogning av trä till plattelement inom massivträ är mest fördelaktiga? Detta sett utifrån faktorerna produktionskostnad, hållfasthet och ekologiska övervägningar.För att förtydliga den undersökta byggmetodens nytta i ett vidare perspektiv har det presenterats en allmän beskrivning av massivträ.

During the late 1800s fire suppression became increasingly effective in northern Sweden which led to decreased areas of fire-disturbed woodland and successive changes in the structure of forests. In the long run this can pose a serious threat to fire-dependent and fire-favored species. Today some fire-prone forest reserves are burned as a nature conservation act. Often partial cuttings are made before burning, with somewhat different motives. The purpose of the study in Långsidberget nature reserve was to give a general picture of forest history and its affect on today?s forest condition, and to show how partial cuttings affect burning conditions and results. Långsidberget is located close to areas that were colonized during the Middle Ages.

During the last decades the housing sector has increased continuously, and housings and services accounted for 40 % of the energy usage in Sweden during 2011. The expansion in number of buildings in society has resulted in an increase in both energy usage and emissions of greenhouse gases. It is crucial to enable a sustainable development of society and as a result, the demand to reduce the emissions of carbon dioxide is a current question. In this study, the carbon dioxide emitted from the housing sector in Stockholm is estimated. The housing sector can be divided into different types of houses such as apartment blocks, single-family houses and holiday houses. By collecting information of the energy purchased in respective households, a computational model is generated that calculates the total emission of carbon dioxide.

Plant nutrients are important for all life on earth and are also important as fertiliser infood production all over the world. Because of this, plant nutrients are of great valuebut they also bring problems. As an example, the loss of nitrogen and phosphorusfrom agriculture and urban society's sewage systems contributes to some of today?smajor problems in water environment. Another problem associated with plantnutrients is that finite recourses are used in the production of mineral fertilizers.

It becomes increasingly more important that, as a new buisness, both to be seen and heard in an increasingly harder competition situation where the range of similar products and services increase. It requires a well planned and well thought visual profile to succesfully stand out on the market. To give a good impression, this profile should be both distinct and aesthetically appealing. In the making of a new profile it requires creativity to succesfully think in new directions and to separate from the competition.This practical report presents the production process for a designsolution to the new website Röstförmedlingen (Voice agency), a commission from the production and commercial bureau Bartos media. The task in this project was to create a graphic profile and a lofi-prototype that would represent Röstförmedlingen as a buissness.

Holmen Paper is one of Sweden?s leading manufacturer of paper, with two Swedish production facilities located in Norrköping and Hallstavik. The European continent constitutes the company?s largest customer base which makes the company?s distribution system an integral part of the business. Historically, much of the produced paper has been transported by vessels, as vessels allow large volumes of goods and deliveries to markets which are difficult to reach with other modes of transportation.

Abstrakt Detta kandidatarbete handlar om visuella effekter inom film och dess utveckling genom åren. Visuella effekter har öppnat en ny värld för filmskapandet då man kan skapa i princip vad som helst vilket gör att det omöjliga helt plötsligt blir möjligt, på filmduken. Kandidatarbetets syfte är att titta på utvecklingen av visuella effekter och hur man kan använda de kunskaper i en mindre filmproduktion. Vår problemformulerings frågeställning är ?Hur har utvecklingen inom visuella effekter sett ut och hur kan man implementera dessa kunskaper i en mindre filmproduktion??.

Holmen Skog AB is an important supplier of conifer pulpwood to the Iggesund Paperboard mill. After logging and transport to the landing by a forwarder, the wood is loaded on trucks for further transport, often by using separate loaders. During this handling process considerable amounts of stone material is sometimes mixed into the pulpwood and this causes problems for the industry. The aim of this study is to identify which part of the chain from forest to pulpmill, that contributes the most to this contamination. Sizes and total volumes of the contaminating stones were also investigated.

Half of Sweden?s 140 000-150 000 sows are culled and replaced by 75 000 gilts annually. Culling of old sows is necessary and allows new breeding material to enter the herd. However, many of the culled sows are young, and have not yet become profitable at the time for culling. Therefore, it is an important question for the pig industry, how to raise gilts to sows with a high and sustainable production level.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.