Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

Rundviks sågverk investerade vintern 2007 i systemet GPS Timber. Systemet som är GPS-baserat syftar till att underlätta timmerhanteringen och säkerställa att rätt timmerklass läggs i vältorna och på sågbordet. Dessutom samlar systemet fortlöpande in data angående truckarnas aktiviteter för att möjliggöra analys av vad som sker på timmerplanen.Studien syftar till att undersöka vad införandet betytt för truckförarnas arbete med timmerhanteringen samt vad systemet har för effekt på ekonomin. Med hjälp av insamlad data av GPS Timber ska analysen dessutom resultera i potentiella effektiviseringsområden rörande timmerhanteringen för att förbättra ekonomin i en relativt dyr process. Analysen har visat att truckförarnas arbete har förenklats mycket i och med införandet av GPS Timber.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

Urban forests are important for people to get at break and be able to relax in a stressful world. Several studies show that we feel better through being out in the forest and historically this was the normal environment for us. As a result of population growth and urbanization we tend to spend less time in nature nowadays than before. Due to this development urban forests have become a central role in our society as a place where people can fulfill their needs and interests. The management of the urban forest is therefore important, especially for municipalities that own forest which is supposed to be of benefit to local residents.Falköpings municipality owns approximately 260 hectares of forest in the popular and most visited recreational area along Mösseberg?s southern slope.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

The aim of this thesis is benchmarking of the program, based on dynamic programming, that earlier was written to imitate the production planning at TSS.This thesis starts with a chapter about the construction of the DP-program, a shorter description of one and each of the program parts and also a list over the in- and output data in each program part. The DP-program consists of six linked MATLAB-files that together produce an optimized production plan for the different planning groups at TSS. The program reads in and reformat the given data and optimize the production of the articles in one group. Finally it compounds all article production plans and give us a production alternative.After running the program with new data the result shows, resembling with previous results, that TSS could be able to make some distinct cost-savings. According to the program, a 50 % decrease of TSS production costs is possible. .

In 2009 The National Land Survey of Sweden, Lantmäteriet, commenced a project intended to provide a new digital elevation model (DEM) of Sweden. The method chosen for the project was airborne laser scanning (ALS). In addition to information about the land surface the project will also provide information about the forest, this as a by-product. This data can be used to estimate forest variables such as height and volume. The estimates are often more reliable than what is standard today. This study is based on interviews with employees and members of the forest owner association Södra in southern Sweden.

Extensive planting of the tree species lodgepole pine (Pinus contorta var. latifolia) during the 1970s and 80s has resulted in large areas now being available for commercial thinning. However, the varying quality of the stands creates a problem. The purpose of this study was to investigate, at the Torsby district of the Stora Enso forest company, how well the present computer records of the stands correspond to reality and determine which stands are, from a qualitative perspective, suited for Timber production. Finding variables that indicate better stands would give Stora Enso the possibility of selecting qualitative stands which are more profitable to thin. The study included 32 stands containing at least 70 % Pinus contorta.

In Europe poplar plantations has been planted for more than one hundred years. In the first plantation was made in 1940. The interest for poplars has since then shifted over the years and has for long periods been very low but is now slowly increasing again. The main reasons why poplars are becoming more interesting are because of their great production potential. Nevertheless, the knowledge of how to mange poplars in Sweden are very low and very little research has been done concerning management of the species. The objective for this study was to; 1) investigate and document experience and results obtained in practical Swedish forestry, 2) to give a fair picture of the perceived advantages and disadvantages that the poplars has for the forestry, 3) document what the foresters that has experience and those who has no experience of poplar plantations thinks about the potential of poplars.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Restrictions in nature conservations are increasing the influence of forest management. Nobel broadleaved forests are more influenced than other forests, because they are considered to be more valuable than other forest types in Skåne. There has been a lack of knowledge about the amount that is set-aside for nature conservation and what types of forest that is concerned. These are the main questions to be answered in this thesis. Moreover has the timber quality been compared between set-aside and non-set-aside areas since it affect the financial conditions for the forestry in nobel broadleved forests. The last asked question deals with the financial consequences of set-aside.

Holmen Skog has in some places in their operation area access to timber trucks with centre mounted scrapers. They make transportation more flexible and reduce reliance on contractors for road maintenance. The trucks with centre mounted scrapers have a higher tare weight, making them less productive and therefore they receive compensation with a 0.75 % increase on transportation price. The purpose of this study was to investigate what actions a timber truck with centre mounted scraper can perform with acceptable quality in winter, and to examine if it is an economically profitable solution for the truck operator and charterer. The study was done in three stages; interviews, performance analysis of the transportations carried out and an economic analysis with the help of Sven Erik Gilles spreadsheet tool. The study included the districts Delsbo and Hudiksvall.