The study has been done on behalf of and in cooperation with LRF Konsult. The purpose of the study was to try to find out how forest estate buyers valuated different parts of the estate at the time of the purchase and to see if it was possible to identify different trends between different kinds of purchasers. The study is delimited to Västerbotten County and all the purchases were made thru LRF Konsult. The background of the study is that the forest estate purchasers are paying more and more for the forest estates. The prices are often much higher than the net present value which means that they are paying for something more than just the timber value. The study is made with a questionnaire mailed to one hundred forest estate purchasers. Answers got returned from 48 of them.

Forest fertilization had its peak in the late 60´s, when almost 200 000 ha was fertilized annually. The silviculture of today has high demands for timber production at the same time as the demand for nature conservation increases. It means that it?s necessary to produce more volume in smaller areas in the future. The use of DGPS equipment has in modern forestry in Sweden become more and more common.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.

This Master Thesis within Marketing and Strategy investigates the values customers perceive within the Real Estate market in the inner City of Stockholm. The dependent variable is customer satisfaction, and it could be explained by 1) the feeling of light and uniqueness of the apartment, 2) that the apartment is of a satisfying size, 3) the address of the apartment, 4) and the economics, the common areas of the building, and the bidding process. The feeling of light and uniqueness, combined with the number of square meters, and the monthly fee of the apartment, are also identified as the price driven functions of this market. A quantitative method is used to investigate the market, where 107 apartment buyers completed a survey..

Fitting in is something that many strive for in today?s society. In order to do this, more or less all of us use impression management. The illness Anorexia contradicts the norms of society since eating is a fundamental need, and to refrain from this is therefore a major discrepancy. It is the impression management among anorectics we have chosen to put our emphasis on in this survey in which about ten people have been interviewed with a qualitative method.

This study in the subject of forest planning is made for Sveaskog and its aim is to develop tools that prognosticate outcome in terms of volumes per sort from not yet cut forest stands. The degree of detail is just to get reliable results for at least one months volumes, for Sveaskogs own forestland in the market region of Norrbotten that is about 100 000 m3fub. The course of action to accomplish this is regression analysis and the data consists of cut tracts on own forestland in Norrbotten during the years 2006, 2007 and 2008. That is a little more than 4 million m3fub. Two tools were made.

ABSTRACT Title:                         Lucrative dealsHow service offers and its clients is forms by Optional Framing                 Level:                       Bachelor, Business AdministrationAuthor:                     Gabriel Krogius, Mikaela SörensenSupervisor:              Jonas Kågström, department of economicsDate:                         2013, AugustIntroduction:           That the human mind may be directed by how an offer is designed is not news. However, what is new in the following thesis is whether a person is affected in the case of a service rather than, as previously research, a physical product. Does a person find it harder to separate with something rather than to add an option?Aim:                          The aim for this thesis is to examine how Optional Framing has affection on service offerings/companies, and in this case on real estate brokerage services. Is it, as earlier, when the human can form her own offer, the final price ends up higher when she is about to add options than removing them?Method:                    The thesis emanates to achieve earlier results where the difference in this case is that our thesis is targeting service offerings.

To value the risk and opportunity for our production in Sweden it is necessary to understand the marketing development for beef cattle production in the world. We have chosen to look at the Brazil beef cattle production. They are one of the biggest producers, have good opportunity to develop further and have a big affect at the world market. The method of our work is to gather information from experts of beef cattle production, located in Brazil. We have also gathered information through studies of literature. The factors that will have a big influence at the Brazil beef cattle production during the upcoming years is more efficient land use, lower age of slaughtering and extended use of feedlot-system. Our conclusion is that the Brazil beef cattle will have a sharp increase during the next five years. The amount of pasture will not change during that time.

Lattelement AB in Ornskoldsvik is one of the leading companies in Sweden in composite elements in walls, floors and roofs in particular. The company supplies elements to buildings located with a wide geographical variation, which means that the products are subjected to very different climate with regard to snow, wind and humidity. This places high demands and requires the elements to withstand large variable loads.The elements are made of lightweight beams with flanges of structural timber and beam webs made of OSB. These are bound together by nogging pieces with the same kind of structure. On top of the beams a nailed and glued plywood is added to absorb compressive forces and on the underside of the element a sheet of steel is added for tensile absorption.These elements are then attached to the building framework in different ways depending on the particular element height, loads and the structual supporting material of the frame work.

In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.

This bachelor thesis summarises the history of ?Jämtgården? based on literature research andempirical documentation. Jämtgården is a typical 1800th century duplex timber buildingoriginating from the province of Jämtland. However, it was moved to Västernorrlandslänsmuseum in Härnösand in the year of 1918. During the 1920's the museum decided tofocus on the region of Västernorrland and therefore Jämtgården was somewhat left behind.The building's interior walls are decorated with distemper paintings but the current conditionis poor.The aim of this thesis is primarily to compile knowledge about the building and its interiordecorations as well as finding out whether primary distemper paintings, from the periodbefore the relocation, remain on the walls.

Frigoscandia Freezer AB have seen themselves as an entrepreneur company for a long time, but have lately begun to realise that they have to go against a more administrative era. With that insight they have begun to examine their enterprise in order to achieve this. The division Team Spare Parts has started a project with the intention of checking-up the inventory management, and improving it for the future. To get support for this and other point of views, they decided to let us do our exam thesis as a part of the project.The first part of the thesis deals with the appropriate inventory theory. All calculations in the other parts of the thesis have been based upon this.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

Due to historically low prices for electricity in Sweden, many small-scale hydropowerplants were closed down. A small-scale power plant has more or less the samemaintenance costs as larger plants, but doesn?t generate as much income. Today?sincreasing price for electricity in combination with a desire for renewable energysources makes small-scale hydropower interesting again.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.