Sök:

Sökresultat:

287 Uppsatser om Timber lengths - Sida 12 av 20

Solel från ljudbarriär : längs Annetorpsvägen i Hyllie, Malmö

City of Malmö has ambitions for the district Hyllie to become a demonstrative area ofsustainable urban development. As a part of this the following report aims to investigate the potential in using noise barriers combined with photovoltaics along Annetorpsvägen to generate solar electricity. To quantify the losses that shadows from buildings along the roadmight cause, a 3D-model of the area was constructed in SketchUp. This digital model made it possible to simulate shadows and how they change over the year. A reference model of a photovoltaic noise barrier (PVNB) was constructed and used to find the dates on which the solar cells are shadowed depending on building heights and positioning of the barrier.The results show that two lengths with a total distance of 400 meters is appropriate for applying photovoltaic noise barriers.

Effekt av sönderdelningsgrad och planteringsdjup på uppkomsten från rhizom av Tussilago farfara :

Tussilago farfara, coltsfoot, is a troublesome perennial weed with deep lying rhizome, which can vegetatively generate new plants. The mechanical control of coltsfoot that is used today, "starvation", which consists of several cultivations of the soil, which fragmentises the rhizome. This results in production of new shoots, which leads to depletion of nutrient resources; as long the new plant is not allowed to establish. However, very little research has been done to investigate how the starving technique affects the regenerative ability of coltsfoot. The purpose of this experiment with coltsfoot was to investigate how fragmentation and burial depths affect the time of emergence, number of emerged shoots per rhizome fragment, number of shoots per node, and if the germination ability within nodes changes during the experiment.

The effects of mother trees and site conditions on the distribution of natural regeneration establishment in a Bornean rainforest disturbed by logging and fire

In the tropics, logging and wild fire can result in degraded secondary forests with lower biodiversity than in the natural forest. One way to limit forest degradation is to rehabilitate the present large areas of secondary forests. However, there is a lack of knowledge concerning the ecology of tropical tree species and further studies would be advantageous for future rehabilitation efforts of degraded rainforest. The objective of this study was to investigate how mother trees in secondary forest and different site factors affect the abundance and spatial distribution of natural regeneration of non-pioneer tree species in a tropical rainforest in Sabah, Malaysia. The study took place in the INIKEA Forest Rehabilitation Project area, which suffered from wild fire in 1983 and has been selectively logged over both before and after the fire. Natural regeneration and site variables were inventoried in plots, while mother trees were inventoried in the whole survey area.

Vi i individualismens samhälle? : En studie över fackföreningsorganisationens ställning i det individualistiska samhället

In Sweden, the labour movement historically had influenced both society and politics. In recent times, it is considered a change in society with a stronger employer party while the unions weakened by reduced unionisation. This study aims to highlight the presence of individualistic and collectivistic approaches to the labour market in relation to union density. The different approaches are investigated in the labour market by means of a quantitative survey. The study's survey items are workers in the timber industry.

Alternativa skogsbruksmetoder i Norden : ett välbehövligt komplement?

Clearcutting systems have been the dominating silvicultural approach during the last decades in the Nordic countries. While economically rational, it is also leading to a trivialisation of the flora and fauna, and may result in negative reactions of people in urban settings. As a consequence of this, and a more diversified view on which goods and services forests should deliver, there is an increasing interest in broadening the range of silvicultural methods that are used. The term continuous cover forestry (CCF) represents a suite of methods that have gained increasing interest in the Nordic countries. In CCF a considerable amount of the trees are left after harvest to favour values that require a continuity of tree-covered areas. There are thus hopes that this method will meet the needs for maintaining biodiversity and satisfy social and cultural values.

Långvarig ventialtorvård hos patienter med hög ryggmärgsskada- tid för urträning och bakslag i form av returer till intensivvårdsavdelning

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

Postningsoptimering vid sönderdelning av fura vid Säters Ångsåg :

The aim of this project is to optimise the sawing patterns used for sawing Scots pine at Säters Ångsåg AB. The thesis has a theoretical approach and does not claim to be fully applicable in a practical point of view. The input used in this project is last year?s sales volumes and prices of sawn products. The input of the timber is collected from the database ?VIOL?.

GIS-stöd för tunga rundvirkestransporter på väg

För att framföra en timmerlastbil med 74 tons bruttovikt i svensk trafik,krävs ett tillstånd från Trafikverket. Tillståndet består av ett dokument somvisar vilka vägar och broar fordonet får trafikera och vilka regler som gällernär man kör lastbilen.Skogsbolaget Sveaskog startade ett examensarbete med syfte att skapamöjlighet att i realtid presentera för lastbilsföraren vilka vägar och broarsom är en del av transportdispensen. Detta skulle ske genom att utveckla ettkartstöd för lastbilens fordonsdator med anslutning till GPS för attvisualisera dispensdokumentet med de angivna vägsträckorna och broarna.Resultatet av examensarbetet är ett kartstöd som använder tjänster frånArcGIS Online för att presentera geografisk information för användaren.Bakgrundskartan består av en grundkarta från ArcGIS Online. Övergrundkartan ligger ett GIS-skikt med vägar och ett annat skikt med broar.Information om huruvida fordonet för närvarande färdas på en väg somingår i tillståndet eller inte, samt information om regler som gäller för broarpå vägavsnittet, presenteras för föraren i realtid. Denna informationuppdateras vid varje uppdatering av GPS-positionen..

Analys av värdeoptimeringen i justerverket : Rörvik Timber

I takt med konkurrensen ökar på marknaden väljer många sågverk att i allt högre utsträckning kundanpassa sin produktion mot de krav kunderna ställer på produkterna. Sågverkens produktion bör vara inriktad på att skapa ett så högt värdeutbyte som möjligt där virkets egenskaper och produktionsanläggningens förutsättningar ställs mot de kundönskemål som finns. (Lycken, 2000) I sågverkets justerverk sorteras trävarorna i olika sorteringsklasser, även kallat kvalitetsklasser, samt kapas i exakta längder. För att kunna skapa ett högt värdeutbyte krävs det kunskap dels om vilka av träets egenskaper som är avgörande för värdet med dagens sorteringssystem och dels en insikt i hur volym- och värdeandelar ser ut för olika produkter samt hur olika sorteringsregler styr värdeutbytet. Sedan början av år 2008 har Rörvik Timber Rörvik AB ett BoardMaster-system i sågverkets justerverk som använder färgkamerateknik för att värdeoptimera trävarorna. Examensarbetets syfte är att analysera värdeoptimeringen av trävarorna i justerverket vid sågverket i Rörvik.

Hackelselängdens betydelse för tuggtid och foderkonsumtion hos mjölkkor :

Today, our cows experience a harder pressure to achieve higher milk yield. To manage this challenge the animal needs first class feeding and treatment. An important aspect of the feeding is to fulfil the need from the cows of especially fiber; and fiber with a sufficient proportion of long particles. Both too much and too little fiber is bad for the wellbeing of the cow, and she might get diseases like acidosis. Many models for feed management have been developed to secure that the animal gets enough of e.g. fiber with a sufficient proportion of long particles.

Energianalys av tryckluftsystem : så kan Billerud Skärblacka AB spara energi på tryckluft

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.

Momentbärförmåga för semikompakta ståltvärsnitt av HSQ-balkar : En modell för interpolering mellan eurokodens klass 2 och 3

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Rekryteringsprocessen- ett hinder för jämställdhet? : En fallstudie av ett företag där kvinnor är underrepresenterade

Ur ett internationellt perspektiv anses Sverige vara ett jämställt land. Trots detta finnsen utpräglad könssegregering på arbetsmarknaden som ett resultat av traditionellaföreställningar om vad som är kvinnliga och manliga yrken. Träindustrin harhistoriskt sett varit en mansdominerad bransch och det är fortfarande svårt för kvinnoratt få anställning inom den branschen. Vid rekrytering av personal finns möjligheterför företag att förändra den demografiska strukturen hos arbetsstyrkan.Med denna bakgrund ämnade denna studie att undersöka rekryteringsprocessen ur ettjämställdhetsperspektiv på ett utvalt företag inom träindustrin. Företaget har delat insina anställda under två yrkeskategorier, tjänstemän och kollektivpersonal.Underrepresentationen av kvinnor är mest märkbar bland kollektivpersonal och därförstuderades skillnader i hur rekryteringsprocessen ser ut mellan yrkeskategorierna.Studiens resultat visade att jämställdhetsperspektivet inte beaktas i samtliga momentav rekryteringsprocessen.

Anestesi vid kastration av spädgris :

An overwhelming majority of all male piglets are castrated without anaesthesia when they are very young. In Sweden this means that approximately one and a half million piglets are castrated every year. The reason the piglets are castrated is the strong and unpleasant smell and taste, the ?boar taint? that the meat from intact boars sometimes exhibits. Boar taint is chiefly cause by androstenone and skatole, two compounds that are mostly produced by sexually mature boars and are accumulated in the subcutaneous fat.

Glastaket : ett bärande klimatskal

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

<- Föregående sida 12 Nästa sida ->