The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Restrictions in nature conservations are increasing the influence of forest management. Nobel broadleaved forests are more influenced than other forests, because they are considered to be more valuable than other forest types in Skåne. There has been a lack of knowledge about the amount that is set-aside for nature conservation and what types of forest that is concerned. These are the main questions to be answered in this thesis. Moreover has the timber quality been compared between set-aside and non-set-aside areas since it affect the financial conditions for the forestry in nobel broadleved forests. The last asked question deals with the financial consequences of set-aside.

Holmen Skog has in some places in their operation area access to timber trucks with centre mounted scrapers. They make transportation more flexible and reduce reliance on contractors for road maintenance. The trucks with centre mounted scrapers have a higher tare weight, making them less productive and therefore they receive compensation with a 0.75 % increase on transportation price. The purpose of this study was to investigate what actions a timber truck with centre mounted scraper can perform with acceptable quality in winter, and to examine if it is an economically profitable solution for the truck operator and charterer. The study was done in three stages; interviews, performance analysis of the transportations carried out and an economic analysis with the help of Sven Erik Gilles spreadsheet tool. The study included the districts Delsbo and Hudiksvall.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

To effectively manage a forest resource for both economic and other values good planning is required. The problem is complex since you want to know which forest to cut and when. Often a hierarchical planning structure is applied, including strategic (long-term), tactical, (medium-term) and operational level. Today SCA Forest is one of few forestry companies in the northern Sweden with an integrated forest wood supply and industry. The goals of the company are to supply their own industries with wood and to manage the resources of the forest through a long-term perspective with satisfactory profitability.

This essay aims to investigate a rare method of marking up timber before hewing it. The method for marking up timber is by eyesight, where visual judgment and the use of a broad axe are the tools employed. The broad axe is driven through the bark and exposes the inner bark in a straight line. The method is described by a craftsperson dating back to the 1930s. There is a lack of information regarding the method.

This report has been done in collaboration with SCA Skog, Norrbottens Forest Management Area. The purpose of the survey is to try to find out what the forest owners who either live in Norrbottens Forest Management area or outside but has their forest holdings in the administrative area has the vision of SCA Forest and their forest services offered by the administration. But also to find out the presences of other timber buying players who procures timber in the administrative area. This study seeks to determine if there are deficiencies that may need changes or improvements to the prevailing conditions in Norrbottens management area. The literature study is about how to design a questionnaire based on what you want to know and what to consider in order to eliminate the problem of constructing a questionnaire. A questionnaire was sent to 400 randomly selected forest owners who have their forest holdings within SCA Forest Norrbotten Management Area. And of the 400, it was 181 respondents with 39 women and 138 men.

I have done a follow up study of the restoration of two rivers, Röälven and Grundan, in order to evaluate the effects of the restoration on the endemic population of trout. Both rivers have been used for timber floating during many years throughout the 20th century, and because of this, had all obstacles such as rocks and wood parts removed. In 2004-2005 both rivers were restored, and rocks and wood were put back into the rivers. Spawning grounds were created and boulder dams were constructed to promote the streaming water. The result showed that the trout population of both rivers increased after the restoration, but also that the trout population of Röälven increased more than that of Grundan.

Today, a large proportion of wood supplied for the Swedish forest industry is bought from private forest owners while forest companies at the same time provide the forest owners with services such as logging services and transportation. Today, forest companies work extensively with keeping the time used for transport and logging short. But what does the private forest owners think about the time required for the timber deal, also called lead time, and the different parts of the timber deal. In this thesis, the forest owners? perception of the different lead times in their contracts with Stora Enso and their communication with the purchasers is examined.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

This study was conducted on behalf of SCA forest AB, Västerbottens forest administration. Timber procurement from non-industrial private forest owners has become an increasingly important part of SCA:s wood supply. The objectives of this study was to report the current forest conditions in the private forests in the county of Västerbotten, analyse the potential for procurement of wood from private forest owners, and provide a basis for decisions on future strategies for timber procurement from private owners.Material and data have been collected from different sources, mainly from Swedish National Forest Inventory and SKA-VB08. This material was the basis for the analysis and calculations performed with the Heureka application PlanWise. This study area was divided into six different analytical areas (Coastal south, Coastal middle, Lycksele, Inland south, Inland north, Skellefteå), where each area of analysis is represented by a number of municipalities.In this study, two scenarios were specified; one describing the current forest management with current harvesting levels and the effects of these assumptions, the second to illuminate what potential there is for future timber harvesting.

The construction and use of buildings in the EU accounts for half of the EU?s extracted materials and energy consumptions, and a third of greenhouse gas emissions. In the past decade, the construction sector has responded to such concerns by focusing on post production energy efficiency. However, new findings indicate that upstream construction processes influence emissions significantly ? necessitating a shift in focus to include material choices and building processes.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..