Birch is the dominant deciduous tree species in Sweden but only 16 % is found in pure birch stands. The majority of the birch (51 %) is to be found in conifer dominated stands. Swedish forest land comprises approximately of 23 % mixed stands and one problem is that for mixed stands there are few management recommendations. The underlying aim of this thesis was to study the management of mixed forest stands of spruce and birch to achieve good timber quality of birch. The study was based on a literature study and measurement in a field experiment launched in 1998 by the Swedish University of Agricultural Sciences (SLU).

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

Norrborns Industri AB in Bollnäs manufactures truck trailers with the brand Parator. One of their trailers is Parator LX 10-20. The trailer is designed to transport hooklift containers with the option to tip loose goods such as gravel, asphalt and seed. The container is mounted on a frame which is placed on the chassis. To reduce weight a redesign of the trailer is needed.

After contacting the company Elite Group Sverige AB, who sells strollers under the brand Crescent Baby, it was determined that the project group were to develop a three wheeled stroller which was going to be Crescents first own developed stroller. Only the frame of the stroller was considered within the demarcation of this project however care was taken to the placement of the carry-cot and the wheels etc. Crescent Baby wished for the frame would be smaller than the competitor Urban Jungle, that the frame would have at least three unique selling points and that the number of unique parts was to be minimized. The work began with information seeking regarding strollers, competitors, independent tests, European standards and consumer interviews. After that a number of concepts were developed and past to Crescent.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

Ett sekellångt förbud mot att bygga hus med trästomme högre än två våningar har gjort att värdefulla kunskaper om träbyggandet gått förlorat samtidigt som andra material istället etablerat sig på marknaden.För utvecklingen av flervåningshus i trä har Växjö blivit en förebild för andra städer i Sverige och resten av världen. Med denna studie vill författarna skapa en uppfattning om var i utvecklingen vi står idag samt tillvarata erfarenheter från fyra representativa projekt.Målet har varit att ta fram faktorer i produktionsprocessen som påverkar tid, kvalitet och ekonomi för flervåningshus i trä. Dessutom har det undersökts i vilken grad och på vilket sätt erfarenheter från tidigare projekt omsatts i senare projekt.Arbetet resulterar i ett antal punkter som är viktiga att ta ställning till vid en byggnation av flervåningshus med en träbaserad stomme. Dessa punkter berör bl a vad som behöver beaktas vid hög prefabriceringsgrad, varför och hur väderskydd bör användas samt hur sättningar påverkar en träbyggnad. Utvecklingen är starkt beroende av kontinuitet och av att fler hus av denna sort byggs.

Recent studies about refugees have shown that there are differences in how refugees are framed, depending on where they are fleeing from. Studies have also shown that right-wing populism and refugee framing can be linked. With the theoretical framework of Banulescu-Bogdans three frames and right-wing populism, this study examines how polish politicians within the PiS party have framed refugees fleeing in 2015 in contrast to refugees fleeing in 2022.The aim is also to analyze how and if right-wing populist discourses are reflected in the frames. Using framing analysis, nine statements from different PiS-politicians were analyzed. The results show that the dominating frame towards refugees during 2015 was the threat-frame, contributing to frame the refugees as a cultural threat and security threat. The dominating frame used towards refugees 2022 was the victim-frame, contributing to frame the refugees as deserving and worthy of help. Furthermore, right-wing populist discourses were clearly existing in the framing of refugees in 2015. Discourses as ??us?? and ?? the other?? along with signs of nativism are reflected in the frames.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Transportation represents 10-15 % of wood supply costs. It is therefore important to improve efficiency in the transport system to decrease these costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

This report describes the construction work of a radar antenna for the radar systemCARABAS. CARABAS is a long wave airborne ground radar that has been developed bySAAB Microwave Systems and will now be mounted on a small helicopter, Schweizer 300.The antenna should be able to fold up and down. When the radar is in use the antenna islowered and under transport, start and landing the antenna is folded up. An emergency dropfunction should also be included in the design of CARABAS III.The extent of this report includes construction of the antenna, frame structure attached to thehelicopter, mechanism for folding the antenna up and down and mechanism for emergencydrop function. The mechanical design of the antenna and frame structure is based on modaland stress analysis, vibration measurement of Schweizer 300 and frequency analysis, andcalculations regarding aerodynamic drag and mechanics.The exciting frequencies of the helicopter and accelerations at those frequencies weredetermined by vibration measurement and frequency analysis.

Rundviks sågverk investerade vintern 2007 i systemet GPS Timber. Systemet som är GPS-baserat syftar till att underlätta timmerhanteringen och säkerställa att rätt timmerklass läggs i vältorna och på sågbordet. Dessutom samlar systemet fortlöpande in data angående truckarnas aktiviteter för att möjliggöra analys av vad som sker på timmerplanen.Studien syftar till att undersöka vad införandet betytt för truckförarnas arbete med timmerhanteringen samt vad systemet har för effekt på ekonomin. Med hjälp av insamlad data av GPS Timber ska analysen dessutom resultera i potentiella effektiviseringsområden rörande timmerhanteringen för att förbättra ekonomin i en relativt dyr process. Analysen har visat att truckförarnas arbete har förenklats mycket i och med införandet av GPS Timber.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.