An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

In the tropics, logging and wild fire can result in degraded secondary forests with lower biodiversity than in the natural forest. One way to limit forest degradation is to rehabilitate the present large areas of secondary forests. However, there is a lack of knowledge concerning the ecology of tropical tree species and further studies would be advantageous for future rehabilitation efforts of degraded rainforest. The objective of this study was to investigate how mother trees in secondary forest and different site factors affect the abundance and spatial distribution of natural regeneration of non-pioneer tree species in a tropical rainforest in Sabah, Malaysia. The study took place in the INIKEA Forest Rehabilitation Project area, which suffered from wild fire in 1983 and has been selectively logged over both before and after the fire. Natural regeneration and site variables were inventoried in plots, while mother trees were inventoried in the whole survey area.

In Sweden, the labour movement historically had influenced both society and politics. In recent times, it is considered a change in society with a stronger employer party while the unions weakened by reduced unionisation. This study aims to highlight the presence of individualistic and collectivistic approaches to the labour market in relation to union density. The different approaches are investigated in the labour market by means of a quantitative survey. The study's survey items are workers in the timber industry.

Clearcutting systems have been the dominating silvicultural approach during the last decades in the Nordic countries. While economically rational, it is also leading to a trivialisation of the flora and fauna, and may result in negative reactions of people in urban settings. As a consequence of this, and a more diversified view on which goods and services forests should deliver, there is an increasing interest in broadening the range of silvicultural methods that are used. The term continuous cover forestry (CCF) represents a suite of methods that have gained increasing interest in the Nordic countries. In CCF a considerable amount of the trees are left after harvest to favour values that require a continuity of tree-covered areas. There are thus hopes that this method will meet the needs for maintaining biodiversity and satisfy social and cultural values.

The aim of this project is to optimise the sawing patterns used for sawing Scots pine at Säters Ångsåg AB. The thesis has a theoretical approach and does not claim to be fully applicable in a practical point of view. The input used in this project is last year?s sales volumes and prices of sawn products. The input of the timber is collected from the database ?VIOL?.

För att framföra en timmerlastbil med 74 tons bruttovikt i svensk trafik,krävs ett tillstånd från Trafikverket. Tillståndet består av ett dokument somvisar vilka vägar och broar fordonet får trafikera och vilka regler som gällernär man kör lastbilen.Skogsbolaget Sveaskog startade ett examensarbete med syfte att skapamöjlighet att i realtid presentera för lastbilsföraren vilka vägar och broarsom är en del av transportdispensen. Detta skulle ske genom att utveckla ettkartstöd för lastbilens fordonsdator med anslutning till GPS för attvisualisera dispensdokumentet med de angivna vägsträckorna och broarna.Resultatet av examensarbetet är ett kartstöd som använder tjänster frånArcGIS Online för att presentera geografisk information för användaren.Bakgrundskartan består av en grundkarta från ArcGIS Online. Övergrundkartan ligger ett GIS-skikt med vägar och ett annat skikt med broar.Information om huruvida fordonet för närvarande färdas på en väg somingår i tillståndet eller inte, samt information om regler som gäller för broarpå vägavsnittet, presenteras för föraren i realtid. Denna informationuppdateras vid varje uppdatering av GPS-positionen..

I takt med konkurrensen ökar på marknaden väljer många sågverk att i allt högre utsträckning kundanpassa sin produktion mot de krav kunderna ställer på produkterna. Sågverkens produktion bör vara inriktad på att skapa ett så högt värdeutbyte som möjligt där virkets egenskaper och produktionsanläggningens förutsättningar ställs mot de kundönskemål som finns. (Lycken, 2000) I sågverkets justerverk sorteras trävarorna i olika sorteringsklasser, även kallat kvalitetsklasser, samt kapas i exakta längder. För att kunna skapa ett högt värdeutbyte krävs det kunskap dels om vilka av träets egenskaper som är avgörande för värdet med dagens sorteringssystem och dels en insikt i hur volym- och värdeandelar ser ut för olika produkter samt hur olika sorteringsregler styr värdeutbytet. Sedan början av år 2008 har Rörvik Timber Rörvik AB ett BoardMaster-system i sågverkets justerverk som använder färgkamerateknik för att värdeoptimera trävarorna. Examensarbetets syfte är att analysera värdeoptimeringen av trävarorna i justerverket vid sågverket i Rörvik.

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.

Ur ett internationellt perspektiv anses Sverige vara ett jämställt land. Trots detta finnsen utpräglad könssegregering på arbetsmarknaden som ett resultat av traditionellaföreställningar om vad som är kvinnliga och manliga yrken. Träindustrin harhistoriskt sett varit en mansdominerad bransch och det är fortfarande svårt för kvinnoratt få anställning inom den branschen. Vid rekrytering av personal finns möjligheterför företag att förändra den demografiska strukturen hos arbetsstyrkan.Med denna bakgrund ämnade denna studie att undersöka rekryteringsprocessen ur ettjämställdhetsperspektiv på ett utvalt företag inom träindustrin. Företaget har delat insina anställda under två yrkeskategorier, tjänstemän och kollektivpersonal.Underrepresentationen av kvinnor är mest märkbar bland kollektivpersonal och därförstuderades skillnader i hur rekryteringsprocessen ser ut mellan yrkeskategorierna.Studiens resultat visade att jämställdhetsperspektivet inte beaktas i samtliga momentav rekryteringsprocessen.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

The purpose of this study was to create a picture of Södra´s round wood transporters usage, and positive or negative experiences of the KOLA-system. The KOLA-system, owned and managed by SDC, is a program for handling timber orders and displaying their locations on digital maps. The study was conducted as a twenty-three question internet-based survey. Of those asked to complete the survey, 57 percent chose to answer the questions. The results of the study indicated that several of the transporters found the system quite good and used it to a large extent. The system also had many deficiencies however, and there was clear potential for further increasing the usage of the system.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

The purpose of this study is to investigate the forest managers view of the edu-cation at the School for Forest management at SLU and the first years of em-ployment. Surveys were sent to batches 05/08, 06/09 and 07/10 a total of 136 question-naires were sent out. 80 people answered the survey, this gives a response rate of 59 percent The former students rated according to a 9-grade scale how satisfied they were with the different courses they had attended during their years as students at the school. The courses in mathematics and statistics got the highest marks with an average of 7.3, while the entry-level course in law only got an average of 4.6. A major part of the former students had in the questionnaire enquired a leader-ship course and a business course with focus on negotiation techniques during their education. There is a wide variety of employment opportunities for the graduated students. Timber buyers and forest managers or planners are just a few positions that for-mer students now possess. The study shows that there is a big difference in the first introduction to a new work place depending on where the student got hired.