This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

When building a house or similar the stress on the ground increases and deformations can arise. The deformations create a foundation that the building is not constructed for and damages on the building arise. The increased stress on the ground can be derived back to the building, but it is possible that the increased stress may well derive from different sources such as other buildings or trees.       The building is an older property, built in the late 19th century alternatively early 20th century, and is today used for rental housing and has suffered severe damages due to subsidence. The goal of the thesis is to find possible causes for these subsidences. The thesis was executed as a combination between literature- and casestudie. After careful studies it has been found that a probable cause for these subsidences is trees. Through field- and lab studies it has been found that the trees has effected the ground through there accumulation of water.

In December 2005 the government ordered a group to investigate the compensation law of expropriation. The purpose was to change the law so that it would reflect today?s conditions of expropriation.  The result of the investigation was that some changes were made in the law of expropriation. The aim of the changes was to strengthen the ownership of properties. Following changes was made in august 2010; the deduction of tolerance was rescinded as well as the rule of presumption and a new rule was added saying that the market value/decrease in market value should be multiplied with 25 percent when the compensation was calculated. The aim of this thesis is to investigate how Trafikverket has experienced these changes from 2010.

In December 2005 the government ordered a group to investigate the compensation law of expropriation. The purpose was to change the law so that it would reflect today?s conditions of expropriation.  The result of the investigation was that some changes were made in the law of expropriation. The aim of the changes was to strengthen the ownership of properties. Following changes was made in august 2010; the deduction of tolerance was rescinded as well as the rule of presumption and a new rule was added saying that the market value/decrease in market value should be multiplied with 25 percent when the compensation was calculated. The aim of this thesis is to investigate how Trafikverket has experienced these changes from 2010.

In December 2005 the government ordered a group to investigate the compensation law of expropriation. The purpose was to change the law so that it would reflect today?s conditions of expropriation.  The result of the investigation was that some changes were made in the law of expropriation. The aim of the changes was to strengthen the ownership of properties. Following changes was made in august 2010; the deduction of tolerance was rescinded as well as the rule of presumption and a new rule was added saying that the market value/decrease in market value should be multiplied with 25 percent when the compensation was calculated. The aim of this thesis is to investigate how Trafikverket has experienced these changes from 2010.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

This study is done on behalf of Södra skogsägarna in the autumn of 2012. The main purpose of the study is to get an explanation to why some of the members are passive in their forestry, and how Södra can stimulate them to become more active. To achieve this a questionnaire study was conducted on the members of Södra in the community of Gislaved. The result of the study shows that there are many different factors that influence whether the forest owner is active or not. Examples of those factors are timber prices, the forest owner's objectives and the forest owner's financial situation. The main goal for the forest owners in the survey was to obtain high economic result and to increase the standing timber volume for the next generation.

The forest in the county of Småland has been utilised for a long time. One of the most important forms of utilisation of wood has been charcoaling for the benefit of the iron industry. Shortage of forest in relation to the iron industry, was discussed already in the 17th century in Sweden. The aim of this study was to analyse the purchase and consumption of charcoal at Storebro Bruk, an ironwork in Småland, during the period 1793-1850, as well as analyse the shortage of forest at the time. To determine the utilisation of the forest in the area, I have used historical sources from Storebro Bruksarkiv.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

The value of game for hunting from a social economic viewpoint is an interesting topic that is currently being investigated in a Swedish research program. The amount of damages that the game stocks cause to the forestry is, and has been in focus for a longer period of time. Something that I saw as missing was an investigation of how much an active game keeping measure might cost in lost incomes for forestry in terms of reduced acreage for forest production. This question was the foundation for this investigation, which purpose is to give interested persons with decent knowledge of forestry an example of how cost estimation for forestry resembling the example that is studied can look like. The measures that has been taken is a felling of forest in different ages on both sides of a forest dirt road to create increased asset of forage for the game, and at the same time give hunters that have their post along the dirt road a better chance of seeing passing animals early and increasing the possibility to shoot good shots. The area, which is a part of The Swedish Association for Hunting and Wildlife Management estate Öster Malma, is also used as an example for guests who wish to learn more about managing ungulates. These guests have now got the opportunity to get information on how big the costs are for the measures that have been taken. The main conclusions of this work is that changed timber prices and foremost a change of interest rate makes big differences on the result of the calculations.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

The goal of this work is to get as good a basis as possible to explain what the owners want for products and services when those doing business with buying groups in Korsnäs purchases regions: Gävleborg, Dalarna, Uppland and Frövi. It should also provide Korsnäs knowledge of the most important factors to consider in business with the owners. Another important aspect is to find out what you have done better at the business with owners, to eventually be able to preserve and take them into account. 300 questionnaires sent out to randomly selected owners in these regions. This is to find out what the owners did not have the products/services of Korsnäs. 29 questions were asked in the affected areas to identify what was missing and to eventually be able to satisfy them.