Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The forest in the county of Småland has been utilised for a long time. One of the most important forms of utilisation of wood has been charcoaling for the benefit of the iron industry. Shortage of forest in relation to the iron industry, was discussed already in the 17th century in Sweden. The aim of this study was to analyse the purchase and consumption of charcoal at Storebro Bruk, an ironwork in Småland, during the period 1793-1850, as well as analyse the shortage of forest at the time. To determine the utilisation of the forest in the area, I have used historical sources from Storebro Bruksarkiv.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

The purpose of this study is to explain how the value of sawn wood changes when sawn wood are cut in 30 respective 60 cm lengths. The raw material into the saw mill will mainly be bucked in 30cm and 60 cm modules. There will also be two alternatives where the timber will be bucked special lengths, 370, 490 and 550 cm but also in 490 and 550 cm.The method used for the study is to simulate both cutting and sawing the woods. For cutting the simulator Timan is used and for sawing the simulator Timberopt is used. When data is generatedfrom the simulators, calculations of some key figures is done and also how much the revenue need to be increased for the sawn wood in order to cover for the increased costs of changing sawn woodfrom 30 cm to 60 cm modulesThe conclusion is that the single biggest reason, impacting the value of the sawn wood is the cutting at the saw mill.When going from 30 to 60 cm modules, the impact will be that the customers to the saw mill must pay more to increase the revenue by at least 10% for the sawn wood in order to justifice the changein production.It is also possible to increase the value of the products further by bucking the timber in three lengths, 370, 490 and 550 cm, in order to get 12 % increase of the share of longer sawn wood (>= 480 cm)..

During the period 1952-2008, real prices of wood before taxes and charges declined. However, the actual net income has not changed by the same percentage as the price list, because taxation, driving costs and the ability to make deductions has changed. This report considers the inflation by using the Swedish consumer price index. Net income refers to the remaining income when relevant costs, taxes and fees have been paid.The purpose of this study was to examine how the private forest owner's real net income has evolved over the period 1952-2008 for three categories of forest owners. These three categories are1.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

Bachelor thesis, Business Administration and Economics Programme, School of Business and Economics at Linnaeus University in Va?xjo?.Spring of 2015 Title: Performance measurement from a cost leadership perspective - A case study on Gekås.Authors: Adrienn Csiszer, Hannah Lundberg & Helena WennerströmTutor: Eva GustavssonExaminer: Karin Jonnergård Keywords: Performance measurement, Performance measurement systems, Generic strategy, Cost leadership strategy, Financial and non-financial measurements. Purpose: The purpose of this study is to examine how a company with a clear cost leadership strategy chooses to work with performance measurements, with a view to comparing a practical example to theorethical approaches. Methodology: The method chosen for this paper is a case study on Gekås AB. The presented data were collected through interviews conducted with four employees on Gekås. Conclusion: The study concludes that for a business with cost leadership strategy the financial measurements are more important than non-financial meausurements. For Gekås it is important to keep the performance measurement simple and understandable for the employees. They only use three measurements (sales, hours and sales per hour) in planning and in evaluation.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.