An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

Our purpose in this paper is to examine if there is any profitability for a company with a factory in the timber industry to invest in a combined heat and power, CHP. Based on analysis and the results that the paper generates, we will give Derome AB a suggestion on how it is a profitable investment or not to installing in a CHP.By investing in a CHP plant, you can get a high efficiency, which means that companies can use their resources more effectively. The Swedish wood industry has by-products of production that can be used for combustion in their boiler which is an advantage.The essay is a qualitative study where we have a case company, Derome AB. In this company, we interviewed two employees who have knowledge in the study. They have helped us to provide information and data about their business.We chose to use the pay-off- and the net present value method, NPV, to see if there are profitable advantages for the investment.

According to recent statistics the construction industry is responsible for the largest waste discharges of both dangerous and non-dangerous waste, when disregarding the "non-dangerous" amount of granite waste produced by the mining industry and the waste produced by the pulp and paper industry. Preventive work within waste management is an ongoing practice so to be able to reduce negative environmental effects. One of the most common actions for the companies to take is to separate the different kinds of waste from one another at the construction site. Although by working with the problem in earlier stages of the process a large amount of the waste could already have been reduced.Companies in the construction business that are actively working to decrease environmental impact in their operations often use an EMS (Environmental Management System). By using environmental management as method the company can manage their environmental work so that actions can be taken where they are needed the most.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

I en mer global och konkurrensutsatt marknad krävs, i allt större utsträckning, att företag väljer att differentiera sig med specifika kundlösningar istället för den enskilda produkten. Genom att, tillsammans med kunden, skapa värde knyter man denna närmare till sig. Ett konsignationslager är en strategisk lagerlösning för att minska avstånden mellan kund och leverantör samt att minska kedjans totala lagerkostnad. SCA Timber har begränsad erfarenhet kring konsignationslager. Av den anledningen har det funnits oklarheter kring hur arbetet bör organiseras. Syftet med studien är att ta fram en best practice för hur SCA Timber ska arbeta med upprättandet av framtida konsignationslager. Studien är en multipel fallstudie av fyra verksamheter inom SCA och baseras på kvalitativa, semistrukturerade intervjuer med respondenter som varit inblandade i upprättandet av konsignationslager. Det empiriska materialet består av fjorton intervjuer. Studien utgår ifrån ett teoretiskt ramverk bestående av teorier kring projekt, kritiska framgångsfaktorer i projekt och skapandet av nyttjandevärde.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.

This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

SCA Timber AB Munksunds sågverk har ett stort problem vid anläggningens timmersortering. Problemet består i att den utrustning som kastar av timmerstockarna från sorteringsbanan och som kallas avpuffare, havererar oftare än vad som kan anses vara acceptabelt. Det som gjorts i detta arbete är att de ingående väsentliga detaljerna ritats upp i 3D-CAD och assemblerats till ett system liknande en sektion av den befintliga timmersorteringen. Detta system har sedan exporterats till dynamiksimuleringsprogrammet ADAMS för att där simuleras tillsammans med timmerstockar av aktuella dimensioner. Simuleringen har så långt möjligt utförts med parametrar liknande de som gäller i verkligheten (hastighet, friktion, densitet etc.).

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Examensarbetet syftar till att hitta samband mellan ytliga sprickor hos virke, i form av dimensioner och karaktärer, som dagens maskinella avsyningssystem inte klarar av. Tyngdpunkten i projektet har legat på att identifiera eventuella samband mellan verkligt djup hos sprickor och de ytliga sprickmått som kan uppmätas med automatisk avsyning av WoodEye. I huvudsak har projektets praktiska undersökningar gått ut på att bestämma sprickors ytliga dimensioner, djup, typ och position med hjälp av automatisk avsyningsutrustning (WoodEye) samt genom manuell uppmätning i ett antal itusågade sprickzoner. Det provmaterial som använts i utförda försök och som legat till grund för efterföljande sprickanalyser har varit av sådan karaktär att det kunnat jämställas med konstruktionsvirke som normalt sett hållfasthetssorteras enligt europasstandard SS-EN 14081-1.I projektet har 568 sprickor, fördelade över 8 olika spricktyper, analyserats. Av erhållna resultat har det konstaterats att störst respektive minst medelbredd uppvisades hos kådlåpor respektive kantsprickor, störst respektive minst medellängd uppvisades hos splintsidesprickor respektive kådlåpor, samt att störst medeldjup uppvisades hos fäll-, kap- och stormsprickor.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

Low- performing pupils at the construction programme.