To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

The object of the thesis is to propose a new lighting plan for the square Fyristorg in Uppsala, and to describe the process which have led to it. It all started when I choosed the place together with the municipality of Uppsala. I have been doing research and analyzed how the place and it´s existing lighting works both during different times of the day and also in the evening. After researching the place and it´s existing lighting I´ve decided to put up the following goals fot the new lighting design. 1. The general light level of the place shall be experienced as higher than today. 2. The light level of the place shall be adapted to the light levels of surrounding places. 3. The lighting shall be free from glare. 4. The lighting shall be adapted to people passing by. 5.The lighting shall be adapted to the surrounding architecture. 6.

Companies today are expected to communicate their responsibility to the world around them. Society?s expectations differ and stakeholders are demanding that companies act responsibly on matters related to climate, work environment and human rights. The purpose of sustainability reports is that companies should measure, present and take responsibility in relation to their internal and external stakeholders. It is intended that a reasonable picture of the company's sustainability performance should be communicated, containing both positive and negative effects.Companies efforts with sustainability issues is industry-dependent and industries with significant environmental problems perform the most advanced environmental statement.

Biogas mainly consists of methane and carbon dioxide, where methane is theenergy-rich gas, and is naturally created when organic matter breaks down in absenceof oxygen, also known as anaerobic digestion. A biogas plant re-creates the anaerobicconditions inside a digester where the organic substrate is fed into and digests toproduce biogas. The gas is then used to produce energy by combustion and can beseen as a completely renewable fuel.Today, energy from biogas is used primarily by major stakeholders such asmunicipalities and thus the plants become very large with high investment- andconstruction costs. There are currently few small plants in Sweden, even though thepotential for agriculture and medium-sized to smaller farms to become self-sufficientin terms of electricity and heat is great. Farms have a natural stock of digestibleorganic material in form of manure or crops for example, which are constantlyavailable.

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

The present study concerns a concept development of a product idea that Bengt Magnuson, associate professor, had when a heavy storm caused a widespread power failure of long duration. With a basic power-producing unit one should be able to get through a power loss. The product could also be useful for other tasks if different modules are connected, e g grass mower or snow-blower.According to the product idea the basic unit will be able to produce electric power enough for a fridge, freezer, TV, and a few electric lamps. Normally the basic unit can be used e g as a mower, when such a module is attached. An increased number of tasks would make the contraption useful and tempting for those who do not own an electrical power set in reserve.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Då ett eventuellt förbud av nya kreosotimpregnerade stolpar kan bli en verklighet inom EU år 2018 letar Vattenfall efter andra alternativ. Stål, betong, limträ och komposit anses idag vara de mest konkurrenskraftiga alternativen och kommer att undersökas i denna rapport. Grundläggande tekniska egenskaper, miljöutsläpp och kostnader för de olika stolptyperna kommer att analyseras i rapporten och jämföras mot den kreosotimpregnerade furustolpen. Rapporten beskriver hur de olika stolpalternativen lämpar sig i Vattenfalls elnät i Sverige.P.g.a. sekretesskäl kommer exakta prisuppgifter inte att redovisas.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

The development within the textile industry is always ongoing with development of new andbetter textiles, which often mean the use of non-natural materials like polyester. This doesn?t lineup with the work shared around the world against an improved environment, so the idea came touse a form of linen fibers instead of polyester as the reinforcing material together with cotton.The idea was to use flax, linen of low quality, which is seen as a waste product and garbage inthe production of high quality linen and flax seed oil. This flax of low quality needs to beseparated before it can be used in cotton spinning machines. Fireball 2 is just that, a process toseparate flax fibers through the treatment of a technique called electrohydraulic discharge.The thesis works goal is to evaluate the Fireball 2 process ability to separate flax fiber.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.