As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

I have done a follow up study of the restoration of two rivers, Röälven and Grundan, in order to evaluate the effects of the restoration on the endemic population of trout. Both rivers have been used for timber floating during many years throughout the 20th century, and because of this, had all obstacles such as rocks and wood parts removed. In 2004-2005 both rivers were restored, and rocks and wood were put back into the rivers. Spawning grounds were created and boulder dams were constructed to promote the streaming water. The result showed that the trout population of both rivers increased after the restoration, but also that the trout population of Röälven increased more than that of Grundan.

The Swedish forest have about 100 000 km of watercourses and it?s an important structure in Swedish landscapes and catchments. In some of the watercourses lives spieces like the freshwater pearl mussel (Margaritifera margaritifera) and brown trout (Salmo trutta) which both are sensitive for inteference from the forestry. The new EU water framework directive has a goal that all surface water will have high or good ecological- and good chemical status at latest by the 22nd December of 2015. The study has been made in the catchment of Håltjärnsbäcken and it is from a national perspective one of the most valuable streams in Sweden and which also have been included in a LIFE-project. The catchment is situated within the Eco-park of Malingsbo-Kloten and managed by Sveaskog AB.

The European Council agreed in 2008 on a climate and energy package to combat global warming. This package is valid for each EU member country and means that greenhouse gas emissions must fall by at least 20% and the EU's energy use to 20%, consisting of Renewable Energy in 2020. The Swedish Government has set stringent climate and energy with the intention to set an example for the rest of Europe. For example, renewable energy sources account for at least 50% of energy use and our climate emissions to fall by 40% by 2020. A combination of these goals and a steadily rising oil price has led to an increased demand for wood fuel in the form of such branches and tops.

The report is a comparative study between spruce plantations where 4 plants are treated with deer repellents and 4 plantations are untreated. The study aims to provide a base for the Forest Society's future decisions regarding the use of wildlife-repellents.  The report indicates that wildlife-repellents work reasonably well for its purpose, the treated stocks were virtually untouched during the planting year and next year while the untreated stocks have been heavily grazed during these years.  Growth difference between grazed plants and ungrazed plants found to be virtually non-existent (0, 01 m) of the treated stocks and 0, 07 m in the untreated plants. Because of the growth differences are so small between grazed and no grazed plants, it seems like the treatment of deer-repellent are unnecessary. Unless you know in particularly that the area has a specific problem whit severe deer-grazing..

Italy is the third largest market in Europe with a population of almost 58 million. The country is the tenth most important market for Swedish sales. Italy has a fairly good economy at the moment and the forecast tells of an increasing strength during coming years. Despite all of this, Sweden is exporting a fairly small amount of wood to Italy. Only around 2,3 % of all Sweden?s wood export goes to Italy.

This graduation paper is based on my interest for wood and its different tonal quality?s.After some time of thinking I decided to write my paper on the tonal difference between two of the most common woods in guitars, East Indian Rosewood and European Maple. I had built two identical guitars before my graduation paper in which the difference was the wood the back and sides were made of. One was being made of East Indian Rosewood and the other being made of European Maple.I chose to speak with a number of people with different angle of approach to the two kinds of wood and its tonal difference and quality?s.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

In the last decade, member states of the European Union have adopted a range of measures to decrease the dependency on fossil fuels. This has led to an increased use of biomass in heat and power production. In some countries, the lack of forest resource has led to large scale power producers importing their biomass needs. Due to high energy content and homogeneity, wood pellets have become an internationally traded commodity used for large scale power production. The Baltic States have emerged as one of the largest wood pellet exporting regions in Europe.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

Secondary deciduous forests, which have their origin in earlier pasture- and meadow-land in slopes along the lower reaches of the Ume river, are thought to contain high nature conservation values, in spite of a relatively low age. The aim of this study was to clarify how factors as historical use, exposition, disturbance dynamics and successional age influences the conservation values in these types of riparian forests and how this can be implicated in the practical work with conservation and management at Umeå municipality. Sample plots were placed in seven stands with a variation of their historical use, exposition, disturbance dynamics and age of succession. Conservation values as structure, tree-regeneration, abundance and composition of vascular plants, amount of dead wood and the abundance of signal-species were measured and registered. The species composition and especially the composition of tree species, differed between forests with different exposition and different historical use.

This is a qualitative study with the aim to find out how caregivers in a resourcegroup experince their work situation. We wanted to know how they where treated by the ordinary staff and what strains and possibilities they can encounter in their daily work. We used semistructured interviews to answer our questions.We found out that the ordinary staff of caregivers always treated the resourcegroup like one of them. A strain that the resourcegroup experienced was the shortage of time which sometimes resulted in that they felt stressful. The resourcegroup work on different floors each day, giving them a chance to see and learn new things.

At the beginning of the 1970´s forestry feared an imbalance in the future wood supply. Because of this anticipated "timber slump" forest companies undertook a variety of measures to counter this. One of these measures was the introduction of exotic tree species. The choice finally ended up with lodgepole pines which were considered a fast growing tree species compared to our native tree species. Theambition for the new lodgepole pine stands were to run these with rotation periods of between 40-60 years, thus smoothing out the ?timber slump? that was anticipated.

The purpose of this thesis was to create a saw pattern program for the sawmill industry. I have chosen to focus on the module that describes the shrinking on the wood. There are several theories about how the wood deforms by shrinking. Several hypotheses were simulated in the program and after testing them I decided to use only one of them (hypothesis C). The program is written in Visual Basic .NET and I choused that program language because it is easy to do changes in the layout. Another great advantage in Visual .Net is that you can mix different languages in the same program.