This diploma work on D-level is made in cooperation with Varnäsföretagen AB in Eskilstuna. The company performs contract manufactured aluminium goods. This work is a continuation on earlier diploma work in Varnäsföretagen AB. Even if the industry process consumes much energy for melting the aluminium goods, they consume a great amount of oil to warm up the building. The purpose of this work is to examine some places in the building and the process to see how much energy it is possible to recycles to the heating system and reduce the costs for heating.

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

A study of paleomagnetic remanence and anisotropy of magnetic susceptibility (AMS) has been performed on the Öje-Diabase in Dalarna, Sweden, and on basic dikes associated with the alkaliquartzsyenite/granite Noran-pluton in central Sweden. Based on isolation of directions of characteristic magnetization in the basic rocks, a division into three different groups (A,B,C) has been made. Group Aconsists of dolerites of Jotnian origin, both dolerites from the Öje-Diabase and dikes associated with the Noran-pluton are included in this group, making them coeval. Group B is suspected to show a re-magnetization from the later part of the Svekonorwegian orogeny. Group C belongs to the Blekinge-Dalarna-Dolerites (BDD). Thermal demagnetization of dolerites revealed two different types of demagnetization behaviours, one where magnetite clearly was the source of the remanence, and an other with a linear decrease in magnetization intensity. The measurements of magnetic anisotropy reveals a magnetic fabric with an almost horizontal foliation and a lineation that indicates a fairly uniform NNW/ S-SE flow direction of the magma..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

The goal of this master thesis project was to develop computer models of some plausiblepretreatment techniques and to assess the potential benefits/costs of using pretreatment andanaerobic digestion for waste management of organic waste from a system perspective. Forthis purpose a computer program called ORWARE has been used. ORWARE (organic wasteresearch) is a program for making life cycle assessments of waste management. As the mainpart of the project work the ORWARE system has been provided with three new models ofpretreatment techniques. The additions consist of: One model of pretreatment with ultrasound,one model of thermal hydrolysis and one model of a screw press.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

Enköping?s Rugby Club has long lacked a bigger hall to gather their members in, where they can meet and socializes outside trainings and games. Thanks to Enköping?s municipality, The Swedish Inheritance Fund, Swedish Sports Confederation, sponsors and club members the clubhouse will be built out with additional 100 square meters.The project is planned in two phases of which phase one is the buildup of the new clubhouse and phase two is the renovation of the existing part. Phase one started with the first groundbreaking in December 2006 and was finished for the season 2007.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

Uppsalahem AB is a municipally owned real estate concern that owns and administrates housing for nearly 30 000 people. The company puts a lot of effort into reducing the energy use of their housing stock. This project is a master?s thesis in the energy systems programme at Uppsala University, carried out in collaboration with Uppsalahem. The aim of this thesis is to provide energy saving measures for fourteen student housing buildings in Uppsala, Sweden.

The dry out criterion (MCPR) has been calculated for the most limiting H2-events for Forsmarks unit 2 and 3, at operating points that are normally not analyzed before each cycle. The operating points that normally are regarded as the ones with the lowest margin to dry out are the ones where the thermal power is the highest at agiven recirculation flow. This report shows that this is not the case for Forsmark 3. MCPR-values at partial power operating points are higher for the limiting case inside rather than on the boundary of the region of operation. It is therefore recommended that the method for determining the dry out criterion for Forsmark 3 is revised to account for this effect.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the prototypes used in functionality tests to establish their feasibility.