An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

The aim of this study was to conduct an instrument test of the Canadian questionnaire Alberta Context Tool (ACT) version Long-Term care for Swedish conditions. ACT is designed in order to measure the context in the care environment and different behaviours related to the changes in clinical practice. In total, 159 Licensed Practical Nurses (LPNs) and Registered Nurses (RNs) within municipality care of the elderly were included in the survey. The test included the instrument's reliability and face validity.The reliability test was implemented through calculation of Cronbach´s Alpha, and showed internal consistency for five of the scales of the ACT-instrument with Cronbach´s Alpha values ranging between 0,728 and 0,873. However, three dimensions got lower values (0,558 - 0,683).The analysis was carried out with content analysis and carried out for LPNs and RNs in separate groups.

Level: Thesis in Business AdministrationDate: 20009-06-11Authors: Anders Johansson & Johan MyhrE-mail: anders@clubsilk.nu,  johan@clubsilk.nuTutor: Mona AnderssonTitle: Company valuation according to Value Based Management ? application to SkiStarProblem: Different operators constantly supervise Companies listed at the stockmarket. The stock exchange market is continuously updating the companie?s present value and their forecasted value. It is important that the companies are able to communicate with the market so that the stockvalue reflects the real value of the company.

The aim of the study was to find repetitive behavioral patterns pre calving that could be used as indications of calving in beef cattle. In the study sixteen Standing- and lying down sensors were attached to the leg of sixteen beef cows. Ten of the sixteen beef cows gave birth to calves during the trial period. From these ten cows, data from six cows were used to assess the sensors fitness for use as calving indicators. The analytical part of the experiment was divided into two parts, calculation of divergence of mean lying time within different time intervals, and the number of lying bouts.The first part consisted of optimization of an equation used to highlight divergence in mean lying time within eight different time intervals (3, 6, 9, 12, 15, 18, 21 and 24 hours).

Berggren, O. (2014) COMSOL Multiphysics ? Ett energitekniskt analysverktyg vid numerisk simulering av köldbryggor och analys av fukt i konstruktionsdetaljer. Examensuppsats i ämnet energiteknik. Institutionen för tillämpad elektronik och fysik vid Umeå Universitet.Konsultföretaget Tyréns har vid sitt kontor i Umeå önskat att utvärdera tillämpningen av programvaran COMSOL Multiphysics.

För att minska energiförbrukningen i Sverige krävs att befintliga byggnaderen ergieffektiviseras. Det finns även befintliga lokaler i landet som är i behov av en sänkt energiförbrukning. Det sker ständigt initiativ kring arbete med energieffektivisering av framför allt bostadshus. När energiförbrukning ska sänkas i industrilokaler läggs fokus på att minska energiåtgången i de invändigaprocesserna men inte i det omgivande klimatskalet där transmissionen utgör en stor del av energiläckaget. Syftet med arbetet är att öka kunskapen om energieffektiva åtgärder vid renovering av klimatskal hos industrilokaler.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

To invest money in funds is increasing rapidly in popularity and one of the biggest reasons is that banks are offering a greater range of funds. Information about funds is always easy to find and it is easy to invest money in a fund because the bank takes care of all the management of the fund.The essay examines two funds from two different countries with an aim to choose the one with best potential yield. The first fund is entirely invested in North America and the second fund invests in Asia, with most of its possessions in companies from China. Both these funds invest in wellknown companies in respective region. The essay is limited to compare these funds with data from 2005 to 2009.Information was collected from Morningstar and Avanza Bank for the quantitative examination.

The main purpose of this essay is to investigate if Latvia´s pattern of trade has become more similar to the mature market economies, after Latvia´s independence 1991.Today, the intra-industry trade (IIT) dominates the trade of mature market economies. One of the pioneers of intra-industrial trade is Paul Krugman, who was the first to emphasize the importance "of scale and consumers' desire for variety" in explaining the basis for modern commerce. Customers get more variety and usually cheaper goods when the market gets bigger. I mainly use the modern trade theories to explain the trade pattern in Latvia. To measure how Latvia has developed its intra-industry trade, and thereby is approaching the mature market economies´ trade pattern, I use the Grubel-Lloyd index (GL-index).

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

Denna rapport beskriver en produktutvecklingsprocess som behandlar utvecklandet av ett textilt material som isolerar och skyddar. Det textila materialet ska fungera till ett kylande fodral utan att förstöra dess funktion och behöver därför uppfylla en speciell kravspecifikation. Materialet ska isolera mot kroppsvärme, vara stabilt, skyddande och slitstarkt. Dubbelväv valdes tidigt i arbetet då det är ett enkelt sätt att kunna påverka det textila materialets egenskaper i form av material- och konstruktionsval, i en betydligt större utsträckning än i en enkelsidig väv. För att utveckla ett material med de efterfrågade egenskaperna har tester utförs och den metod som har använts är hypotesprövning.

The real estate company Ihus is facing an expansion of its comfort cooling in Noatun,Uppsala, to provide the buildings in the block with cooling. The buildings in Noatunare mainly used for office premises, where the requirements for an accepted indoorclimate is great. However, it?s uncertain whether Ihus should continue, as currently,producing comfort cooling by themselves using a compressor chiller, or if they shouldconnect themselves to Vattenfall?s district cooling net.The purpose of this report is to examine which technique of cooling is best suited forIhus and their buildings in Noatun. It should also work as a guideline for othercompanies facing the same problem as Ihus.

The purpose with this thesis is to get a compilation of all the critical bolted joints of all enginesproduced at LV Motors. ABB LV Motors produces induction engines with seven shaft heights. Eachengine size exists several variants of components ex. standard shield and flange shield. Depending onwhich components the engine is equipped with arises various types of strains in the engine's parts,certain assembly ways are more favourable than other.The most critical parts in the engine from a mechanical point of view are the screw units betweenshield/stator, feet/stator and bearing cover/shield.

Fukthantering är idag, trots god kunskap inom ämnet, ett stort problem inom byggproduktion då tunga betongstommar ska torkas ut under pressade tidsplaner. Det finns en uppsjö av beräkningsmetoder och hjälpmedel, exempelvis ByggaF och Torka S. Däremot finns inget enkelt sätt att kombinera uttorkning, energiåtgång och kostnader som är användbart i produktionen.Miljön är kanske ett av det här århundradets största samhällsproblem. Lokala brister kan få globala konsekvenser och för att bygga ett hållbart samhälle måste detaljnivån studeras. Byggbranschen är en stor energibrukare där stor vikt på energibesparingar läggs i förvaltningsskedet, medan det försummas i produktionsskedet.