The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

The aim of this study was to develop and psychometrically evaluate an instrument for measuring the impact from chronic pain on daily life. Traditionally psychometric evaluation is done with parametric methods even if the items are ordinal data. In this study the instrument to be developed is solely based on ordinal data, and the psychometrically evaluation is done with both traditional methods (i.e. parametric statistics) as well as with non-parametric methods. These two different ways of psychometrically evaluation are then compared with each other.

HiGtech är en projektgrupp på Högskolan i Gävle vilka konstruerar och bygger energisnåla tävlingsfordon. Ett av fordonen tävlar i Shell Eco Marathons prototypklass för bensindrivna förbränningsmotorer och drivs av en på högskolan konstruerad motor. Motorns effekt överförs till en kedjetransmission via en inköpt och modifierad centrifugalkoppling. Den nuvarande centrifugalkopplingen väger cirka 1,5 kg. Då en stor faktor för tävlingsresultatet är fordonets rullmotstånd, vilken beror av fordonets vikt, har målet med detta arbete varit att konstruera en specialanpassad centrifugalkoppling, vars vikt endast är hälften så stor som motorns nuvarande koppling.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

Detta examensarbete är ett förarbete till en utveckling av en kalkylmodell för regionnät. Syftet var att undersöka vilka faktorer som påverkar ett projekts utfall samt att ge förslag på hur Linjemontage kan utveckla sin organisation och ett förslag på en ny tidrapport har framtagits, för att få en klarare bild av hur stor del av projektets olika delmoment verkligen tog, i förhållande till uppskattad tid.De faktorer som anses vara påverkande vid ett projekts utfall är markägare, som kan vara svåra att komma i kontakt med, och svåra att nå en gemensam lösning med. Även avbrottstider planerade enligt förprojekteringen vilka inte accepteras av elnätsägaren. Material som blir fellevererat och förseningar av leveranser. Fel i handlingar till exempel bygghandlingar och felaktig design av konstruktörer.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.

Ett undersöknings- och utvecklingsarbete för att lösa ett problem med att dränkbara pumpar i ett vattenavrinningssystem gick sönder med perioder på två år i genomsnitt, utfördes i samarbete med Cementa AB i Skövde. Orsak till pumpars haveri söktes och fanns vara bristande rutiner och kunskap om det underhåll pumparna krävde. För att lösa detta problem utvecklades riktlinjer för nyinköp av torruppställda pumpar för att möjliggöra kontinuerligt underhåll. Då möjligheter för placering av torruppställd pump saknades utvecklades ett pumpfundament för placering av torruppställd pump. Krav för utvecklingsarbetet togs fram i samarbete med Cementas underhållsavdelning och teoretisk dimensionering av dränkbara länspumpars dåvarande volymflödeskapacitet utfördes.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.

Kranlaster som verkar på kranbanor varierar med tiden och kan inte behandlas som statiska laster, detta gör att en statisk beräkning inte är tillräckligt säker, därför bör kranbalkar utformas på så sett att den klarar av statiska såväl som dynamiska kranlaster.Arbetet valdes efter förstudier som gjordes på internet för att få grundläggande kunskap om ämnet. Informationen söktes på svenska, engelska och tyska för att kunna hitta relevanta och pålitliga källor som behandlar traverskranbanor enligt eurokod. Tack vare råd från Björn Åsted från Stålbyggnadsinstitutet (SBI), kunde en bok på tyska hittas. För att kunna jämföra resultaten används ett svenskt program CraneGirder EC3 under arbetet.Rapporten innehåller en beräkningsmodell för en valsad profil balk, beräkningar baserades på eurokod ekvationer och föreskrifter vilket var som dimensionerings underlag för arbetet. I denna rapport hänvisas hur en kranbana skall dimensioneras med hög utnyttjandegrad, ett antal kontroller gjordes för att säkerställa att balken och dess detaljer, såsom räl och svets är säkert utformade mot utmattning och deformation.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

Biogas is a gaseous fuel, rich in methane, produced through a biological route in an anaerobic digester. A gas engine generates combined heat and power, which can be used at the farm to reduce energy cost. The process also generates a digestate, with better utilization of nutrient compared to cattle manure. The aim of this study is to analyze the profitability of a farm-scale biogas plant for combined heat and power (CHP) at Wapnö. Wapnö is an agriculture company located in the southern part of Sweden.