The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Då producerande företag ska göra genomgripande verksamhetsförändringar såsom implementera produktionssystemet lean, kan det vara svårt att på förhand veta förändringarnas effekter.  Lean innebär att ledtider kortas men nya arbetssätt och verktyg bidrar till att kostnaderna initialt ofta ökar i förändringsarbete, vilket kan utmynna i en skepticism mot det nya systemet hos de anställda. Med hjälp av verktyg som mäter effekterna av förändringarna skulle denna skepticism kunna mötas. För att erhålla ett helhetsperspektiv ses produktion helst ur ett flödesperspektiv och idag finns inget bra verktyg som analyserar produktionsflöden ur både ledtids- och kostnadsperspektiv. Därför syftar detta arbete till att ta fram en modell för beräkning av ledtider och kostnader i ett produktionsflöde på ett sätt som möjliggör förståelse från flera olika intressentgrupper. Detta uppnås dels genom att den som använder modellen (1) erhåller en övergripande förståelse för flödets uppbyggnad och allokalisering av dess ledtider och kostnader samt (2) kan använda modellen för att analysera olika framtida scenarier vilka ligger till grund för förändringsarbetet.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

Fartyg använder sig av stora dieselmotorer för framdrift och för att producera elektricitet ombord. Motorerna samt diverse kringsystem har behov av kylning och till detta används kemikaliebehandlat vatten i ett slutet kylsystem. Vid tömning och läckage från systemet tenderar det kemikaliebehandlade vattnet att hamna med länsvattnet. Länsvattnet genomgår en reningsprocess innan det pumpas överbord. Denna reningsprocess är inte utformad för att avskilja kemikalier och dessa tenderar att hamna i havet.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

Due to the growth of multinational concerns during the last decades, with large parts of international trade involving such corporations, the field of transfer pricing, including financial transactions such as internal loans, have received a great deal of attention in tax legislation. The internationally accepted foundation for transfer pricing is the so called Arm's length principle, expressed in Swedish law through the "Korrigeringsregeln". In the Diligentia court case, the concepts of transparency and control were given a crucial role in the calculation of an Arm's length's price of interest rates. The Swedish tax agency interpreted the ruling in that case as if a parent company always can be assumed to enjoy sufficient transparency and control to reduce the risk on their debt obligations. A great deal of uncertainty therefore surrounded their position and to what extent the Diligentia-ruling could be cited as precedent.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

At Forsmark nuclear power plant the rather old-fashioned software COPTA is used in containment safety analysis. There exists a desire within the organisation to introduce a more modern software with ability to more detailed modeling and increased usability.The goal of this thesis was to evaluate the software APROS in containment safety analysis. APROS models describing one of the containments at Forsmark NPP have been developed. Two simulations of typical containment incidents, one of them a large pipe break, have been made where containment safety parameters such as pressure and temperature are studied. Results are analyzed and verified against results from corresponding COPTA models.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.